Professional Documents
Culture Documents
WWW.ICSA.US 1
INTERNATIONAL INSTITUTE OF COMPUTER SCIENCE AND ADMINISTRATION
INTORDUCTION TO CorelDraw
WWW.ICSA.US 2
INTERNATIONAL INSTITUTE OF COMPUTER SCIENCE AND ADMINISTRATION
Get started
WWW.ICSA.US 3
INTERNATIONAL INSTITUTE OF COMPUTER SCIENCE AND ADMINISTRATION
Bitmap Graphics
Bitmap Graphics also referred to as Raster Graphics made up of different
colored pixels appears as an image. The color information about the image
is stored in individual Small Squares (pixels) within a grid. Raster images
are edited at the pixel level. The colors of any one pixel of raster image
can be changed individually. The Raster graphics are compatible with such
raster based software as Adobe Photoshop or Corel photo paint.
Figure 1.1
Figure 1.2 shows the same image magnified. The red marked area shows
the individual pixels of the image. As the figure illustrates, each pixel has
an assigned color. Bitmap images are not easily scalable. They are used
for photorealistic.
Figure 1.2
WWW.ICSA.US 4
INTERNATIONAL INSTITUTE OF COMPUTER SCIENCE AND ADMINISTRATION
Vector Graphics
Vector Graphics are mathematically-based made up of shapes. These
shapes are defined by points along their edges that control the direction
and bend of the shape. Vector-based image are independent of one
another. Each object can be edited and scaled individually without
distortion and lose of any single detail. The vector graphics are compatible
with such vector based software as Corel Draw or Adobe Illustrator.
Figure 2.1 shows a vector image. A vector image records the point on
the lines, their angles and what color they are filled with, which is usually
much less data than a raster image. You can scale a vector as many as
you want but it will maintain the same quality and sharpness. Vector-
based images are good for illustration and can be scaled without
distortion, but are not as good for photorealistic.
Figure 2.1
WWW.ICSA.US 5
INTERNATIONAL INSTITUTE OF COMPUTER SCIENCE AND ADMINISTRATION
CorelDraw Interface
WWW.ICSA.US 6
INTERNATIONAL INSTITUTE OF COMPUTER SCIENCE AND ADMINISTRATION
Standard Toolbar
You can apply the most commonly used commands from the standard
tool bar such as NEW, OPEN, SAVE, PRINT, CUT, COPY, PASTE, UNDO,
REDO, etc. It can be customized according to your specific needs.
Property Bar
The Property Bar is context sensitive bar. This enables you to access all
the particular commands that are specific to the selected tool or feature
you are using.
Main Tool Box
By default it is located at the left side of the window. It is dock able, can
be located anywhere on the work area. The main tools you will use are
accessed from this bar.
Rulers
WWW.ICSA.US 7
INTERNATIONAL INSTITUTE OF COMPUTER SCIENCE AND ADMINISTRATION
Color Palette
By default the Color Palette is located to the right side of the window. It
can also be relocated according to your desire place in work area. You can
choose any color just in a single click. You can also use any specific color
system such as CMYK, RGB etc.
Status Bar
The Status Bar gives you the properties of object such as the fill or size.
It also shows the information about the mouse cursor movements
Page Navigator
The Page Navigator is used to add, delete, move and rename the page.
When a file contains multiple pages, page tabs appear to the right side of
the Page Navigator. That tabs contain the default page number to help
you to track your desire page.
WWW.ICSA.US 8
INTERNATIONAL INSTITUTE OF COMPUTER SCIENCE AND ADMINISTRATION
WWW.ICSA.US 9
INTERNATIONAL INSTITUTE OF COMPUTER SCIENCE AND ADMINISTRATION
Ellipse Tool Flyout Contains Ellipse Tool and the 3-point Ellipse
Tool.
WWW.ICSA.US 10
INTERNATIONAL INSTITUTE OF COMPUTER SCIENCE AND ADMINISTRATION
WWW.ICSA.US 11
INTERNATIONAL INSTITUTE OF COMPUTER SCIENCE AND ADMINISTRATION
WWW.ICSA.US 12
INTERNATIONAL INSTITUTE OF COMPUTER SCIENCE AND ADMINISTRATION
WWW.ICSA.US 13
INTERNATIONAL INSTITUTE OF COMPUTER SCIENCE AND ADMINISTRATION
WWW.ICSA.US 14
INTERNATIONAL INSTITUTE OF COMPUTER SCIENCE AND ADMINISTRATION
WWW.ICSA.US 15
INTERNATIONAL INSTITUTE OF COMPUTER SCIENCE AND ADMINISTRATION
WWW.ICSA.US 16
INTERNATIONAL INSTITUTE OF COMPUTER SCIENCE AND ADMINISTRATION
WWW.ICSA.US 17
INTERNATIONAL INSTITUTE OF COMPUTER SCIENCE AND ADMINISTRATION
WWW.ICSA.US 18
INTERNATIONAL INSTITUTE OF COMPUTER SCIENCE AND ADMINISTRATION
WWW.ICSA.US 19
INTERNATIONAL INSTITUTE OF COMPUTER SCIENCE AND ADMINISTRATION
WWW.ICSA.US 20
INTERNATIONAL INSTITUTE OF COMPUTER SCIENCE AND ADMINISTRATION
WWW.ICSA.US 21
INTERNATIONAL INSTITUTE OF COMPUTER SCIENCE AND ADMINISTRATION
WWW.ICSA.US 22
INTERNATIONAL INSTITUTE OF COMPUTER SCIENCE AND ADMINISTRATION
WWW.ICSA.US 23
INTERNATIONAL INSTITUTE OF COMPUTER SCIENCE AND ADMINISTRATION
3. Right click on any color in the color palette located at the right side
of the window. The outline color will change to that color.
Note: If you right click on white color in color pellet, the out line may seem to be
disappeared. But its still there because you won't be able to see white line on white
background.
4. Now right click on any color other than white. The color will be
changed according to the color you select in swatches pellet. Try to
experiment with different colors.
WWW.ICSA.US 24
INTERNATIONAL INSTITUTE OF COMPUTER SCIENCE AND ADMINISTRATION
5. Click and hold the mouse cursor on Outline Tool to reveal all
7. You can try the different thickness available in the Outline Tool.
8. Observe the color palette carefully in this figure below. There is a
cross with no fill on the top. (Marked with red circle).
WWW.ICSA.US 25
INTERNATIONAL INSTITUTE OF COMPUTER SCIENCE AND ADMINISTRATION
WWW.ICSA.US 26
INTERNATIONAL INSTITUTE OF COMPUTER SCIENCE AND ADMINISTRATION
In this lesson we will be learning about the basics of fill in Corel DRAW.
Open Corel DRAW. Draw rectangle. Keep it selected.
Click on any color from the color palette. The object is filled with color.
Increase the thickness of the outline to see the difference in the colors
prominently as shown below.
If you right click on the same color in color swatches, outline will be
colored with red. Now we can’t see the border around the object as the
border is merged with the fill since we have used same color for both.
WWW.ICSA.US 27
INTERNATIONAL INSTITUTE OF COMPUTER SCIENCE AND ADMINISTRATION
Click on the cross mark at the top of the color palette (Marked with red circle).
The color is removed and you again get the object with outline.
Please remember that cross filled icon on the top of the color palette is
used to remove fill when clicked normally (Left side) and it removes
outline when clicked with right button.
Click on Fill Tool from toolbox (marked with red circle).
The first option is "Fill Color Dialog". Click it and you will get "Uniform Fill"
dialog box. Click on any color or the shade but do not change any
settings. Click ok.
The object will be filled with the color you have selected.
WWW.ICSA.US 28
INTERNATIONAL INSTITUTE OF COMPUTER SCIENCE AND ADMINISTRATION
Exercise No. 1
Click on Ellipse Tool in the Tool Box and draw an oval shape as
shown below.
Select Pick Tool and double click on the oval > Howard your
mouse over the corner and rotate it as shown below.
WWW.ICSA.US 29
INTERNATIONAL INSTITUTE OF COMPUTER SCIENCE AND ADMINISTRATION
Select letter "V" with Pick Tool and click exact on the mid point
of the letter. The bend arrows appear around the letter. Bring the
mouse curser to the arrow and rotate it as shown in this figure.
Click on Pick Tool > Drag a window around the text as shown
below.
WWW.ICSA.US 30
INTERNATIONAL INSTITUTE OF COMPUTER SCIENCE AND ADMINISTRATION
Exercise No. 2
Select rectangle with Pick Tool and press "+" key from keyboard.
(by pressing "+" key you will be having another copy of selected object)
Bring your mouse exact over the vertical mid point of the object as shown
below.
WWW.ICSA.US 31
INTERNATIONAL INSTITUTE OF COMPUTER SCIENCE AND ADMINISTRATION
Hold down the Shift key and drag this point inside to resize it
(By holding Shift key the object will be resize from both side.)
Now bring your mouse exact over the horizontal mid point at
the bottom of the object and move this point up until you get the desire
size.
WWW.ICSA.US 32
INTERNATIONAL INSTITUTE OF COMPUTER SCIENCE AND ADMINISTRATION
Select it with Pick Tool and place at the bottom of the page.
Click on Text Tool in the Tool Box > Type text EEZEE.
Select text with Pick Tool > In the Menu Bar > Click on
Arrange > Break Artistic Text.
Select each letter one by one and try to rearrange as shown below.
WWW.ICSA.US 33
INTERNATIONAL INSTITUTE OF COMPUTER SCIENCE AND ADMINISTRATION
Click on Pick Tool > Drag window around the text and group it once
again.
Right click on whit color to fill outline and left click on this button
WWW.ICSA.US 34
INTERNATIONAL INSTITUTE OF COMPUTER SCIENCE AND ADMINISTRATION
Exercise No. 3
WWW.ICSA.US 35
INTERNATIONAL INSTITUTE OF COMPUTER SCIENCE AND ADMINISTRATION
Select it with Pick Tool > Press "+" key to duplicate it.
Resize it from left to right as shown here and fill it with red.
In the Property Bar > Click on this button to lock the round corner
together and type radius 20 in Rectangle Corner Roundness field.
Hit Enter key from the keyboard to apply the radius you specified.
(so we got a rounded rectangle here.)
WWW.ICSA.US 36
INTERNATIONAL INSTITUTE OF COMPUTER SCIENCE AND ADMINISTRATION
Select it with Pick Tool > Press "+" key from the keyboard to
duplicate it.
Hold down Shift key and resize it from corner so it is smaller than the
actual as shown below.
Select the duplicate one > Fill it with blue as well as select the outer
square and apply just blue Outline (No Fill)
(Note: outline can be resize in Hairline dropdown field in the Property Bar)
Draw three rectangles as shown below > Fill Navy Blue color.
Use Pick Tool to select all of them together > Click exact on the mid
point and skew upside as shown below.
WWW.ICSA.US 37
INTERNATIONAL INSTITUTE OF COMPUTER SCIENCE AND ADMINISTRATION
Select it with Pick Tool > Press "+" key from the keyboard to
duplicate it.
Hold down Shift key and resize it from corner so it is smaller than the
actual as shown below.
(By holding Shift key the object will be resize proportionally form the center point.)
Select the duplicate one > Fill it with blue as well as select the outer
square and apply just blue Outline (No Fill).
WWW.ICSA.US 38
INTERNATIONAL INSTITUTE OF COMPUTER SCIENCE AND ADMINISTRATION
Exercise No. 4
.
Follow the instruction given below.
WWW.ICSA.US 39
INTERNATIONAL INSTITUTE OF COMPUTER SCIENCE AND ADMINISTRATION
Select it with Pick Tool >press “+” key to duplicate and position it
to the proper place.
Draw a rectangle once again > Rotate it as shown in this figure below.
Select both the orange background and rectangle with Pick Tool .
(The multiple objects selection control appears in the Property Bar).
WWW.ICSA.US 40
INTERNATIONAL INSTITUTE OF COMPUTER SCIENCE AND ADMINISTRATION
Delete the rectangle which is indicated below > Fill this intersected
Object with yellow.
Select yellow object with Pick Tool , press "+" key to duplicate it.
Fill it with some dark color.
Hold down Ctrl key and hit Page Down Key several time to send it
Back to the original.
Use arrow keys to position it as shown below.
Draw another rectangle > Fill it with dark blue and rotate it.
WWW.ICSA.US 41
INTERNATIONAL INSTITUTE OF COMPUTER SCIENCE AND ADMINISTRATION
Type text “Brain” > Fill navy blue color > Apply whit color outline with
3pt Hairline size.
Type rest of the text.
Note: (To fill different colors in the text. Highlight the letters one
by one with Text Tool and pick color from the pellet)
WWW.ICSA.US 42
INTERNATIONAL INSTITUTE OF COMPUTER SCIENCE AND ADMINISTRATION
Exercise No. 5
Create a letter size document > From the Property Bar > Change Page
orientation to Landscape.
Draw a rectangle shape, fill it with blue.
Type text “ICSA” > Select it with Pick Tool and place it over the
rectangle.
Change font style to IMPACT > Fill text with yellow.
Click on Pick Tool > Draw a window around text and rectangle to
select both.
The intersect part is still selected > Use Ctrl + Page up key to bring this
intersected part front.
WWW.ICSA.US 43
INTERNATIONAL INSTITUTE OF COMPUTER SCIENCE AND ADMINISTRATION
Select all with Pick Tool > In the Menu Bar > Click on Arrange >
Group.
WWW.ICSA.US 44
INTERNATIONAL INSTITUTE OF COMPUTER SCIENCE AND ADMINISTRATION
Exercise No. 6
WWW.ICSA.US 45
INTERNATIONAL INSTITUTE OF COMPUTER SCIENCE AND ADMINISTRATION
WWW.ICSA.US 46
INTERNATIONAL INSTITUTE OF COMPUTER SCIENCE AND ADMINISTRATION
Select it with Pick Tool . Press "+" key two time to duplicate it twice
as shown below.
Select the third line >In the Property Bar > change line style to Dotted
line.
WWW.ICSA.US 47
INTERNATIONAL INSTITUTE OF COMPUTER SCIENCE AND ADMINISTRATION
Click on Freehand Tool in the Tool Box > Select Pen Tool.
Draw an open path > specify Hairline 8pt
Type text "SOFT", Select each letter one by one and fill your desire color.
WWW.ICSA.US 48
INTERNATIONAL INSTITUTE OF COMPUTER SCIENCE AND ADMINISTRATION
Exercise No. 7
In the Property Bar > Click this button to apply rounded corner
together.
Specify 100 radios and press Enter key from the keyboard.
WWW.ICSA.US 49
INTERNATIONAL INSTITUTE OF COMPUTER SCIENCE AND ADMINISTRATION
Select it with the Pick Tool > Press “+” key to duplicate it.
Fill Black Color from Color Swatch.
In order to send it back to the yellow use Ctrl + Page down key several
times.
Hold Down Shift key and resize it from the corners as shown here.
Draw a circle >Fill it with black > Send it back to the yellow (Ctrl + Page
down).
WWW.ICSA.US 50
INTERNATIONAL INSTITUTE OF COMPUTER SCIENCE AND ADMINISTRATION
Exercise No. 8
Type text "YOUR". Select text with Pick Tool > Hold down shift
key and click on blue circle. (The text and circle is selected together).
WWW.ICSA.US 51
INTERNATIONAL INSTITUTE OF COMPUTER SCIENCE AND ADMINISTRATION
In the Menu Bar > Click on the Text > Choose “Fit Text to Path".
Select it with Pick Tool > Hold down Sift key and click on black
Circle.
(The text and the circle is selected together).
Follow the same procedure mention above to Fit text over the path and
adjust it at the bottom of the circle.
WWW.ICSA.US 52
INTERNATIONAL INSTITUTE OF COMPUTER SCIENCE AND ADMINISTRATION
Dialog
Apply same settings as shown below.
WWW.ICSA.US 53
INTERNATIONAL INSTITUTE OF COMPUTER SCIENCE AND ADMINISTRATION
From Property Bar .click on "End Arrow Head Selector" and choose
Square Head.
WWW.ICSA.US 54
INTERNATIONAL INSTITUTE OF COMPUTER SCIENCE AND ADMINISTRATION
Exercise No. 9
Dialog
Click on Preset Drop down in Fountain Fill Dialog and Choose any
predefine Gradient Style.
Make same settings as shown below in this figure.
Select this text with Pick Tool and Place it over the circle.
Select both the text and the circle together.
WWW.ICSA.US 55
INTERNATIONAL INSTITUTE OF COMPUTER SCIENCE AND ADMINISTRATION
Now select circle with Pick Tool and hit Delete key from the
keyboard.
WWW.ICSA.US 56
INTERNATIONAL INSTITUTE OF COMPUTER SCIENCE AND ADMINISTRATION
Exercise No. 10
Click on Ellipse Tool in the Tool Box and draw an oval shape.
WWW.ICSA.US 57
INTERNATIONAL INSTITUTE OF COMPUTER SCIENCE AND ADMINISTRATION
Select this oval with Pick Tool > Click in the center point.
(The bend arrows appears around the oval).
Click and hold your mouse on Interactive Blend Tool in the Tool
Box to reveal all other additional Tools > Point to Interactive Drop
Shadow Tool.
From the Property Bar > Choose Preset Medium Glow and Change
Drop Shadow color to light blue
WWW.ICSA.US 58
INTERNATIONAL INSTITUTE OF COMPUTER SCIENCE AND ADMINISTRATION
Now select the Trimmed part with Pick Tool and move it over the
Blue Gradient Shape.
Type Text "h s" and adjust it.
WWW.ICSA.US 59
INTERNATIONAL INSTITUTE OF COMPUTER SCIENCE AND ADMINISTRATION
Exercise No. 11
Click and hold your mouse over Interactive Blend Tool to get all
other additional Tools > Choose Interactive Extrude Tool.
Bring the cursor inside the rectangle. The cursor will change. Press and
drag the cursor to the top right corner as shown below.
WWW.ICSA.US 60
INTERNATIONAL INSTITUTE OF COMPUTER SCIENCE AND ADMINISTRATION
.
Type text "CITC" > Choose font style IMPACT > Fill it with yellow color.
Apply red color outline and keep the text selected.
Click and hold your mouse over Interactive Blend Tool to get all
other additional Tools and once again choose Interactive Extrude Tool.
Bring the cursor inside the text. The cursor will change. Press and drag
the cursor to the top right corner.
To fill this 3D style with Gradient color > From the Property Bar > Click
WWW.ICSA.US 61
INTERNATIONAL INSTITUTE OF COMPUTER SCIENCE AND ADMINISTRATION
Click and hold the mouse over Interactive Blend Tool to reveal all
other additional Tools and choose Interactive Drop shadow Tool.
From the Property Bar > choose Preset Top Left which is indicated.
WWW.ICSA.US 62
INTERNATIONAL INSTITUTE OF COMPUTER SCIENCE AND ADMINISTRATION
(Now this piece of text is having 3D style with drop shadow effect but you may notice the
3D style looks transparent and drop shadow appears across the 3D style. The drop
shadow effect should be behind the 3D Style. Let’s fix this.)
Select text with pick Tool and choose once again Interactive
Extrude Tool.
WWW.ICSA.US 63
INTERNATIONAL INSTITUTE OF COMPUTER SCIENCE AND ADMINISTRATION
Exercise No. 12
WWW.ICSA.US 64
INTERNATIONAL INSTITUTE OF COMPUTER SCIENCE AND ADMINISTRATION
field.
Press Enter key to apply.
Fill it with Green and apply black color Hairline (4.0 pt).
(Repeat same procedure with the rest of the pie shapes and change color of
each.)
WWW.ICSA.US 65
INTERNATIONAL INSTITUTE OF COMPUTER SCIENCE AND ADMINISTRATION
Click on Ellipse Tool in the Tool Box > From the Property Bar >
Click and hold the curser over Free Hand Tool to reveal all other
additional Tools and select Artistic Media
Tool .
WWW.ICSA.US 66
INTERNATIONAL INSTITUTE OF COMPUTER SCIENCE AND ADMINISTRATION
Specify the width of Selected preset in Artistic Media Tool Width Box.
WWW.ICSA.US 67
INTERNATIONAL INSTITUTE OF COMPUTER SCIENCE AND ADMINISTRATION
Exercise No. 13
Click and hold the mouse over "Polygon Tool" to reveal all other
additional Tools > Select "Graph Paper
Tool" .
In the Property Bar specify 4 columns and 3 rows in "Graph Paper
WWW.ICSA.US 68
INTERNATIONAL INSTITUTE OF COMPUTER SCIENCE AND ADMINISTRATION
Click on Spiral Tool (it is just next to the Graph Paper Tool).
WWW.ICSA.US 69
INTERNATIONAL INSTITUTE OF COMPUTER SCIENCE AND ADMINISTRATION
Draw a Spiral as shown below > Apply outline color gray, size 2.0pt and
keep selected.
Select it with "Pick Tool" > Hit "+" key to duplicate it.
In the Property Bar > click on horizontal & vertical Mirror
WWW.ICSA.US 70
INTERNATIONAL INSTITUTE OF COMPUTER SCIENCE AND ADMINISTRATION
Select both Spirals with "Pick Tool" > Apply Group command
>Duplicate twice and place them over the Graph.
polygon" field .
Draw a Polygon Shape.
Duplicate it 5 times > Align and position all the objects as shown below.
In the Property Bar > Type 4pt in "Hairline" field to specify the outline
size > Fill green outline color.
WWW.ICSA.US 71
INTERNATIONAL INSTITUTE OF COMPUTER SCIENCE AND ADMINISTRATION
Select all the objects with Pick Tool > Apply Group command and
rotate them.
WWW.ICSA.US 72
INTERNATIONAL INSTITUTE OF COMPUTER SCIENCE AND ADMINISTRATION
Exercise No. 14
Type width 9cm x height 5cm in Paper Width and Height field.
To apply the corner radius, In the Property Bar > Click on "Corner
round together" button.
WWW.ICSA.US 73
INTERNATIONAL INSTITUTE OF COMPUTER SCIENCE AND ADMINISTRATION
Type "20" in "Right Rectangle Corner Roundness" field > Hit Enter
Create another rectangle > Fill it with yellow color and adjust it as shown
below.
WWW.ICSA.US 74
INTERNATIONAL INSTITUTE OF COMPUTER SCIENCE AND ADMINISTRATION
From the Property Bar > Click on Horizontal Mirror Button to flip it
horizontally.
WWW.ICSA.US 75
INTERNATIONAL INSTITUTE OF COMPUTER SCIENCE AND ADMINISTRATION
Draw a small rectangle with "20%" radius. (To apply the radius, follow the same
procedure mentioned above.)
Duplicate it three times > From the Property Bar > Apply Mirror to flip
horizontally and place them over the yellow rounded rectangle.
In the Menu Bar > Click on "TEXT" menu > Click “Insert Symbol
Character".
("Insert Character" Docker appears at the right side of the screen).
Click on "Font" drop down arrow and select "webdings".
WWW.ICSA.US 76
INTERNATIONAL INSTITUTE OF COMPUTER SCIENCE AND ADMINISTRATION
Select world map and Telephone shape and click INSERT button
WWW.ICSA.US 77
INTERNATIONAL INSTITUTE OF COMPUTER SCIENCE AND ADMINISTRATION
Exercise No. 15
In the Property Bar > Type "100" radius in lower left and right "corner
Click and hold the mouse curser over the Fill Tool to reveal all other
WWW.ICSA.US 78
INTERNATIONAL INSTITUTE OF COMPUTER SCIENCE AND ADMINISTRATION
Select this object with "Pick Tool" > Press "+" key to duplicate it.
Hold down Shift key and make it small.
From the Property Bar > Click on Horizontal Mirror Button to flip it
horizontally.
____
Now type rest of the text.
WWW.ICSA.US 79
INTERNATIONAL INSTITUTE OF COMPUTER SCIENCE AND ADMINISTRATION
Exercise No. 16
WWW.ICSA.US 80
INTERNATIONAL INSTITUTE OF COMPUTER SCIENCE AND ADMINISTRATION
>Use “Ctrl+ Page Down” key to send it back to the mouse shape.
Select both the line and mouse shape together with Pick Tool .
Click and hold the mouse curser over Interactive Blend Tool to
reveal all other additional Tools and choose Interactive Drop shadow
Tool.
From the Property Bar > choose Preset Flat Bottom which is indicated.
WWW.ICSA.US 81
INTERNATIONAL INSTITUTE OF COMPUTER SCIENCE AND ADMINISTRATION
Select all the objects with Pick Tool and Group them.
WWW.ICSA.US 82
INTERNATIONAL INSTITUTE OF COMPUTER SCIENCE AND ADMINISTRATION
Exercise No. 17
Select it with Pick Tool > Press "+" key from the keyboard to
duplicate it.
Hold down Shift key and resize it from corner so it is smaller than the
actual as shown below.
(By holding Shift key the object will be resize proportionally form the center point.)
WWW.ICSA.US 83
INTERNATIONAL INSTITUTE OF COMPUTER SCIENCE AND ADMINISTRATION
Click on Fill Tool in Tool Box > Point to Fountain Fill Dialog
Apply Radial Gradient Type with the proper combination of two colors as
shown here.
Use Pick Tool to Select both the ring and rectangle together.
WWW.ICSA.US 84
INTERNATIONAL INSTITUTE OF COMPUTER SCIENCE AND ADMINISTRATION
Select the intersected part with Pick Tool . Use Ctrl+ Page Up key to
bring it up to the duplicated ring.
Select the Duplicate ring and intersected part together with
Pick Tool .
WWW.ICSA.US 85
INTERNATIONAL INSTITUTE OF COMPUTER SCIENCE AND ADMINISTRATION
Exercise No. 18
Select the Top rectangle with Pick Tool > Click exact over the mid
point.
Move your mouse over the horizontally directed arrow and skew it left to
right.
WWW.ICSA.US 86
INTERNATIONAL INSTITUTE OF COMPUTER SCIENCE AND ADMINISTRATION
Select the Left side rectangle with Pick Tool > Click exact over the
mid point and skew it upside as shown below.
Select the Top rectangle with Pick Tool > Press "+" key to duplicate
and move it down to show the water level.
WWW.ICSA.US 87
INTERNATIONAL INSTITUTE OF COMPUTER SCIENCE AND ADMINISTRATION
Once again duplicate this Top rectangle and bring it down to specify the
bottom of the aquarium.
Align and position all objects as shown below. So we got this 3d box.
Apply gray color outline.
WWW.ICSA.US 88
INTERNATIONAL INSTITUTE OF COMPUTER SCIENCE AND ADMINISTRATION
Click and hold the mouse over "Interactive Blend Tool" to reveal all
other additional Tools > Choose "Interactive Transparency Tool"
.
("Interactive Transparency" control appears in the Property Bar).
Choose "Uniform" from the "Transparency Type" drop down to reduce
the opacity of selected object
WWW.ICSA.US 89
INTERNATIONAL INSTITUTE OF COMPUTER SCIENCE AND ADMINISTRATION
Draw another rectangle shape to show the water from the right side. >
Skew it up vertically.
WWW.ICSA.US 90
INTERNATIONAL INSTITUTE OF COMPUTER SCIENCE AND ADMINISTRATION
Click and hold the mouse over "Fill Tool" to reveal all other
additional Tools.
WWW.ICSA.US 91
INTERNATIONAL INSTITUTE OF COMPUTER SCIENCE AND ADMINISTRATION
Click and hold the mouse over "Freehand Tool" to reveal all other
additional Tools.
Select all objects with Pick Tool > and apply Group (Ctrl+ G).
WWW.ICSA.US 92
INTERNATIONAL INSTITUTE OF COMPUTER SCIENCE AND ADMINISTRATION
Exercise No. 19
Select oval with Pick Tool >Hit Delete key from the keyboard.
WWW.ICSA.US 93
INTERNATIONAL INSTITUTE OF COMPUTER SCIENCE AND ADMINISTRATION
Type letters "GSM" > Change font style to "Bank Gothic MT" or any
Draw 6 rectangle shapes > Align and position all of them as shown below.
Select all the rectangle shapes with Pick Tool and apply "Weld"
WWW.ICSA.US 94
INTERNATIONAL INSTITUTE OF COMPUTER SCIENCE AND ADMINISTRATION
Select whole three letters "GSM" together and Group them > Fill gray
color.
Click and hold the mouse curser over Interactive Blend Tool to
get all other additional Tools > Choose Interactive Transparency Tool.
From the Property Bar > Click on "Transparency Type" drop down
arrow.
Choose "Uniform" type to reduce the opacity of the letters.
Now type rest of the text "Vodafone" > Fill it with navy blue color.
WWW.ICSA.US 95
INTERNATIONAL INSTITUTE OF COMPUTER SCIENCE AND ADMINISTRATION
Exercise No. 20
Use Pen Tool to draw a vertical line over the text "CITC" as shown
below.
Fill this line with white color > Apply "Hairline" size 2pt.
In the Menu Bar > Click on Arrange > Transformation > Rotation.
(Transformation Docker appears at the most right side of the window.)
In "Angle" field type value 10. (You can also use up and down arrow to get
your desire value.)
Click Apply To Duplicate Button in Transformation Docker.
Note: As many time you click this button, line will be duplicate and rotate with
the same distance sequence you specified in Angle field.
WWW.ICSA.US 96
INTERNATIONAL INSTITUTE OF COMPUTER SCIENCE AND ADMINISTRATION
Select all with Pick Tool and apply Group command (Ctrl+ G).
WWW.ICSA.US 97
INTERNATIONAL INSTITUTE OF COMPUTER SCIENCE AND ADMINISTRATION
Exercise No. 21
Draw this shape with the Pen Tool according to the instructions
given below.
WWW.ICSA.US 98
INTERNATIONAL INSTITUTE OF COMPUTER SCIENCE AND ADMINISTRATION
Select both the red outline object and rectangle with Pick Tool .
.
Delete the rectangle you used to get this intersected part.
Fill this object with navy blue color.
Use "Ctrl + Page down" to send it back to the red.
Observe in this figure below.
Draw a rectangle > Fill it with yellow and send it back to the red outline
object.
WWW.ICSA.US 99
INTERNATIONAL INSTITUTE OF COMPUTER SCIENCE AND ADMINISTRATION
Use "Free Hand Tool" to draw the curve lines > Fill black color with
4pt Hairline size.
Use Pick Tool to select all > From the Property Bar > Click on this
"Combine" button.
Use "Ctrl + Page Down key to send it back to this combined object.
(The gradient is viewed through the combined object.)
Use Freehand Tool to draw a vertical line for the post > Apply black
color with 4pt "Hairline" size.
WWW.ICSA.US 101
INTERNATIONAL INSTITUTE OF COMPUTER SCIENCE AND ADMINISTRATION
WWW.ICSA.US 102
INTERNATIONAL INSTITUTE OF COMPUTER SCIENCE AND ADMINISTRATION
WWW.ICSA.US 103
INTERNATIONAL INSTITUTE OF COMPUTER SCIENCE AND ADMINISTRATION
WWW.ICSA.US 104
INTERNATIONAL INSTITUTE OF COMPUTER SCIENCE AND ADMINISTRATION
WWW.ICSA.US 105
INTERNATIONAL INSTITUTE OF COMPUTER SCIENCE AND ADMINISTRATION
WWW.ICSA.US 106
INTERNATIONAL INSTITUTE OF COMPUTER SCIENCE AND ADMINISTRATION
WWW.ICSA.US 107
INTERNATIONAL INSTITUTE OF COMPUTER SCIENCE AND ADMINISTRATION
WWW.ICSA.US 108
INTERNATIONAL INSTITUTE OF COMPUTER SCIENCE AND ADMINISTRATION
WWW.ICSA.US 109
INTERNATIONAL INSTITUTE OF COMPUTER SCIENCE AND ADMINISTRATION
WWW.ICSA.US 110