Professional Documents
Culture Documents
it
The reasons for these periodical checks are simple: the valve control block
contains seal material and flows.
Whereas in a brake system, the correct functioning may be controlled from the
outside, in a valve system with an enclosed mechanism this is not possible.
It is therefore necessary to check the valve control block periodically, to verify the
state of the internal securities (the seals), made of rubber and which are subject to
wear and tear for natural reasons or for the influence of chemical agents.
GMV being a worldwide expert in valve systems, provides to all lift companies the
new check service of the entire hydraulic seal system (valve control block, cylinder
seals etc.) for GMV products.
A tested seal system of the hydraulic circuit is guaranteed for 2 years. For the
testing of the valve control block which complies with the appropriate elevator
system, GMV needs to know the type and the features of the valve control block
and the pump capacity.