You are on page 1of 4

Dice Rolling PDF

Dice Rolling PDF

Created by
Unbalanced Dice Games

Copyright  © 2017­2020 Unbalanced Dice Games
Explanation

The Dice Rolling PDF is a pdf file that has buttons and combo boxes that produce 
virtual dice rolls.   
The top bar has 4 combo boxes.  The first is the number of dice to roll.  The second 
is the type of dice to roll.  The "D" between the first two fields is a button that resets their 
values to 1.  The third is the number to add/subtract to the number produced by the first 
two numbers.  Addition/subtraction is determined by the radio buttons to the left of the 
combo box.  The fourth is the number of times that the number produced by the first three 
fields should be produced.  The "X" between fields three and four is a button that resets 
their values to 0 and 1.  The first two boxes allow numbers 1 to 1000 to be entered.  The 
third allows 0 to 1000.   The 4th allows 1 to 100.  Below these fields are 3 buttons each.  
The "­" button decrements the field, the "r" button resets the field to its default and the "+" 
button increments the field.  Under the third are 10 buttons, labelled "+" and 2­10.  These 
do the same thing as the "+" and "­" buttons but add/subtract the number in the button to 
the field.  The "+" button determines if the value is added or subtracted.  If pressed it 
changes to "­" and values are subtracted.  Pressing it again returns it to "+" and addition.
The box below that and to the left contains several buttons.  These set the top 4 
numbers to the dice type listed in the button.  There are 3 check boxes in the box.  The 
first “Set X To 1” if checked sets the first combo box to 1 when a dice button is pressed.  
The second “Set +/­ To 0” sets the third combo box to 0 when a dice button is pressed.  
The third “Roll D setters when pressed” indicates that the virtual dice will be rolled when a 
dice button is pressed.
The first button to the right of the box is the “Roll” button.  Press that when you 
want the virtual dice to be rolled.  To the right of that is a text that reads “Clear Output 
When Roll”.  If checked the output box will be cleared when a roll occurs.  Next to this is 
the "Nline" button.  If pressed it changes to "Space", press it again it returns back.  If its 
value is "Nline" numbers will be output with newlines.  If "Space" then they will be output 
with a space between each.  Below that is the “Clear Output” button that clears the output 
area when pressed.  The “1d6 vs 1d6 Initiative” button rolls an initiative for two sides 
using a d6.  The last button says “6 3d6”.  When pressed 6 3d6 rolls are outputted.  Good 
for ability score creation.
Beneath the "6 3d6" button is the "High 3, 4d6" button.  This rolls 4d6 6 times.  The 
3 high dice of each roll is added together.  The dice rolls and the sum of the high 3 are 
output.  Below this are the "Adv" and "Dis" buttons.  These stand for Advantage and 
Disadvantage.  The Adv button rolls 2 d20 rolls and outputs the higher of the two.  The 
Dis button does this but outputs the lower of the two.  Fields 3 and 4 are used for both of 
these buttons.

Remember To Finish All Editing In The Combo Boxes 
Or The Rolls Won't Be Right.

PDF Dice Don't Fail Me Now!
Select Dice Roll 
Parameters
1 D 1 + 0 X 1
- r + - r +
­ - r + - r +
Set Fields To  + 2 3 4 5
Dice Type Clear 
6 7 8 9 10 Output  ✔ Nline
1d2 1d3 1d50 On Roll
1d4 1d5 1d1000 Clear Output
1d6 1d7 Set +/­ 
1d8 1d9 to 0
Set X to 1 Roll 1d6 vs 1d6
1d10 1d14
1d12 1d16 Roll D 
setters  6 3d6
1d20 1d24 when  ✔
High 3, 4d6
1d100 1d30 pressed
Adv Dis
Dice rolls are placed here. Get Rollin!

You might also like