Professional Documents
Culture Documents
Aerospace Engineering
Mecanica de fluidos II
Report of Lab
21659238
Índex
Objectives..........................................................................................................................................3
Results and Graphic...........................................................................................................................3
Tables.................................................................................................................................................7
Questions...........................................................................................................................................8
Objectives
The objective of this laboratory is to be able to use ANSYS and put into
practice what has been studied during the lectures.
1. Residual History
2
2. Centerline Pressure Distribution
3
4. Wall Shear Stress Distribution
5. Profiles Of Axial Velocity at all Streamwise locations (10. 20. 40. 60.
100)
4
6. Contour of Radial Velocity
8.
Mesh
5
Tables
6
Wall Shear Stress
Questions
Error Factor
Factor CFD=0.942
Factor AFD=0.097747231
Error= 3.83
Can you use centerline pressure distribution to determine the “developing
length”? Why?
7
it is not possible because the line is linear and the pressure decreases as it
passes through the pipe.