Outside diameter, W 4.750 ±1% Coupling length, NL 5.750 min. Thread crest diameter at face of coupling, C11 3.8791 Length face of coupling to gauge plane, M12 1.0345 Thread crest diameter, C12 3.8144 ±0.008 Diameter of coupling recess, Q 4.063 +0.031 / -0 Width of bearing face (Regular), b 0.1875 min. Bearing face diameter (Special bevel), Bf 4.375 max. Depth of coupling recess, q 0.375 +0.031 / -0 Taper per inch on diameter 0.0625 No. of thread per inch 8 +0.0052 / -0.0026 Hand tight standoff 0.250 ±0.125 Thread pitch 0.1250 Lead per inch 1.000 ±0.003 Thread height 0.07125 ±0.002 COUPLING PIN 8 ROUND TUBING THREAD DIMENSION SPECIAL BEVEL COUPLING TOLERANCES UNLESS SPECIFIED Description Material 1. Document reference, API Spesification Standard 5B 16th edition, and UNIT MM INCH 5CT 10th edition. .XXX --- ±0.010 2. All dimension are in inch. .XX ±0.25 ±0.030 Treatment Weight .X ±0.8 ±0.060 3. General tolerance unless other wise indicated. X. ±1.5 --- FRACTIONS --- ±1/16 Proj. 3th angle BREAK SHARP ADGES ±0.3 x45° ±0.010 x45° Paper Scale FILLET RADIUS 0.8 ±0.10 0.030 ±0.005 ANGLE ±0.5° ±0.5° A4 CONCENTRICITY SQUARENESS 0.15 DIA 0.01 IN 100 0.005 DIA 0.010 IN 10 Drawing number Rev. PARALLELISM 0.01 IN 100 0.010 IN 10 SURFACE FINISH 3.2 µm 250 µIN