Professional Documents
Culture Documents
Programming Software
RSTune PID Loop Tuner Software . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6-5
RSLogix 500 Programming Software . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6-6
PLC-500 A.I. Series Programming Software . . . . . . . . . . . . . . . . . . . . . . . . . . 6-7
MicroLogix 1000 A.I. Series Programming Software . . . . . . . . . . . . . . . . . . . 6-8
PLC-5 A.I. Series Programming Software . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6-9
WINtelligent LOGIC 5 Software . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6-10
RSEmulate 5 and RSEmulate 500 Software . . . . . . . . . . . . . . . . . . . . . . . . . . 6-12
ApplicationBuilder Software . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6-13
6-1
Overview
Programming Support Tools Overview
Categories Products
Small, Dedicated Programming MicroLogix 1000 Hand-Held Programmer page 6-3
Terminals • Specifically designed for use with MicroLogix processors
• Multiple language support
• 2-line 16-character LCD display
• UL/CSA
SLC 500 Hand-Held Programmer page 6-4
• For SLC 500, 5/01, and 5/02 processors
• Resistant to liquid spills
Programming
Software
MS-DOS-based software PLC-500 A.I. Series Programming Software page 6-7
• Program SLC 500 processors and MicroLogix 1000 processors
MicroLogix 1000 A.I. Series Programming Software page 6-8
• Program MicroLogix 1000 processors
PLC-5 A.I. Series Programming Software page 6-9
• Program PLC-5 family of processors
RSTune PID Loop Tuner Software page 6-5
• Tune PID loops
Windows-based software RSLogix 500 Programming Software page 6-6
• Program SLC 500 and MicroLogix 1000 processors
WINtelligent LOGIC 5 Software page 6-10
• Program PLC-5 family of processors
RSEmulate 5 and RSEmulate 500
Software page 6-12
• Simulate several PLC-5 and SLC 500 processors
Process Configuration and Operation Software page 7-69
• Use PCO software with the ladder logic software packages listed above
to provide process control (PID) functions for PLC-5 processors
6-2
Programming Terminals (Dedicated)
MicroLogix 1000 Hand-Held Programmer
(Cat. No. 1761-HHP-B30)
Specifications
Dimensions
94.48 mm
(3.72 in.)
172.21 mm
Features (6.78 in.)
6-3
Programming Terminals (Dedicated)
SLC 500 Hand-held Terminal
(Cat. No. 1747-PT1)
Accessories
6-4
Programming Software
RSTune PID Loop Tuner Software
(Cat. No. 9323-1003D)
RSTunet PID Loop Tuner Software is a Microsoft • Analysis. RSTune software’s Analysis button will provide
Windows-based application designed to make the tuning of access to powerful diagnostic windows:
your critical PID loops fast, easy, and accurate. RSTune
- Modeling: Select one of four different model types.
software removes the delay and takes the guesswork out of
loop tuning by providing seamless connectivity to the desired - Simulation: Perform “What If” analysis while offline from
loop via DDE. Just locate the loop to be tuned and use the your process to see how your process response will
easy-to-use AutoTune Sequence. change with the suggested settings prior to
downloading a new setting to your loop controller.
6-5
Programming Software
RSLogix 500 Programming Software
(Cat. No. 9324-RL0300END, -RL0100END)
Compatibility
RSLogix Software is compatible with programs created in
RSLogix 500t Programming Software (cat. no. any Rockwell Software DOS-based programming package
9324-RL0300END) is a 32-bit Windows ladder logic making program maintenance across platforms convenient
programming package for the SLC 500 and the MicroLogix and easy.
1000 processors. Operating in the Microsoft Windows 95 • PLC-500 A.I. Series Programming Software
and Windows NT environment, RSLogix 500 software
incorporates state-of-the-art technology to help you maximize • Advanced Programming Software
performance, save time, and improve productivity. • MicroLogix 1000 A.I. Series Software
RSLogix 500 Starter Programming Software • MicroLogix Programming Software
(cat. no. 9324-RL0100END) is also available.
Ordering Information
Features
• Intuitive Windows Interface RSLogix Software RSLogix Starter
Local Language Versions Cat. Nos. Software Cat. Nos.
• Flexible Communication with RSLinx or Wintelligent LINX English 9324-RL0300END 9324-RL0100END
products French 9324-RL0300FRD 9324-RL0100FRD
- With RSLogix 500 Starter Programming Software you German 9324-RL0300DED 9324-RL0100DED
can communicate via A-B DF1 full-duplex protocol, or
Spanish 9324-RL0300ESD 9324-RL0100ESD
with DH-485 serial drivers or with RSEmulate 500
emulation driver. Italian 9324-RL0300ITD 9324-RL0100ITD
6-6
Programming Software
PLC-500 A.I. Series Programming Software
(Cat. Nos. 9323-S5300D, -S5500D, -S5250D, 9343-S5200D)
Features
• Full Offline & Online support for the SLC 5/03, 5/04 and
MicroLogix 1000 processors
• Modem Support
• Visual Branching
• WlNtelligent LlNX and RSEmulate 500 Support
• Configurable Custom Data Display Screen Size
• Optional Software (PLC-500 A.I. Series Processor
Emulation, PID Logistics for PLC-500 A.I. Series, RSLinx,
WINtelligent LINX, and RSEmulate 500 software)
System Requirements
• MS-DOS v5.0 or later, Windows v3.1, or Windows 95
PLC-500 A.l. Series is an easy-to-use, menu- and operating system.
function-key driven software package for programming both
the Allen-Bradley SLC 500 family of processors and • PLC-500 A.I. Series software can be used with:
MicroLogix 1000 processors. Use either an Allen-Bradley
- 386/SX
industrial terminal or an IBM compatible personal computer
(386 or greater). - NEC VERSA E Series Notebook
The software lets you directly program: SLC 5/04 processors - GATEWAY 2000 models 386DX/25, 386DX33,
over the DH+ network; SLC processors via any 1784-KT 486DX/33, 486DX2/50, and 486DX2/66 personal
card or using the 1784-PCMK card in a notebook computer; computers
or the Micro Controller (Bulletin 1761). All nodes (e.g.,
- Pentium PC
PLC-5, -5/250, PLC-3, PLC-2, and SLC 5/04 processors) on
the DH+ network are visible from the WHO active screen. The computer must have:
The software’s features help the beginner quickly become • 640K bytes of RAM (At least 4M bytes of extended
proficient in ladder logic development and documentation. memory is required.)
The advanced user will find powerful editing and diagnostic • 10M-byte hard-disk drive
tools to be great time savers during ladder program
development and troubleshooting.
Online and Offline modules offer complete programming, Ordering Information
documentation, and reporting, as well as upload/download
capabilities. The help system assists the user with unique Description Cat. No.
features of the software, as well as specific information on PLC-500 A.I. Series Offline Programming/Online 9323-S5300D
the processor’s instruction set. Monitoring Software
PLC-500 A.I. Series Processor Emulation Software 9343-S5200D
Rockwell Software also offers an A.l. Series Processor
Emulation Module. Processor Emulation provides a PLC-500 A.I. Series Complete System 9323-S5500D
convenient means for testing and debugging ladder logic PID Logistics for PLC-500 A.I. Series 9323-S5250D
offline on your computer. Using emulation you can SLC 500 DH-485 Smart Cable for 1784-KT 9399-S5103
troubleshoot your program one scan at a time and add SLC 500 DH-485 Smart Cable for 1784-PCMK 9399-S5104
breakpoints to trap unexpected program conditions. See
page 6-12 for more information about A.l. Series processor
emulation.
For Microsoft Windows users, PLC-500 A.I. Series Software,
v8.0, operates in a DOS window within Microsoft Windows so
that you can run it in a multisession environment with other
software packages, including 6200 software.
6-7
Programming Software
MicroLogix 1000 A.I. Series Programming Software
(Cat. No. 9323-MX300EN)
Features
• Modem support (“A.l.Term” is included)
• Visual Branching
• Sequencer Display Screen and Reports
• High-Resolution screen-display modes
• Short addressing
• Binary address display modes of “/Bit” or “Word/Bit”
• I/O bit address display modes of “Slot/Bit” or
”Slot.Word/Bit”
• Independent Database editor
• Symbolic Programming and Automatic addressing
• Block/Cut/Copy/Paste with address offset
Rockwell Software MicroLogix 1000 A.l. Series Offline • Command String Parser
Programming/Online Monitoring Software is an easy-to-use,
menu- and function-key driven software package for • Keyboard Macros
programming the Allen-Bradley MicroLogix 1000 controllers
• Search and Replace capabilities
(page 1-3). The program has been simplified to support only
the Micro controllers while maintaining the feel of A.l. Ladder • DOS file utilities
Logisticst software. Rockwell Software features help the
beginner quickly become proficient in ladder logic
development and documentation. System Requirements
The Micro package offers complete offline programming, • MS-DOS v5.0 or later, Windows v3.1, or Windows 95
online monitoring, documentation, and extensive reporting operating system.
features as well as upload/download capabilities. Find
Baud/Parity functionality is included to assist the user in • MicroLogix 1000 A.I. Series software can be used with:
quickly establishing communication with the MicroLogix - 386/SX
processor. The context-sensitive help assists the user with
unique software features, as well as specific information on - NEC VERSA E Series Notebook
the Micro instruction set.
- GATEWAY 2000 models 386DX/25, 386DX33,
486DX/33, 486DX2/50, and 486DX2/66 personal
computers
- Pentium PC
The computer must have:
• 640K bytes of RAM (At least 4M bytes of extended
memory is required.)
• 10M-byte hard-disk drive
6-8
Programming Software
PLC-5 A.I. Series Programming Software
(Cat. Nos. 9321-L5160D, -L5250D, 9323-L5300D, 9325-L5140D, 9341-L5200D)
6-9
Programming Software
WINtelligent LOGIC 5 Software
(Cat. Nos. 9323-WL5300D, 9325-WL5140D, -WL5500D)
Rockwell Software WINtelligent LOGIC 5 Software is a • Mouse-based addressing — as you place an instruction,
Microsoft Windows-based (v3.1) ladder logic development the software prompts you with a list of the available data
and maintenance software for A-B PLC-5 processors. You table files, allowing you to select the address quickly
can program using a mouse or other pointing device as your
• Symbolic addressing — lets you substitute any
primary interface. The LOGIC 5 program and display
15-character word or phrase for addresses, simplifying the
settings are completely configurable, so that you can
process of placing addresses in instructions and helping
customize the look and function of your programming tools.
you troubleshoot your logic
WINtelligent LOGIC 5 uses the same ladder logic and
• Graphical I/O configuration — gives you a visual display
database formats as Rockwell Software PLC-5 A.I. Series
of your I/O racks with a simple spreadsheet form for
Ladder Logistics software (page 6-9). No conversions are
defining and configuring your I/O
necessary when using both WINtelligent LOGIC 5 and PLC-5
A.I. Series software. Automatic addressing lets you instantly • Advanced diagnostics — a troubleshooting feature that
address your logic as you create it. When you place an uses page titles to segment your ladder logic so that you
instruction, WINtelligent LOGIC 5 automatically places an can use advanced diagnostics to quickly locate the
address into the instruction. outputs in a particular section of your ladder logic
WINtelligent LOGIC 5 supports the basic Windows editing • Communication — WINtelligent LOGIC 5 software
techniques, such as cut, copy, and paste. accesses WINtelligent LINX products directly giving you a
quick interface into online communication and allowing
you to configure your communication hardware once for
Features all Rockwell Software WINtelligent Series applications
Power programming features include: • Program documentation — you can have WINtelligent
LOGIC 5 software prompt you for instruction descriptions
• Palettes for selecting instructions and addresses from a
as you edit ladder logic or when you’re finished editing
single, central location
• Search and replace functions — let you easily locate and
• Graphic I/O configuration utility
replace addresses and description text. The powerful
• Automatic addressing for instructions searching features allow easy troubleshooting, and the
replace feature helps you when reconfiguring I/O and
• Automatic placement of block-transfer instructions for when using a ladder program for a different project
block-transfer modules
• Search and cross-reference features — let you search for
• Multiple data table displays the instances of a particular address, instruction,
• Separate database editor in spreadsheet form instruction description, symbol, rung comment, or page
title
• Toolbars and icons that let you quickly select commonly
used features • Custom screen displays — let you display up to 220
addresses (binary, integer, hexadecimal, octal, BCD,
WINtelligent LOGIC 5 software makes editing ladder logic as floating point, ASCII, and string) from anywhere in the
simple as pointing and clicking your mouse because it data table and display them on a single screen
includes:
• Mouse-based editing — lets you access virtually all
functions through icons. Cut, copy, and paste instructions
and rungs of ladder logic from one program to another as
easily as copying a sentence from one word processor
document to another
6-10
Programming Software
WINtelligent LOGIC 5 Software
(Cat. Nos. 9323-WL5300D, 9325-WL5140D, -WL5500D)
System Requirements
• Microsoft Windows, v3.1, or Windows 95 operating
system.
Ordering Information
6-11
Programming Software
RSEmulate 5 and RSEmulate 500 Software
(Cat. Nos. 9310-WE5200D, -WE0200D, 9324-RL0350END, 9325-WL5500D)
6-12
Programming Software
ApplicationBuilder Software
(Cat. No. 6556-SAB)
Features
• Windows-based software simplifies ladder logic
programming by assembling pre-written software modules
into a single program
• Enables software options to be quickly and efficiently
programmed through the use of Object Linking and
Embedding (OLE)
• Helps bring the benefits of object-oriented programming to
the ladder logic developer
• Makes software standardization easier to achieve
• Locks the SLC processor against direct edits to ladder
logic
• Merges your own auxiliary ladder logic with A-B supplied
Clutch/Brake software
ApplicationBuilder Software is Windows-based software • When used with A-B Clutch/Brake software (cat. no.
that lets you configure SLC systems by customizing, 6556-SCB), you can choose desired options, such as
creating, and merging Software Application Modules (SAMs) resolvers or cam switches, armed continuous or
using existing ladder files. SAMs are building blocks used to stroke-and-a-half method to start continuous stroking
create a complete control system. You can quickly and
efficiently merge Allen-Bradley SAMs, such as Clutch/Brake • You can use ApplicationBuilder software as a stand-alone
software (cat. no. 6556-SCB), with standard software software package for cutting and pasting SLC ladder logic
modules developed by SIs, OEMs, and end users. programs
ApplicationBuilder software merges, checks, downloads,
locks, verifies a clutch brake program, and creates an
System Requirements
archive file. Once programmed, changes to the logic are
only possible through erasing and reburning the PROM. • i386SX 20 MHz microprocessor with Windows operating
system, v3.1 or later, installed
An Allen-Bradley SAM Contains: • SLC 5/03 or 5/04 processor
• ApplicationBuilder software requires the use of APS
Raw segments of ladder logic needed to create the final ladder
logic code Software, v5.0 or later
For more information on SAMs, which are available from
Application Programs, see page 10-8.
Program description:
6-13
Diagnostics and Maintenance Software
ControlGuardian and ControlGuardian Archiver5 Software
(Cat. Nos. 9330-CC, -A5)
System Requirements
Features
• Centralized project file storage
• Network diagnostics and status
• Share archive files with programming software
• Archive four generations of file backups
• Protect against unauthorized access
• Multiple communication interfaces
- Data Highway
- Data Highway Plus
- Ethernet
- Remote I/O (passthrough)
- Serial
6-14
Diagnostics and Maintenance Software
PathFinder Software for PLC-5/15, -5/25, -5/30, -5/40 and -5/60 Processors
(Cat. Nos. ABT-SWxxx, ABTD-1.0)
System Requirements
• Successful completion of an authorized A-B PLC-5
training course
• An IBM-compatible personal computer with:
- an 80286 or higher microprocessor (80386SX or higher
recommended)
- 640K of conventional memory
- one floppy disk drive capable of reading 3.5” or 5.25”
high-density floppy disks
- a hard-disk drive with 10M bytes of space available
- MS-DOS operating system, v3.0 or later
- a VGA monitor, color capability recommended
6-15
Product Compliance Information
Programming Support Tool Products
UL/CSA and CE
The following products (in addition to the ones we’ve already identified in this section) have UL/CSA approval and CE
certification.
6-16