Professional Documents
Culture Documents
Top Sub
Lock Pin
Insert Bushing
Middle Body Insert
Mandrel Fill Plug Seal
Non-Extrusion Ring
2 required
Fill Plug
Middle Body
Spring Guide
Mandrel
with Integral Piston
Valve Plug
Seat Seal
Balance Piston
Non-Extrusion Ring
2 required
Valve Plug Seat
Balance Piston
Balance Piston
Seal Protector Ring Balance Piston
2 required Seal
Bottom Sub
OUTSIDE DIAMETER 1-1/8 1-1/4 1-1/2 1-1/2 1-1/2 1-1/2 1-3/4
CONNECTIONS 5/8 15/16 15/16 15/16 15/16 15/16 3/4
PIN UP - BOX DOWN 11 THD 10 THD 10 THD 10 THD 10 THD 10 THD SR
LENGTH OF STROKE 6-3/4 9-1/4 8-3/4 8-3/4 20 12 10
COMPLETE ASSEMBLY Logan Part No. 700-000 700-925 700-875 700-002 700-003 700-004 700-1000
Bowen No. 35097 11740 11180 48383 51227 35518 79297
TOP SUB Logan Part No. AL1000 AL1001 AL1002 AL1002 AL1002 AL1002 AL1003
Bowen No. 35098 11741 10761 10761 10761 10761 12761
MIDDLE BODY Logan Part No. AL2000 AL2001 AL2002 AL2002 AL2003 AL2004 AL2005
Bowen No. 35099 11744 11182 11182 51228 35519 12765
MIDDLE BODY INSERT Logan Part No. AL3000 AL3001 AL3002 AL3002 AL3002 AL3002 AL3003
Bowen No. 35100 29486 28652 28652 28652 28652 79298
INSERT BUSHING Logan Part No. AL4000 AL4001 AL4002 AL4003 AL4002 AL4003 AL4006
Bowen No. 35101 33572 33571 35085 33571 35085 79299
MANDREL Logan Part No. AL5000 AL5001 AL5002 AL5003 AL5004 AL5005 AL5006
Bowen No. 35102 11742 11184 35086 51229 35520 79300
BOTTOM SUB Logan Part No. AL6000 AL6001 AL6002 AL6002 AL6002 AL6002 AL6003
Bowen No. 35103 11747 11181 11181 11181 11181 12767
Logan Oil Tools reserves the right to change or discontinue designs without notice.
ACCESSORIES
SERVICE KIT Logan Part No. 28001-013 28001-014 28001-015 28001-015 28001-015 28001-015 28001-016
Bowen No. 35105 11751 11178 11178 11178 11178 15997
MANDREL BODY Logan Part No. AG1000-10 AG1000-11 AG1000-15 AG1000-15 AG1000-15 AG1000-15 AG1000-17
SETTING TOOL Bowen No. 22709-10 22709-11 22709-15 22709-15 22709-15 22709-15 22709-17
BALANCE PISTON Logan Part No. AL13000-11 AL13001 AL13000-16 AL13000-16 AL13000-16 AL13000-16 AL13000-20
SETTING TOOL Bowen No. 22729-11 11753 22729-16 22729-16 22729-16 22729-16 22729-20
JAR LUBE – Logan Part No. 49842-A
1 GALLON Bowen No. 49842-A
5 GALLONS Logan Part No. 49842-B
Bowen No. 49842-B
20 GALLONS Logan Part No. 49842-C
Bowen No. 49842-C
55 GALLONS Logan Part No. 49842-D
Bowen No. 49842-D
Logan Oil Tools reserves the right to change or discontinue designs without notice.
Logan Oil Tools reserves the right to change or discontinue designs without notice.
Logan Oil Tools reserves the right to change or discontinue designs without notice.
ACCESSORIES
SERVICE KIT Logan Part No. 28001-017
Bowen No. 11554
MANDREL BODY Logan Part No. AG1000-24
SETTING TOOL Bowen No. 22709-21
BALANCE PISTON Logan Part No. AL13000-24
SETTING TOOL Bowen No. 22729-24
Logan Oil Tools reserves the right to change or discontinue designs without notice.
Overview
The simple and rugged Logan Tubular Wireline
Lock Pin
Jar is designed for use in combination with the
Logan Hydraulic Wireline Jar or by itself as a
separate tool. The combination of tools is par-
ticularly useful in permanent well completion
operations when the ability to jar both ways
must be positively assured.
Operation
The Logan Tubular Wireline Jar is actuated
either manually or by the use of a reel. The jar
is put into position by pulling or reeling. Sudden
Mandrel release or rapid unreeling causes the weight of
the jar and sinker bars to close the jar. A sharp
downward blow is delivered when the link body
bottoms against the bottom sub when it closes
on the downstroke. The full stroke will be either
20 or 30 inches.
Set Screw
Bottom Sub
Logan Oil Tools reserves the right to change or discontinue designs without notice.
Top Sub
Lock Pin
Insert
Mandrel Bushing Middle Body Insert
Non-Extrusion Ring
2 required
Fill Plug
with Fill Plug Seal
Mandrel Body
Mandrel
with Integral Piston
Middle Body
Spring Guide
Balance Piston
Non-Extrusion Ring
2 required Valve Plug
Seat Seal
Balance
Piston Valve Plug Seat
Balance Piston
Seal Protector Ring Balance Piston
2 required Seal
Bottom Sub
Overview Assembly
The Hydraulic Rod Jar provides a dependable The Hydraulic Rod Jar is made up in the string the jarring blow. The frequency of the blows
means for controlled jarring in sucker rod oper- just above the tools or equipment to be run. struck can be as rapid as the operator can pick
ations when electrical continuity or circulation The assembled tools are run into and out the up and slack off the running string.
to the tools or below the jar is not required. Its well on the sucker rod like any other rod tool.
simple hydraulic system permits the operator When ordering, please specify:
to control the intensity of the blow ranging from Operation (1) Complete assembly or part number
a light blow to one of terrific force. An upward strain is placed on the string by (2) O.D. of assembly
pulling upward, After setting the string, wait for (3) Size and type of connection
Construction the jar to strike a blow. After the jar has struck,
The Logan Hydraulic Rod Jar essentially con- slacking off the string will allow the jar to close.
sists of a sliding mandrel within a hydraulic Repeat the jarring by pulling another strain on
chamber. An integral piston on the lower end the string. The jarring force transmitted by the
of the mandrel rests in the middle body cylinder piston is proportional to the strain taken on
when the jar is in closed position. Each Hy- the string. To increase the intensity of the blow,
draulic Rod Jar is provided with a fishing neck take a greater strain on the string. A lighter
on the top sub and is supplied with viton seals. strain on the string will lessen the intensity of
OUTSIDE DIAMETER 1-1/2 1-3/4 2-1/8
CONNECTIONS 15/16 3/4 7/8
PIN UP - BOX DOWN 10 THD SR SR
LENGTH OF STROKE (INCHES) 9-3/16 10 11-5/16
COMPLETE ASSEMBLY Logan Part No. 703-001 703-003 703-005
Bowen No. 28591 79316 13570
TOP SUB Logan Part No. AL1002 AL1003 AL1004
Bowen No. 10761 12761 11543
MANDREL Logan Part No. BA2000 BA2001 BA2002
BODY INSERT Bowen No. 28594 79317 10723
MANDREL BODY Logan Part No. BA3000 BA3001 BA3002
Bowen No. 28593 12763 13572
MANDREL Logan Part No. BA4000 BA4001 BA4002
Bowen No. 28592 79318 13571
MIDDLE BODY Logan Part No. AL2002 AL2005 AL2006
Bowen No. 11182 12765 11537
BALANCE PISTON Logan Part No. AL7002 AL7003 AL7004
Bowen No. 11185 12766 11540
BOTTOM SUB Logan Part No. AL6002 AL6003 AL6004
Bowen No. 11181 12767 11536
VALVE PLUG Logan Part No. AL8000 AL8000 AL8000
Bowen No. 11189 11189 11189
VALVE PLUG SPRING Logan Part No. AL9000 AL9000 AL9000
Bowen No. 834 834 834
VALVE PLUG SEAT Logan Part No. AL10001 AL10001 AL10001
Bowen No. 11186 11186 11186
MANDREL Logan Part No. L365-15 L365-17 L365-21
NON-EXTRUSION RING Bowen No. 365-15 365-17 365-21
MANDREL SEAL Logan Part No. L375-15 L375-17 L375-21
PROTECTOR RING Bowen No. 375-15 375-17 375-21
BALANCE PISTON Logan Part No. L366-16 L366-20 L366-24
NON-EXTRUSION RING Bowen No. 366-16 366-20 366-24
BALANCE PISTON SEAL Logan Part No. L82-16 L82-20 L82-24
PROTECTOR RING Bowen No. 9382-16 9382-20 9382-24
Logan Oil Tools reserves the right to change or discontinue designs without notice.
ACCESSORIES
SERVICE KIT Logan Part No. 28001-015 28001-016 28001-017
Bowen No. 11178 15997 11554
MANDREL BODY Logan Part No. AG1000-15 AG1000-17 AG1000-21
SETTING TOOL Bowen No. 22709-15 22709-17 22709-21
BALANCE PISTON Logan Part No. AL13000-16 AL13000-20 AL13000-24
SETTING TOOL Bowen No. 22729-16 22729-20 22729-24
Logan Oil Tools reserves the right to change or discontinue designs without notice.
Overview
Spang Link Jars are used in any wireline oper-
ation where jarring action is desirable. They are
particularly suited to use as auxiliary equipment,
for shearing pins, actuating plungers, and other
similar uses. They are simple, lightweight, rug-
ged, and easy to maintain.
OUTSIDE DIAMETER 1 1-1/4 1-1/2 1-3/4 1-7/8
TOP CONNECTIONS 5/8 15/16 15/16 3/4 3/4
PIN BOTTOM - BOX 11 THD 10 THD 10 THD SR SR
LENGTH OF STROKE (INCHES) 24 24 24 – 30 24 – 30 24 – 30
COMPLETE ASSEMBLY Logan Part No. L18611 L186184 L18660 L18709 L21665
Logan Oil Tools reserves the right to change or discontinue designs without notice.
Lower Swivel
Overshot
Hang Off
Plate
Spear
OUTSIDE DIAMETER (INCHES) 1-3/8 1-11/16 2-1/8 Knuckle
COMPLETE ASSEMBLY Logan Part No. … … …
SWIVEL Logan Part No. LCM47-100 LCM98-100 LCM71-100
FLEXIBLE SINKER BAR Logan Part No. LCM45-100 LCM97-100 LCM42-100
ROPE SOCKET – UPPER Logan Part No. LCM49-100 LCM12-102 LCM72-100
ROPE SOCKET – LOWER Logan Part No. LCM49-100 LCM12-102 LCM72-100
KNUCKLE JOINT Logan Part No. LCM92-100 LCM93-102 LCM94-100
ACCESSORIES
T-BAR CLAMP ASSEMBLY Logan Part No. LCM01-104 LCM01-104 LCM01-104
SPEAR HEAD OVERSHOT Logan Part No. LCM48-100 LCM76-100 LCM65-100
290 • Cooper/Logan Cable Guided Fishing Assembly with Flexible Sinker Bar
Cooper/Logan Flexible Sinker Bar Assembly
Overview
The Flexible Sinker Bar Assembly is designed
for use during wireline stripping operations on
drilling rigs that utilize top drive systems. The
wire rope construction provides flexibility in the
wire rope sinker bar assembly and alleviates
the problems encountered when forcing a rigid
type sinker bar assembly around the top drive 1
housing. The slim-line rope socket provides
clearance for running inside the drill pipe and
is configured for large diameter wire rope to
provide increased sinker bar weight.
Notes:
1. 1.5" diameter wire rope – 6 x 41 IWRC
(alternate 6 x 37), right regular lay EIPS
(extra improved plow steel)
2. Maximum allowable working load: 25,000 lbs.
3. Proof load Wireline Sinker Bar Assembly
to 50,000 lbs. prior to service.
4. Estimated total weight: 124.8 lbs.
2
1-3/8" LCM45-100
1-11/16" LCM97-100
2-1/8" LCM42-100 24 Feet Ref.
Custom Lengths
Available Upon Request
2.125"
Overview
The T-Bar Wireline Clamping Tool is designed for wireline diameters up to 17/32" and wireline
breaking strength of 24,500 pounds. Improved design features such as anti-shear on the upper
clamp segment, increased support for wireline inserts, and increased T-bar body flange thickness,
enhance the tool’s safety during use in the field while maintaining the tool’s proven existing
capabilities.
L44906 Flo-Tubes
for Grease Injection Control Heads
REPLACEMENT PARTS FOR MEASURING LINE STUFFING BOXES
STUFFING BOX Logan Part No. LSBBT-6GR LSBBT-BLACK LSBBT-CROWN LSBBT-RED
PACKING
REPLACEMENT PARTS FOR WIRELINE BLOWOUT PREVENTERS
WIRELINE BOP Logan Part No. L42211 L44155 L44098
INNER SEALS
WIRELINE BOP Logan Part No. L42213 L44156 L44099
OUTER SEALS