Professional Documents
Culture Documents
UNIVIS™ HVI
Product Description
UNIVIS™ HVI 13 and 26 have been formulated to provide outstanding viscosity control in applications where
ambient temperature can vary widely, from very cold to warm. In addition to their wide operating range, these
fluids provide excellent wear protection, potent rust and corrosion protection, rapid foam and air release and
outstanding resistance to oxidation. These performance features help to provide the protection required to keep
hydraulic systems operating more efficiently over a wide operating temperature range.
Applications
Stationary and mobile hydraulic systems operating in a wide range of ambient temperatures and
https://www.mobil.com/English-CA/Industrial/pds/IOCAUnivis-HVI?p=1 08.06.2017
UNIVIS™ HVI Page 2 of 3
Typical Properties
UNIVIS HVI 13 26
Kinematic Viscosity
@40°C 13.5 25.8
@100°C 5.3 9.3
@-40°C 750 896
@-54°C 4400 -
Brookfield viscosity, ASTM D2983 1500 -
@-40°C
Viscosity Index, ASTM D2270 404 375
Pour Point, °C, ASTM D97 <-66 -60
Flash Point, °C, ASTM D92 102 103
The values shown above are representative of current production. Some are controlled by manufacturing and
performance specifications while others are not. All may vary within modest ranges.
Note: The products described on this data sheet are NOT controlled under Canadian WHMIS legislation.
All trademarks used herein are trademarks or registered trademarks of Exxon Mobil Corporation or one of its
subsidiaries unless indicated otherwise.
04-2016
Imperial Oil
Petroleum and Chemicals Division
Lubricants and Specialties
240 Fourth Ave SW
https://www.mobil.com/English-CA/Industrial/pds/IOCAUnivis-HVI?p=1 08.06.2017
UNIVIS™ HVI Page 3 of 3
C. P. 2480, Station M
Calgary AB T2P 3 M 9
1-800-268-3183
Typical Properties are typical of those obtained with normal production tolerance and do not constitute a
specification. Variations that do not affect product performance are to be expected during normal manufacture
and at different blending locations. The information contained herein is subject to change without notice. All
products may not be available locally. For more information, contact your local ExxonMobil contact or visit
www.exxonmobil.com
ExxonMobil is comprised of numerous affiliates and subsidiaries, many with names that include Esso, Mobil, or
ExxonMobil. Nothing in this document is intended to override or supersede the corporate separateness of local
entities. Responsibility for local action and accountability remains with the local ExxonMobil-affiliate entities.
https://www.mobil.com/English-CA/Industrial/pds/IOCAUnivis-HVI?p=1 08.06.2017