Professional Documents
Culture Documents
Disclaimer: This documentation is not intended as a substitute for and is not to be used for determining suitability or reliability of these products for specific user applications
Main
Range Spacial
Product name Spacial SM
Product or component type Compact enclosure
Application Multi-purpose
Installation accessory type Floor-standing
Device composition 1 body
1 cable gland plate
1 locking system with handle: door
4 mounting plate bracket
1 door
Removable parts Door by screws hinge
Mounting plate bracket by screws
Enclosure nominal height 1800 mm
Enclosure nominal width 800 mm
Enclosure nominal depth 400 mm
Complementary
Number of doors Front: 1 door(s)
Door opening side Reversible (120 °)
Door type Plain
Lock type 4 points lock, handle with 5 mm double bar insert
Body type Single piece body with welded rear panel
Front part forming a rigid frame with welded corners
Mounting plate description Without mounting plate
Type of gland plate Standard
Cable entry 1 entry
Material Body: sheet steel
Door: sheet steel
Hinge: zamak
Surface finish Epoxy-polyester powder
Dec 14, 2019
1
Colour Enclosure: grey (RAL 7035)
Handle: black (RAL 9005)
Accessibility for operation Front
Environment
Standards IEC 62208
Product certifications BV
DNV
UL
IP degree of protection IP55 conforming to IEC 60529
IK degree of protection IK10 conforming to IEC 62262
Offer Sustainability
Sustainable offer status Green Premium product
REACh Regulation REACh Declaration
EU RoHS Directive Pro-active compliance (Product out of EU RoHS legal scope)
EU RoHS Declaration
Mercury free Yes
RoHS exemption information Yes
China RoHS Regulation China RoHS declaration
Product out of China RoHS scope. Substance declaration for your information
Environmental Disclosure Product Environmental Profile
Circularity Profile No need of specific recycling operations
Contractual warranty
Warranty 18 months
2
Data sheet 6AV2123-2GB03-0AX0
SIMATIC HMI, KTP700 Basic, Basic Panel, Key/touch operation, 7"
TFT display, 65536 colors, PROFINET interface, configurable from
WinCC Basic V13/ STEP 7 Basic V13, contains open-source
software, which is provided free of charge see enclosed CD
General information
Product type designation KTP700 Basic color PN
Display
Design of display TFT widescreen display, LED backlighting
Screen diagonal 7 in
Display width 154.1 mm
Display height 85.9 mm
Number of colors 65 536
Resolution (pixels)
● Horizontal image resolution 800 Pixel
● Vertical image resolution 480 Pixel
Backlighting
● MTBF backlighting (at 25 °C) 20 000 h
● Backlight dimmable Yes
Control elements
Keyboard fonts
● Function keys
— Number of function keys 8
Installation type/mounting
Mounting position vertical
Mounting in portrait format possible Yes
Mounting in landscape format possible Yes
maximum permissible angle of inclination without 35°
external ventilation
Supply voltage
Type of supply voltage DC
Rated value (DC) 24 V
permissible range, lower limit (DC) 19.2 V
permissible range, upper limit (DC) 28.8 V
Input current
Current consumption (rated value) 230 mA
Starting current inrush I²t 0.2 A²·s
Power
Active power input, typ. 5.5 W
Processor
Processor type ARM
Memory
Flash Yes
RAM Yes
Memory available for user data 10 Mbyte
Type of output
Acoustics
● Buzzer Yes
● Speaker No
Time of day
Clock
● Hardware clock (real-time) Yes
● Software clock Yes
● retentive Yes; Back-up duration typically 6 weeks
● synchronizable Yes
Protocols
PROFINET Yes
Supports protocol for PROFINET IO No
IRT No
PROFIBUS No
MPI No
Protocols (Ethernet)
● TCP/IP Yes
● DHCP Yes
● SNMP Yes
● DCP Yes
● LLDP Yes
WEB characteristics
● HTTP No
● HTML No
Redundancy mode
● MRP No
Further protocols
● CAN No
● EtherNet/IP Yes
● MODBUS Yes; Modicon (MODBUS TCP/IP)
Interrupts/diagnostics/status information
Diagnostic messages
● Diagnostic information readable No
EMC
Emission of radio interference acc. to EN 55 011
● Limit class A, for use in industrial areas Yes
● Limit class B, for use in residential areas No
Ambient conditions
Ambient temperature during operation
● Operation (vertical installation)
— For vertical installation, min. 0 °C
— For vertical installation, max. 50 °C
● Operation (max. tilt angle)
— At maximum tilt angle, min. 0 °C
— At maximum tilt angle, min. 40 °C
● Operation (vertical installation, portrait format)
— For vertical installation, min. 0 °C
— For vertical installation, max. 40 °C
● Operation (max. tilt angle, portrait format)
— At maximum tilt angle, min. 0 °C
— At maximum tilt angle, min. 35 °C
Operating systems
proprietary Yes
pre-installed operating system
● Windows CE No
Configuration
Message indicator Yes
Alarm system (incl. buffer and acknowledgment) Yes
Process value display (output) Yes
Process value default (input) possible Yes
Recipe management Yes
Configuration software
● STEP 7 Basic (TIA Portal) Yes; via integrated WinCC Basic (TIA Portal)
● STEP 7 Professional (TIA Portal) Yes; via integrated WinCC Basic (TIA Portal)
● WinCC flexible Compact No
● WinCC flexible Standard No
● WinCC flexible Advanced No
● WinCC Basic (TIA Portal) Yes
● WinCC Comfort (TIA Portal) Yes
● WinCC Advanced (TIA Portal) Yes
● WinCC Professional (TIA Portal) Yes
Languages
Online languages
● Number of online/runtime languages 10
Project languages
● Languages per project 32
Peripherals/Options
Printer No
SIMATIC HMI MM memory card: Multi Media Card No
SIMATIC HMI SD memory card: Secure Digital No
memory card
SIMATIC HMI CF memory card Compact Flash Card No
USB memory Yes
SIMATIC IPC USB Flashdrive (USB stick) Yes
SIMATIC HMI USB stick Yes
Mechanics/material
Enclosure material (front)
● Plastic Yes
● Aluminum No
● Stainless steel No
Dimensions
Width of the housing front 214 mm
Height of housing front 158 mm
Mounting cutout, width 197 mm
Mounting cutout, height 141 mm
Overall depth 39 mm
Weights
Weight without packaging 780 g
Weight incl. packaging 990 g
Memory
Type of memory Flash-EPROM
Flash Yes
Memory size 4 Mbyte
Number of write/delete operations, min. 500 000
Data retention (after final programming action), min. 10 y; If the delete/write processes < 50 000 (1 a if the delete/write
processes > 450 000)
Dimensions
Width 24 mm
Height 32 mm
Depth 2.1 mm
Weights
Weight, approx. 3 g
Dimensions
Width 160 mm
Height 155 mm
Depth 16 mm
Weights
Weight, approx. 310 g
General information
Product type designation CPU 1513R-1 PN
HW functional status FS01
Firmware version V2.6
Engineering with
● STEP 7 TIA Portal configurable/integrated as of STEP 7 V15.1 or higher
version
Display
Screen diagonal [cm] 3.45 cm
Control elements
Number of keys 6
Mode selector switch 1
Supply voltage
Type of supply voltage 24 V DC
permissible range, lower limit (DC) 19.2 V
permissible range, upper limit (DC) 28.8 V
Reverse polarity protection Yes
Mains buffering
Input current
Current consumption (rated value) 0.7 A
Inrush current, max. 1.9 A; Rated value
I²t 0.02 A²·s
Power loss
Power loss, typ. 5.7 W
Memory
Number of slots for SIMATIC memory card 1
SIMATIC memory card required Yes
Work memory
● integrated (for program) 300 kbyte
● integrated (for data) 1.5 Mbyte
Load memory
● Plug-in (SIMATIC Memory Card), max. 32 Gbyte
Backup
● maintenance-free Yes
CPU-blocks
Number of elements (total) 2 000; Blocks (OB, FB, FC, DB) and UDTs
DB
● Number range Number range: 1 to 59 999
● Size, max. 1.5 Mbyte; For non-optimized block accesses, the max. size of the
DB is 64 KB
FB
● Number range 0 ... 65 535
● Size, max. 300 kbyte
FC
● Number range 0 ... 65 535
● Size, max. 300 kbyte
OB
● Size, max. 300 kbyte
● Number of free cycle OBs 100
● Number of time alarm OBs 20
● Number of delay alarm OBs 20
● Number of cyclic interrupt OBs 20
Address area
Number of IO modules 2 048
I/O address area
● Inputs 32 kbyte
● Outputs 32 kbyte
per integrated IO subsystem
— Inputs (volume) 8 kbyte
— Outputs (volume) 8 kbyte
Hardware configuration
Number of IO Controllers
● integrated 1
Time of day
Clock
● Backup time 6 wk; At 40 °C ambient temperature, typically
● Deviation per day, max. 10 s; Typ.: 2 s
Operating hours counter
● Number 16
Clock synchronization
● supported Yes
● in AS, master No
● in AS, slave No
Interfaces
Number of PROFINET interfaces 1
1. Interface
Interface types
● Number of ports 2
● integrated switch Yes
● RJ 45 (Ethernet) Yes; X1
Protocols
● IP protocol Yes; IPv4
● PROFINET IO Controller Yes
● PROFINET IO Device No
● SIMATIC communication Yes; Only Server
● Open IE communication Yes
● Web server No
● Media redundancy Yes; MRP Automanager according to IEC 62439-2 Edition 2.0
PROFINET IO Controller
Services
— PG/OP communication Yes
— S7 routing No
— Isochronous mode No
— Open IE communication Yes
— IRT No
— MRP Yes; Only Manager Auto, max. 50 nodes; only 16 are
recommended, however
— MRPD No
Interface types
RJ 45 (Ethernet)
● 100 Mbps Yes
● Autonegotiation Yes
● Autocrossing Yes
● Industrial Ethernet status LED Yes
Protocols
Number of connections
● Number of connections, max. 88
● Number of connections reserved for 10
ES/HMI/web
Redundancy mode
● MRP Yes; Manager Auto is permanently set in TIA. Max. 50 nodes are
possible, 16 are recommended
● MRPD No
SIMATIC communication
● S7 communication, as server Yes
● S7 communication, as client No
Open IE communication
● TCP/IP Yes
— Data length, max. 64 kbyte
— several passive connections per port, Yes
supported
● ISO-on-TCP (RFC1006) Yes
— Data length, max. 64 kbyte
● UDP Yes
— Data length, max. 2 kbyte; 1 472 bytes for UDP broadcast
— UDP multicast Yes; Max. 5 multicast circuits
● DHCP No
● SNMP Yes
● DCP Yes
● LLDP Yes
Web server
● HTTP No
● HTTPS No
OPC UA
● OPC UA client No
S7 message functions
Program alarms No
Interrupts/diagnostics/status information
Diagnostics indication LED
● RUN/STOP LED Yes
● ERROR LED Yes
● MAINT LED Yes
Ambient conditions
Ambient temperature during operation
● horizontal installation, min. 0 °C
● horizontal installation, max. 60 °C; Display: 50 °C, at an operating temperature of typically 50
°C, the display is switched off
● vertical installation, min. 0 °C
● vertical installation, max. 40 °C; Display: 40 °C, at an operating temperature of typically 40
°C, the display is switched off
Ambient temperature during storage/transportation
● min. -40 °C
● max. 70 °C
Configuration
Programming
Programming language
— LAD Yes
— FBD Yes
— STL Yes
— SCL Yes
— GRAPH No
Know-how protection
● User program protection/password protection Yes
● Copy protection No
● Block protection Yes
Access protection
● Password for display Yes
● Protection level: Write protection Yes
● Protection level: Read/write protection Yes
● Protection level: Complete protection Yes
Dimensions
Width 35 mm
Height 147 mm
Depth 129 mm
Weights
Weight, approx. 430 g
General information
Product type designation BU type A0
HW functional status From FS03
Supply voltage
Rated value (DC) 24 V
external protection for power supply lines Yes; 24 V DC/10 A miniature circuit breaker with type B or C
tripping characteristic
Mains filter
● integrated Yes
Hardware configuration
Formation of potential groups
● New potential group Yes
● Potential group continued from the left No
Isolation
Ambient conditions
Ambient temperature during operation
● horizontal installation, min. -30 °C
● horizontal installation, max. 60 °C
● vertical installation, min. -30 °C
● vertical installation, max. 50 °C
Altitude during operation relating to sea level
● Installation altitude above sea level, max. 5 000 m; Restrictions for installation altitudes > 2 000 m, see
manual
Accessories
Color coding labels
● for process terminals CC00 to CC09
● for AUX terminals does not exist
● for add-on terminals does not exist
Connection method
Terminals
● Terminal type Push-in terminal
● Conductor cross-section, min. 0.14 mm²; AWG 26
● Conductor cross-section, max. 2.5 mm²; AWG 14
● Number of process terminals to I/O module 16; Pro slot
● Number of terminals to AUX bus 0
● Number of add-on terminals 0
● Number of terminals with connection to P1 and 2; Pro slot
P2 bus
Dimensions
Width 30 mm
Height 117 mm
Depth 35 mm
Weights
Weight, approx. 80 g
General information
Product type designation BU type A0
HW functional status From FS03
Supply voltage
Rated value (DC) 24 V
external protection for power supply lines Yes; 24 V DC/10 A miniature circuit breaker with type B or C
tripping characteristic
Mains filter
● integrated No
Hardware configuration
Formation of potential groups
● New potential group No
● Potential group continued from the left Yes
Isolation
Ambient conditions
Ambient temperature during operation
● horizontal installation, min. -30 °C
● horizontal installation, max. 60 °C
● vertical installation, min. -30 °C
● vertical installation, max. 50 °C
Altitude during operation relating to sea level
● Installation altitude above sea level, max. 5 000 m; Restrictions for installation altitudes > 2 000 m, see
manual
Accessories
Color coding labels
● for process terminals CC00 to CC09
● for AUX terminals does not exist
● for add-on terminals does not exist
Connection method
Terminals
● Terminal type Push-in terminal
● Conductor cross-section, min. 0.14 mm²; AWG 26
● Conductor cross-section, max. 2.5 mm²; AWG 14
● Number of process terminals to I/O module 16; Pro slot
● Number of terminals to AUX bus 0
● Number of add-on terminals 0
● Number of terminals with connection to P1 and 2; Pro slot
P2 bus
Dimensions
Width 30 mm
Height 117 mm
Depth 35 mm
Weights
Weight, approx. 80 g
General information
Product type designation BA 2x RJ45
Interfaces
Number of PROFINET interfaces 1
Supports protocol for PROFINET IO
● Number of RJ45 ports 2
● Number of SCRJ ports 0
● Number of LC ports 0
Cable length
— Cu conductors 100 m
Ambient conditions
Ambient temperature during operation
● horizontal installation, min. -30 °C
● horizontal installation, max. 60 °C
● vertical installation, min. -30 °C
● vertical installation, max. 50 °C
Altitude during operation relating to sea level
● Installation altitude above sea level, max. 2 000 m; On request: Installation altitudes greater than 2 000 m
Weights
Weight, approx. 46 g
General information
Product type designation IM 155-6 PN/2 HF with server module
HW functional status From FS02
Firmware version V4.2
● FW update possible Yes
Number of MtM communication 16
relationships/connections, max.
Product function
● I&M data Yes; I&M0 to I&M3
● Module swapping during operation (hot Yes; Multi-hot swapping
swapping)
● Isochronous mode Yes
● Tool changer Yes; Docking station and docking unit
● Local coupling, IO data No
● Local coupling, data records No
Engineering with
● STEP 7 TIA Portal configurable/integrated as of STEP 7 V15.1 or higher
version
● STEP 7 configurable/integrated as of version Configurable via GSD file
Configuration control
via dataset Yes
Supply voltage
Rated value (DC) 24 V
permissible range, lower limit (DC) 19.2 V
permissible range, upper limit (DC) 28.8 V
Reverse polarity protection Yes
Mains buffering
● Mains/voltage failure stored energy time 10 ms
Input current
Current consumption, max. 700 mA
Inrush current, max. 4.5 A
I²t 0.25 A²·s
Power loss
Power loss, typ. 2.4 W
Address area
Address space per module
● Address space per module, max. 288 byte; For input and output data respectively
Address space per station
● Address space per station, max. 1 440 byte; Dependent on configuration
Hardware configuration
Rack
● Modules per rack, max. 64; + 16 ET 200AL modules
Submodules
● Number of submodules per station, max. 256
Time stamping
Accuracy 10 ms
Interfaces
Number of PROFINET interfaces 1; 2 ports (switch)
1. Interface
Interface types
● Number of ports 2; via BusAdapter
● integrated switch Yes
● BusAdapter (PROFINET) Yes; Compatible BusAdapter: BA 2x RJ45, BA 2x FC, BA 2x
SCRJ, BA SCRJ / RJ45, BA SCRJ / FC, BA 2x LC, BA LC / RJ45,
BA LC / FC
Protocols
● PROFINET IO Device Yes
Interface types
RJ 45 (Ethernet)
● Transmission procedure PROFINET with 100 Mbit/s full duplex (100BASE-TX)
● 10 Mbps No
● 100 Mbps Yes; PROFINET with 100 Mbit/s full duplex (100BASE-TX)
● Autonegotiation Yes
● Autocrossing Yes
Protocols
PROFINET IO Device
Services
— Isochronous mode Yes; Bus cycle time: min. 250 µs
— Open IE communication Yes
— IRT Yes; 250 μs, 500 μs, 1 ms, 2 ms, 4 ms additionally with IRT with
high performance: 250 µs to 4 ms in 125 µs frame
— PROFIenergy Yes
— Prioritized startup Yes
— Shared device Yes
— Number of IO Controllers with shared 4
device, max.
Redundancy mode
● MRP Yes
● MRPD No
● PROFINET system redundancy (S2) Yes; NAP S2
● Redundant PROFINET configuration (R1) No
● H-Sync forwarding Yes
Open IE communication
● TCP/IP Yes
● SNMP Yes
● LLDP Yes
Isochronous mode
Isochronous operation (application synchronized up Yes
to terminal)
Equidistance Yes
shortest clock pulse 250 µs
max. cycle 4 ms
Bus cycle time (TDP), min. 250 µs
Jitter, max. 1 µs
Interrupts/diagnostics/status information
Status indicator Yes
Potential separation
between backplane bus and electronics No
between PROFINET and all other circuits Yes
between supply and all other circuits No
Isolation
Isolation tested with 707 V DC (type test)
Ambient conditions
Ambient temperature during operation
● horizontal installation, min. -30 °C; No condensation
● horizontal installation, max. 60 °C
● vertical installation, min. -30 °C; No condensation
● vertical installation, max. 50 °C
Altitude during operation relating to sea level
● Installation altitude above sea level, max. 5 000 m; Restrictions for installation altitudes > 2 000 m, see
manual
Connection method
ET-Connection
● via BU/BA Send Yes; + 16 ET 200AL modules
Mechanics/material
Strain relief Yes; Optional
Dimensions
Width 50 mm
Height 117 mm
Depth 74 mm
Weights
Weight, approx. 120 g; without BusAdapter
General information
Product type designation DQ 16x24VDC/0.5A ST, PU 1
HW functional status From FS03
Firmware version V0.0
● FW update possible No
usable BaseUnits BU type A0
Color code for module-specific color identification CC00
plate
Product function
● I&M data Yes; I&M0 to I&M3
Engineering with
● STEP 7 TIA Portal configurable/integrated as of V14
version
● STEP 7 configurable/integrated as of version V5.5 SP3
● PCS 7 configurable/integrated as of version V8.1 SP1
● PROFIBUS as of GSD version/GSD revision One GSD file each, Revision 3 and 5 and higher
● PROFINET as of GSD version/GSD revision GSDML V2.3
Operating mode
● DQ Yes
Supply voltage
Rated value (DC) 24 V
permissible range, lower limit (DC) 19.2 V
permissible range, upper limit (DC) 28.8 V
Reverse polarity protection Yes
Input current
Current consumption, max. 60 mA; without load
Output voltage
Rated value (DC) 24 V
Power loss
Power loss, typ. 1 W
Address area
Address space per module
● Address space per module, max. 2 byte; + 2 bytes for QI information
Hardware configuration
Automatic encoding Yes
● Mechanical coding element Yes
Selection of BaseUnit for connection variants
● 1-wire connection BU type A0
● 2-wire connection BU type A0 + Potential isolation module
● 3-wire connection BU type A0 + Potential isolation module
● 4-wire connection BU type A0 + Potential isolation module
Digital outputs
Type of digital output Source output (PNP, current-sourcing)
Number of digital outputs 16
Current-sinking No
Current-sourcing Yes
Digital outputs, parameterizable Yes
Short-circuit protection Yes
● Response threshold, typ. 1 A; 0.7 to 1.3 A
Open-circuit detection Yes
Limitation of inductive shutdown voltage to Typ. L+ (-50 V)
Controlling a digital input Yes
Switching capacity of the outputs
● with resistive load, max. 0.5 A
● on lamp load, max. 5 W
Isochronous mode
Isochronous operation (application synchronized up No
to terminal)
Interrupts/diagnostics/status information
Diagnostics function Yes
Substitute values connectable Yes
Alarms
● Diagnostic alarm Yes
Diagnostic messages
Potential separation
Potential separation channels
● between the channels No
● between the channels and backplane bus Yes
Isolation
Isolation tested with 707 V DC (type test)
Ambient conditions
Ambient temperature during operation
● horizontal installation, min. -30 °C
● horizontal installation, max. 60 °C
● vertical installation, min. -30 °C
● vertical installation, max. 50 °C
Altitude during operation relating to sea level
● Installation altitude above sea level, max. 2 000 m; On request: Installation altitudes greater than 2 000 m
Dimensions
Width 15 mm
Height 73 mm
Depth 58 mm
Weights
Weight, approx. 30 g
General information
Product type designation DI 16x24VDC ST
HW functional status From FS02
Firmware version V0.0
● FW update possible No
usable BaseUnits BU type A0
Color code for module-specific color identification CC00
plate
Product function
● I&M data Yes; I&M0 to I&M3
Engineering with
● STEP 7 TIA Portal configurable/integrated as of V14
version
● STEP 7 configurable/integrated as of version V5.5 SP3
● PCS 7 configurable/integrated as of version V8.1 SP1
● PROFIBUS as of GSD version/GSD revision One GSD file each, Revision 3 and 5 and higher
● PROFINET as of GSD version/GSD revision GSDML V2.3
Operating mode
● DI Yes
Supply voltage
Rated value (DC) 24 V
permissible range, lower limit (DC) 19.2 V
permissible range, upper limit (DC) 28.8 V
Reverse polarity protection Yes
Input current
Current consumption, max. 90 mA
Encoder supply
24 V encoder supply
● 24 V No
Power loss
Power loss, typ. 1.7 W
Address area
Address space per module
● Inputs 2 byte; + 2 bytes for QI information
Hardware configuration
Automatic encoding Yes
● Mechanical coding element Yes
Selection of BaseUnit for connection variants
● 1-wire connection BU type A0
● 2-wire connection BU type A0 + Potential isolation module
● 3-wire connection BU type A0 + Potential isolation module
● 4-wire connection BU type A0 + Potential isolation module
Digital inputs
Number of digital inputs 16
Digital inputs, parameterizable Yes
Source/sink input P-reading
Input characteristic curve in accordance with IEC Yes
61131, type 3
Input voltage
● Rated value (DC) 24 V
● for signal "0" -30 to +5V
● for signal "1" +11 to +30V
Input current
● for signal "1", typ. 2.5 mA
Input delay (for rated value of input voltage)
for standard inputs
Encoder
Connectable encoders
● 2-wire sensor Yes
— permissible quiescent current (2-wire 1.5 mA
sensor), max.
Isochronous mode
Isochronous operation (application synchronized up No
to terminal)
Interrupts/diagnostics/status information
Diagnostics function Yes
Alarms
● Diagnostic alarm Yes
Diagnostic messages
● Diagnostic information readable Yes
● Monitoring the supply voltage Yes
— parameterizable Yes
● Monitoring of encoder power supply No
● Wire-break Yes; Module-by-module, optional protective circuit for preventing
wire-break diagnostics in the case of simple encoder contacts: 25
kOhm to 45 kOhm
● Short-circuit No
● Group error Yes
Diagnostics indication LED
● Monitoring of the supply voltage (PWR-LED) Yes; Green PWR LED
● Channel status display Yes; Green LED
● for channel diagnostics No
● for module diagnostics Yes; green/red DIAG LED
Potential separation
Potential separation channels
● between the channels No
● between the channels and backplane bus Yes
Isolation
Isolation tested with 707 V DC (type test)
Ambient conditions
Ambient temperature during operation
● horizontal installation, min. -30 °C
● horizontal installation, max. 60 °C
● vertical installation, min. -30 °C
● vertical installation, max. 50 °C
Altitude during operation relating to sea level
● Installation altitude above sea level, max. 5 000 m; Restrictions for installation altitudes > 2 000 m, see
manual
Dimensions
Width 15 mm
Height 73 mm
Depth 58 mm
Weights
Weight, approx. 28 g
General information
Product type designation AI 8xI 2-/4-wire BA
HW functional status from FS04
Firmware version
● FW update possible Yes
usable BaseUnits BU type A0, A1
Color code for module-specific color identification CC01
plate
Product function
● I&M data Yes; I&M0 to I&M3
● Measuring range scalable No
Engineering with
● STEP 7 TIA Portal configurable/integrated as of V13 SP1
version
● STEP 7 configurable/integrated as of version V5.5 SP3 / -
● PROFIBUS as of GSD version/GSD revision GSD Revision 5
● PROFINET as of GSD version/GSD revision GSDML V2.3
Operating mode
● Oversampling No
Supply voltage
Rated value (DC) 24 V
permissible range, lower limit (DC) 19.2 V
permissible range, upper limit (DC) 28.8 V
Reverse polarity protection Yes
Input current
Current consumption, max. 25 mA; without sensor supply
Encoder supply
24 V encoder supply
● 24 V Yes
● Short-circuit protection Yes
● Output current, max. 0.7 A; total current of all encoders/channels
Power loss
Power loss, typ. 0.7 W; Without encoder supply voltage
Address area
Address space per module
● Address space per module, max. 16 byte
Hardware configuration
Automatic encoding
● Mechanical coding element Yes
Selection of BaseUnit for connection variants
● 1-wire connection BU type A0, A1
● 2-wire connection BU type A0, A1
● 4-wire connection BU type A0, A1 + potential distributor module
Analog inputs
Number of analog inputs 8; Single-ended
● For current measurement 8
permissible input current for current input (destruction 50 mA
limit), max.
Cycle time (all channels), min. 1 ms; per channel
Input ranges (rated values), currents
● 0 to 20 mA Yes
● Input resistance (0 to 20 mA) 100 Ω; 15 bit
● -20 mA to +20 mA Yes
● Input resistance (-20 mA to +20 mA) 100 Ω; 16 bit incl. sign
Encoder
Connection of signal encoders
● for voltage measurement No
● for current measurement as 2-wire transducer Yes
— Burden of 2-wire transmitter, max. 650 Ω
● for current measurement as 4-wire transducer Yes
Errors/accuracies
Linearity error (relative to input range), (+/-) 0.01 %
Temperature error (relative to input range), (+/-) 0.005 %/K
Crosstalk between the inputs, min. 50 dB
Repeat accuracy in steady state at 25 °C (relative to 0.05 %
input range), (+/-)
Operational error limit in overall temperature range
● Current, relative to input range, (+/-) 0.5 %
Basic error limit (operational limit at 25 °C)
● Current, relative to input range, (+/-) 0.3 %
Interference voltage suppression for f = n x (f1 +/- 1 %), f1 = interference frequency
● Series mode interference (peak value of 70 dB; With conversion time 67.5 / 22.5 / 18.75 ms: 40 dB
interference < rated value of input range), min.
Isochronous mode
Isochronous operation (application synchronized up No
to terminal)
Interrupts/diagnostics/status information
Diagnostics function Yes
Alarms
● Diagnostic alarm Yes
Potential separation
Potential separation channels
● between the channels No
● between the channels and backplane bus Yes
● between the channels and the power supply of No
the electronics
Isolation
Isolation tested with 707 V DC (type test)
Ambient conditions
Ambient temperature during operation
● horizontal installation, min. -30 °C
● horizontal installation, max. 60 °C
● vertical installation, min. -30 °C
● vertical installation, max. 50 °C
Altitude during operation relating to sea level
● Installation altitude above sea level, max. 5 000 m; Restrictions for installation altitudes > 2 000 m, see
manual
Dimensions
Width 15 mm
Height 73 mm
Depth 58 mm
Weights
Weight, approx. 31 g
General information
Product type designation AI 4x RTD/TC 2/3/4-wire HF, PU 1
HW functional status From FS08
Firmware version
● FW update possible Yes
usable BaseUnits BU type A0, A1
Color code for module-specific color identification CC00
plate
Product function
● I&M data Yes; I&M0 to I&M3
● Adjustment of measuring range Yes
Engineering with
● STEP 7 TIA Portal configurable/integrated as of V14
version
● STEP 7 configurable/integrated as of version V5.6
● PCS 7 configurable/integrated as of version V8.1 SP1
● PROFIBUS as of GSD version/GSD revision One GSD file each, Revision 3 and 5 and higher
● PROFINET as of GSD version/GSD revision GSDML V2.3
Operating mode
Supply voltage
Rated value (DC) 24 V
permissible range, lower limit (DC) 19.2 V
permissible range, upper limit (DC) 28.8 V
Reverse polarity protection Yes
Input current
Current consumption, max. 35 mA
Power loss
Power loss, typ. 0.75 W
Address area
Address space per module
● Address space per module, max. 8 byte; + 1 byte for QI information
Hardware configuration
Automatic encoding Yes
● Mechanical coding element Yes
Selection of BaseUnit for connection variants
● 2-wire connection BU type A0, A1
● 3-wire connection BU type A0, A1
Analog inputs
Number of analog inputs 4
permissible input voltage for voltage input 30 V
(destruction limit), max.
Cycle time (all channels), min. Sum of the basic conversion times and additional processing
times (depending on the parameterization of the active channels);
for line compensation in case of a three-wire connection, an
additional cycle is necessary
Technical unit for temperature measurement Yes; °C/°F/K
adjustable
Input ranges (rated values), voltages
● -1 V to +1 V Yes; 16 bit incl. sign
● Input resistance (-1 V to +1 V) 1 MΩ
● -250 mV to +250 mV Yes; 16 bit incl. sign
● Input resistance (-250 mV to +250 mV) 1 MΩ
● -50 mV to +50 mV Yes; 16 bit incl. sign
● Input resistance (-50 mV to +50 mV) 1 MΩ
Encoder
Connection of signal encoders
● for voltage measurement Yes
● for resistance measurement with two-wire Yes
connection
● for resistance measurement with three-wire Yes
connection
● for resistance measurement with four-wire Yes
connection
Errors/accuracies
Linearity error (relative to input range), (+/-) 0.01 %; ±0.1 % for resistance thermometers and resistance
Temperature error (relative to input range), (+/-) 0.0009 %/K; ±0.005 % / K at thermocouple
Crosstalk between the inputs, min. -50 dB
Repeat accuracy in steady state at 25 °C (relative to 0.05 %
input range), (+/-)
Operational error limit in overall temperature range
● Voltage, relative to input range, (+/-) 0.1 %
● Resistance, relative to input range, (+/-) 0.1 %
Basic error limit (operational limit at 25 °C)
● Voltage, relative to input range, (+/-) 0.05 %
● Resistance, relative to input range, (+/-) 0.05 %
Interference voltage suppression for f = n x (f1 +/- 1 %), f1 = interference frequency
● Series mode interference (peak value of 70 dB
interference < rated value of input range), min.
● Common mode voltage, max. 10 V
● Common mode interference, min. 90 dB
Isochronous mode
Isochronous operation (application synchronized up No
to terminal)
Interrupts/diagnostics/status information
Diagnostics function Yes
Alarms
Potential separation
Potential separation channels
● between the channels No
● between the channels and backplane bus Yes
● between the channels and the power supply of Yes
the electronics
Isolation
Isolation tested with 707 V DC (type test)
Ambient conditions
Ambient temperature during operation
● horizontal installation, min. -30 °C
● horizontal installation, max. 60 °C
● vertical installation, min. -30 °C
● vertical installation, max. 50 °C
Altitude during operation relating to sea level
● Installation altitude above sea level, max. 5 000 m; Restrictions for installation altitudes > 2 000 m, see
manual
Dimensions
Width 15 mm
Height 73 mm
Depth 58 mm
Input
Input DC voltage
Supply voltage
● at DC 24 ... 24 V
Input voltage
● at DC 19 ... 29 V
Output
Output Controlled, isolated DC voltage
Rated voltage Vout DC 24 V
Output voltage Vin - approx. 0.5 V
Product function Output voltage adjustable No
Status display Green LED for "both Input voltages > switching threshold"; red
LED: for "at least one input voltage < switching threshold"
Signaling Isolated relay contact (contact rating 6 A/42 V AC, 30 V DC):
Contact closed if both input voltages > switching threshold, setting
range of switching threshold 20 V ± 0.5V to 25 V ± 0.5V
Rated current value Iout rated 10 A
Current range 10 A
● Note max. aggregate current 10 A
Safety
Galvanic isolation yes, SELV acc. to EN 60950-1 (relay contact)
Protection class Class III
Degree of protection (EN 60529) IP20
Approvals
CE mark Yes
UL/cUL (CSA) approval cULus-Listed (UL 508, CSA C22.2 No. 107.1), File E197259
Explosion protection -
FM approval -
CB approval No
Marine approval -
EMC
Emitted interference EN 55022 Class B
Noise immunity EN 61000-6-2
environmental conditions
Ambient temperature
● during operation -20 ... +70 °C
— Note with natural convection
● during transport -40 ... +85 °C
● during storage -40 ... +85 °C
Humidity class according to EN 60721 Climate class 3K3, 5 … 95% no condensation
Mechanics
Connection technology screw-type terminals
Connections
● Supply input Input, output and ground: removable screw terminal, each 1 x 0.5
... 2.5 mm² single-core/finely stranded
● Auxiliary Relay contact: 2 screw terminals for 0.5 ... 2.5 mm² single-
core/finely stranded
Width of the enclosure 30 mm
Height of the enclosure 80 mm
Depth of the enclosure 100 mm
Required spacing
● top 50 mm
● bottom 50 mm
● left 0 mm
● right 0 mm
Weight, approx. 0.125 kg
Input
Input 1-phase AC
● Note Automatic range selection
Supply voltage
● 1 at AC Rated value 120 V
● 2 at AC Rated value 230 V
Input voltage
● 1 at AC 85 ... 132 V
● 2 at AC 170 ... 264 V
Wide-range input No
Overvoltage resistance 2.3 × Vin rated, 1.3 ms
Mains buffering at Vin = 93/187 V
Mains buffering at Iout rated, min. 20 ms; at Vin = 93/187 V
Rated line frequency 1 50 Hz
Rated line frequency 2 60 Hz
Rated line range 47 ... 63 Hz
Input current
● at rated input voltage 120 V 2.34 A
● at rated input voltage 230 V 1.36 A
Output
Output Controlled, isolated DC voltage
Rated voltage Vout DC 24 V
Total tolerance, static ± 3 %
Static mains compensation, approx. 0.1 %
Static load balancing, approx. 1 %
Residual ripple peak-peak, max. 150 mV
Residual ripple peak-peak, typ. 30 mV
Spikes peak-peak, max. (bandwidth: 20 MHz) 240 mV
Spikes peak-peak, typ. (bandwidth: 20 MHz) 140 mV
Adjustment range 22.8 ... 28 V
Product function Output voltage adjustable Yes
Output voltage setting via potentiometer
Status display Green LED for 24 V OK
Signaling Relay contact (NO contact, rating 60 V DC/ 0.3 A) for "24 V OK"
On/off behavior Overshoot of Vout < 3 %
Startup delay, max. 0.3 s
Voltage rise, typ. 15 ms
Rated current value Iout rated 5 A
Current range 0 ... 6 A
● Note 6 A up to +45°C; +60 ... +70 °C: Derating 1.6%/K
Supplied active power typical 144 W
Short-term overload current
● on short-circuiting during the start-up typical 18 A
● at short-circuit during operation typical 18 A
Duration of overloading capability for excess current
● on short-circuiting during the start-up 800 ms
● at short-circuit during operation 800 ms
Parallel switching for enhanced performance Yes
Numbers of parallel switchable units for enhanced 2
performance
Efficiency
Efficiency at Vout rated, Iout rated, approx. 88 %
Power loss at Vout rated, Iout rated, approx. 16 W
Closed-loop control
Dynamic mains compensation (Vin rated ±15 %), 0.3 %
max.
Safety
Primary/secondary isolation Yes
Galvanic isolation Safety extra-low output voltage Uout acc. to EN 60950-1 and EN
50178
Protection class Class I
Leakage current
● maximum 3.5 mA
● typical 0.4 mA
Degree of protection (EN 60529) IP20
Approvals
CE mark Yes
UL/cUL (CSA) approval cULus-Listed (UL 508, CSA C22.2 No. 107.1), File E197259,
cCSAus (CSA C22.2 No. 60950-1, UL 60950-1)
Explosion protection IECEx Ex nA nC IIC T4 Gc; ATEX (EX) II 3G Ex nA nC IIC T4 Gc;
cULus Class I Div. 2 (ANSI/ISA-12.12.01-2007, CSA C22.2 No.
213-M1987) Group ABCD, T4; cCSAus (CSA C22.2 No. 213,
ANSI/ISA-12.12.01) Class I, Div. 2, Group ABCD, T4
FM approval -
CB approval Yes
Marine approval BV, DNV GL
EMC
Emitted interference EN 55022 Class B
Supply harmonics limitation EN 61000-3-2
Noise immunity EN 61000-6-2
environmental conditions
Ambient temperature
● during operation -25 ... +70 °C
— Note with natural convection
● during transport -40 ... +85 °C
Mechanics
Connection technology screw-type terminals
Connections
● Supply input L, N, PE: 1 screw terminal each for 0.5 ... 2.5 mm² single-
core/finely stranded
● Output +, -: 2 screw terminals each for 0.5 ... 2.5 mm²
● Auxiliary Alarm signals: 2 screw terminals for 0.5 ... 2.5 mm²
● signaling contact 2 screw terminals for 0.5 ... 2.5 mm²
Width of the enclosure 50 mm
Height of the enclosure 125 mm
Depth of the enclosure 120 mm
Required spacing
● top 50 mm
● bottom 50 mm
● left 0 mm
● right 0 mm
Weight, approx. 0.5 kg
Product feature of the enclosure housing for side-by- Yes
side mounting
Installation Snaps onto DIN rail EN 60715 35x7.5/15
Electrical accessories Buffer module
Mechanical accessories Device identification label 20 mm × 7 mm, pale turquoise
3RT1900-1SB20
MTBF at 40 °C 1 998 441 h
Other information Specifications at rated input voltage and ambient temperature +25
°C (unless otherwise specified)
Main
Disclaimer: This documentation is not intended as a substitute for and is not to be used for determining suitability or reliability of these products for specific user applications
Range TeSys
Product name TeSys DF
Product or component type Fuse carrier
Device short name DF10
Product compatibility DF2CA fuse cartridge
DF2CN fuse cartridge
Poles description 1P
Fuse size 10 x 38 mm
Fuse type , aM
, gG
Control type Toggle padlockable
Utilisation category AC-20B conforming to IEC 60947-3
DC-20B conforming to IEC 60947-3
[Ue] rated operational voltage 690 V AC
690 V DC
[Ie] rated operational current 32 A
[Ui] rated insulation voltage 1000 V AC
[Uimp] rated impulse withstand voltage 6 kV
Overvoltage category III
Short-circuit withstand 120 kA 400 V conforming to IEC 60947-3
Power dissipation in W 3 W maximum power dissipation by fuse
Complementary
Standards EN/IEC 60947-3
EN/IEC 60269-2
UL 4248-1
CSA C22.2 No 4248-1
EN 45545-2: R22 HL2
Product certifications IEC
UL recognized
CSA
CCC
EAC
DNV-GL
Mounting support 35 mm symmetrical DIN rail
Environment
Ambient air temperature for storage -40…70 °C
Ambient air temperature for operation -40…70 °C with derating above 20°C
Operating altitude 0...2000 m without derating
IP degree of protection IP20
Pollution degree 3
Fire resistance 960 °C conforming to IEC 60695-2-1
Compatibility code DF10
Offer Sustainability
REACh Regulation REACh Declaration
REACh free of SVHC Yes
EU RoHS Directive Compliant
EU RoHS Declaration
Toxic heavy metal free Yes
Mercury free Yes
RoHS exemption information Yes
China RoHS Regulation China RoHS declaration
WEEE The product must be disposed on European Union markets following specific waste collection and
never end up in rubbish bins
Contractual warranty
Warranty 18 months
2
PRODUCT-DETAILS
S202-C6
Miniature Circuit Breaker - S200 - 2P - C - 6
ampere
General Information
Extended Product Type S202-C6
Product ID 2CDS252001R0064
EAN 4016779465502
Catalog Description Miniature Circuit Breaker - S200 - 2P - C - 6 ampere
System pro M compact S200 miniature circuit breakers are current limiting. They have
two different tripping mechanisms, the delayed thermal tripping mechanism for
overload protection and the electromechanic tripping mechanism for short circuit
protection. They are available in different characteristics (B,C,D,K,Z), configurations
Long Description (1P,1P+N,2P,3P,3P+N,4P), breaking capacities (up to 6 kA at 230/400 V AC) and rated
currents (up to 63A). All MCBs of the product range S200 comply with IEC/EN 60898-1,
IEC/EN 60947-2, UL1077 (for this code purchased in South America there is no UL
certificate), allowing the use for residential, commercial and industrial applications.
Bottom-fitting auxiliary contact can be mounted on S200 to save 50% space.
Technical
Standards IEC/EN 60898-1
IEC/EN 60947-2
UL 1077
Number of Poles 2
Number of Protected 2
Poles
Tripping Characteristic C
Rated Current (I n ) 6A
Rated Operational acc. to IEC 60898-1 400 V AC
Voltage acc. to IEC 60947-2 440 V AC
Power Loss 4 W
S202-C6 2
Environmental
Ambient Air Operation -25 ... +55 °C
Temperature Storage -40 ... +70 °C
Reference Ambient Air 30 °C
Temperature
Resistance to Shock acc. 25g / 2 shocks / 13 ms
to IEC 60068-2-27
Resistance to Vibrations 5g, 20 cycles at 5 ... 150 ... 5 Hz with load 0.8 In
S202-C6 3
Technical UL/CSA
Maximum Operating 110 V DC
Voltage UL/CSA 480Y/277 V AC
Connecting Capacity Busbar 18-8 AWG
UL/CSA Conductor 18-4 AWG
Tightening Torque 25 in·lb
UL/CSA
Interrupting Rating acc. (110 V DC) 10 kA
to UL1077 (277 V AC) 6 kA
(480Y / 277 V AC) 6 kA
Dimensions
Product Net Width 35 mm
Product Net Depth / 69 mm
Length
Product Net Height 88 mm
Product Net Weight 0.25 kg
Container Information
Package Level 1 Units 5 piece
Package Level 1 Width 92 mm
Package Level 1 Depth / 183 mm
Length
Package Level 1 Height 80 mm
Package Level 1 Gross 1.3 kg
Weight
Package Level 1 EAN 4016779608299
Package Level 2 Units 60 piece
Package Level 2 Width 275 mm
Package Level 2 Depth / 395 mm
Length
Package Level 2 Height 210 mm
Package Level 2 Gross 14.8 kg
Weight
Package Level 2 EAN 4016779972215
Ordering
Minimum Order Quantity 1 piece
Customs Tariff Number 85362010
E-Number (Sweden) 2100552
Manuals
RoHS Information 2CDK400003K0203
Popular Downloads
Data Sheet, Technical 9AKK107046A0423
Information
Instructions and 2CSC400002D0208
Manuals
Classifications
Object Classification F
Code
ETIM 6 EC000042 - Miniature circuit breaker (MCB)
ETIM 7 EC000042 - Miniature circuit breaker (MCB)
eClass 7.0 27141901
UNSPSC 39121614
Accessories
S202-C6 5
Unit Of
Identifier Description Type Quantity
Measure
2CCA880100R0001 sistema misura multipartenze CMS CMS-100PS 1 piece
2CCA880101R0001 sistema misura multipartenze CMS CMS-101PS 1 piece
2CCA880102R0001 sistema misura multipartenze CMS CMS-102PS 1 piece
2CDS200909R0001 S2C-A1 - S2C - A1- 12-60V c.a./c.c. (1 mod.) S2C-A1 1 piece
S2C-A2 - S2C - A2- 110-415V c.a./110-250 V c.c.
2CDS200909R0002 S2C-A2 1 piece
(1 mod.)
2CDS200912R0001 S2C-H6R - S2C - H 6R- 1NA+1NC (1/2 mod.) S2C-H6R 1 piece
2CDS200918R0001 S2C-NT - Hand Operated Neutral S2C-NT 1 piece
2CDS200922R0001 S2C-S/H6R - S2C - S/H 6R- 1NA+1NC (1/2 mod.) S2C-S/H6R 1 piece
S2C-H11L - S2C-H11L- 1NA+1NC montaggio a
2CDS200936R0001 S2C-H11L 1 piece
sinistra (1/2 mod.)
S2C-H20L - S2C-H20L- 2NA montaggio a
2CDS200936R0002 S2C-H20L 1 piece
sinistra (1/2 mod.)
S2C-H02L - S2C-H02L- 2NC montaggio a
2CDS200936R0003 S2C-H02L 1 piece
sinistra (1/2 mod.)
2CDS200946R0001 S2C-H6-11R - Auxiliary Contact S2C-H6-11R 1 piece
2CDS200946R0002 S2C-H6-20R - Auxiliary Contact S2C-H6-20R 1 piece
2CDS200946R0003 S2C-H6-02R - Auxiliary Contact S2C-H6-02R 1 piece
2CDS200970R0001 S2C-H01 - S2C-H01- sottoposto 1NC S2C-H01 1 piece
2CDS200970R0002 S2C-H10 - S2C-H10- sottoposto 1NA S2C-H10 1 piece
2CSS200911R0001 S2C-UA 12 DC - S2C - UA 12 DC- 12V c.c. (1 mod.) S2C-UA 12 DC 1 piece
S2C-UA 24 AC - S2C - UA 24 AC- 24V c.a. (1
2CSS200911R0002 S2C-UA 24 AC 1 piece
mod.)
S2C-UA 48 AC - S2C - UA 48 AC- 48V c.a. (1
2CSS200911R0003 S2C-UA 48 AC 1 piece
mod.)
S2C-UA 110 AC - S2C - UA 110 AC- 110V c.a. (1
2CSS200911R0004 S2C-UA 110 AC 1 piece
mod.)
S2C-UA 230 AC - S2C - UA 230 AC- 230V c.a. (1 S2C-UA 230
2CSS200911R0005 1 piece
mod.) AC
S2C-UA 400 AC - S2C - UA 400 AC- 400V c.a. (1 S2C-UA 400
2CSS200911R0006 1 piece
mod.) AC
S2C-UA 24 DC - S2C - UA 24 DC- 24V c.c. (1
2CSS200911R0007 S2C-UA 24 DC 1 piece
mod.)
S2C-UA 48 DC - S2C - UA 48 DC- 48V c.c. (1
2CSS200911R0008 S2C-UA 48 DC 1 piece
mod.)
S2C-UA 110 DC - S2C - UA 110 DC- 110V c.c. (1
2CSS200911R0009 S2C-UA 110 DC 1 piece
mod.)
S2C-UA 230 DC - S2C - UA 230 DC- 230V c.c. (1 S2C-UA 230
2CSS200911R0010 1 piece
mod.) DC
2CSS200998R0001 S2C-BP - Mechanical tripping device S2C-BP 1 piece
2CSS200999R0001 S2C-EST - S2C-EST S2C-EST 1 piece
2CSS201997R0013 S2C-CM1 - S2C-CM1- S200 1P S2C-CM1 1 piece
2CSS203997R0013 S2C-CM2/3 - S2C-CM2/3-S200 2P-3P S2C-CM2/3 1 piece
2CSS204997R0013 S2C-CM4 - S2C-CM4- S200 4P S2C-CM4 1 piece
GHS2001901R0003 S2C-DH - S2C-DH S2C-DH 1 piece
Categories
Low Voltage Products and Systems → Modular DIN Rail Products → Miniature Circuit Breakers MCBs
Drives → Medium voltage AC drives → General Performance Drives → ACS5000 Water-Cooled
Drives → Medium voltage AC drives → Industrial drives → ACS1000
Drives → Medium voltage AC drives → Industrial drives → ACS2000
PRODUCT-DETAILS
S202-C16
Miniature Circuit Breaker - S200 - 2P - C - 16
ampere
General Information
Extended Product Type S202-C16
Product ID 2CDS252001R0164
EAN 4016779465908
Catalog Description Miniature Circuit Breaker - S200 - 2P - C - 16 ampere
System pro M compact S200 miniature circuit breakers are current limiting. They have
two different tripping mechanisms, the delayed thermal tripping mechanism for
overload protection and the electromechanic tripping mechanism for short circuit
protection. They are available in different characteristics (B,C,D,K,Z), configurations
Long Description (1P,1P+N,2P,3P,3P+N,4P), breaking capacities (up to 6 kA at 230/400 V AC) and rated
currents (up to 63A). All MCBs of the product range S200 comply with IEC/EN 60898-1,
IEC/EN 60947-2, UL1077 (for this code purchased in South America there is no UL
certificate), allowing the use for residential, commercial and industrial applications.
Bottom-fitting auxiliary contact can be mounted on S200 to save 50% space.
Technical
Standards IEC/EN 60898-1
IEC/EN 60947-2
UL 1077
Number of Poles 2
Number of Protected 2
Poles
Tripping Characteristic C
Rated Current (I n ) 16 A
Rated Operational acc. to IEC 60898-1 400 V AC
Voltage acc. to IEC 60947-2 440 V AC
Power Loss 5 W
S202-C16 2
Environmental
Ambient Air Operation -25 ... +55 °C
Temperature Storage -40 ... +70 °C
Reference Ambient Air 30 °C
Temperature
Resistance to Shock acc. 25g / 2 shocks / 13 ms
to IEC 60068-2-27
Resistance to Vibrations 5g, 20 cycles at 5 ... 150 ... 5 Hz with load 0.8 In
S202-C16 3
Technical UL/CSA
Maximum Operating 110 V DC
Voltage UL/CSA 480Y/277 V AC
Connecting Capacity Busbar 18-8 AWG
UL/CSA Conductor 18-4 AWG
Tightening Torque 25 in·lb
UL/CSA
Interrupting Rating acc. (110 V DC) 10 kA
to UL1077 (277 V AC) 6 kA
(480Y / 277 V AC) 6 kA
Dimensions
Product Net Width 35 mm
Product Net Depth / 69 mm
Length
Product Net Height 88 mm
Product Net Weight 0.25 kg
Container Information
Package Level 1 Units 5 piece
Package Level 1 Width 92 mm
Package Level 1 Depth / 183 mm
Length
Package Level 1 Height 80 mm
Package Level 1 Gross 1.3 kg
Weight
Package Level 1 EAN 4016779608428
Package Level 2 Units 60 piece
Package Level 2 Width 275 mm
Package Level 2 Depth / 395 mm
Length
Package Level 2 Height 210 mm
Package Level 2 Gross 14.8 kg
Weight
Package Level 2 EAN 4016779972352
Ordering
Minimum Order Quantity 1 piece
Customs Tariff Number 85362010
E-Number (Sweden) 2100560
Manuals
RoHS Information 2CDK400003K0203
Popular Downloads
Data Sheet, Technical 9AKK107046A0423
Information
Instructions and 2CSC400002D0208
Manuals
Classifications
Object Classification F
Code
ETIM 6 EC000042 - Miniature circuit breaker (MCB)
ETIM 7 EC000042 - Miniature circuit breaker (MCB)
eClass 7.0 27141901
UNSPSC 39121614
Accessories
S202-C16 5
Unit Of
Identifier Description Type Quantity
Measure
2CCA880100R0001 sistema misura multipartenze CMS CMS-100PS 1 piece
2CCA880101R0001 sistema misura multipartenze CMS CMS-101PS 1 piece
2CCA880102R0001 sistema misura multipartenze CMS CMS-102PS 1 piece
2CDS200909R0001 S2C-A1 - S2C - A1- 12-60V c.a./c.c. (1 mod.) S2C-A1 1 piece
S2C-A2 - S2C - A2- 110-415V c.a./110-250 V c.c.
2CDS200909R0002 S2C-A2 1 piece
(1 mod.)
2CDS200912R0001 S2C-H6R - S2C - H 6R- 1NA+1NC (1/2 mod.) S2C-H6R 1 piece
2CDS200918R0001 S2C-NT - Hand Operated Neutral S2C-NT 1 piece
2CDS200922R0001 S2C-S/H6R - S2C - S/H 6R- 1NA+1NC (1/2 mod.) S2C-S/H6R 1 piece
S2C-H11L - S2C-H11L- 1NA+1NC montaggio a
2CDS200936R0001 S2C-H11L 1 piece
sinistra (1/2 mod.)
S2C-H20L - S2C-H20L- 2NA montaggio a
2CDS200936R0002 S2C-H20L 1 piece
sinistra (1/2 mod.)
S2C-H02L - S2C-H02L- 2NC montaggio a
2CDS200936R0003 S2C-H02L 1 piece
sinistra (1/2 mod.)
2CDS200946R0001 S2C-H6-11R - Auxiliary Contact S2C-H6-11R 1 piece
2CDS200946R0002 S2C-H6-20R - Auxiliary Contact S2C-H6-20R 1 piece
2CDS200946R0003 S2C-H6-02R - Auxiliary Contact S2C-H6-02R 1 piece
2CDS200970R0001 S2C-H01 - S2C-H01- sottoposto 1NC S2C-H01 1 piece
2CDS200970R0002 S2C-H10 - S2C-H10- sottoposto 1NA S2C-H10 1 piece
2CSS200911R0001 S2C-UA 12 DC - S2C - UA 12 DC- 12V c.c. (1 mod.) S2C-UA 12 DC 1 piece
S2C-UA 24 AC - S2C - UA 24 AC- 24V c.a. (1
2CSS200911R0002 S2C-UA 24 AC 1 piece
mod.)
S2C-UA 48 AC - S2C - UA 48 AC- 48V c.a. (1
2CSS200911R0003 S2C-UA 48 AC 1 piece
mod.)
S2C-UA 110 AC - S2C - UA 110 AC- 110V c.a. (1
2CSS200911R0004 S2C-UA 110 AC 1 piece
mod.)
S2C-UA 230 AC - S2C - UA 230 AC- 230V c.a. (1 S2C-UA 230
2CSS200911R0005 1 piece
mod.) AC
S2C-UA 400 AC - S2C - UA 400 AC- 400V c.a. (1 S2C-UA 400
2CSS200911R0006 1 piece
mod.) AC
S2C-UA 24 DC - S2C - UA 24 DC- 24V c.c. (1
2CSS200911R0007 S2C-UA 24 DC 1 piece
mod.)
S2C-UA 48 DC - S2C - UA 48 DC- 48V c.c. (1
2CSS200911R0008 S2C-UA 48 DC 1 piece
mod.)
S2C-UA 110 DC - S2C - UA 110 DC- 110V c.c. (1
2CSS200911R0009 S2C-UA 110 DC 1 piece
mod.)
S2C-UA 230 DC - S2C - UA 230 DC- 230V c.c. (1 S2C-UA 230
2CSS200911R0010 1 piece
mod.) DC
2CSS200998R0001 S2C-BP - Mechanical tripping device S2C-BP 1 piece
2CSS200999R0001 S2C-EST - S2C-EST S2C-EST 1 piece
2CSS201997R0013 S2C-CM1 - S2C-CM1- S200 1P S2C-CM1 1 piece
2CSS203997R0013 S2C-CM2/3 - S2C-CM2/3-S200 2P-3P S2C-CM2/3 1 piece
2CSS204997R0013 S2C-CM4 - S2C-CM4- S200 4P S2C-CM4 1 piece
GHS2001901R0003 S2C-DH - S2C-DH S2C-DH 1 piece
Categories
Low Voltage Products and Systems → Modular DIN Rail Products → Miniature Circuit Breakers MCBs
FLEX9024A Input: single-phase: 115 – 230 Vac
Output: 24 Vdc 60°C
Efficiency up to 89%
RoHS Strong overload without switch-off, up to 50%
Flexible Power continuity: from 95 to 120 W
“Power Good” Relay
Three mode of output protections:
1) Manual Reset
2) Hiccup Mode
3) Continuous Out Mode
DIN Rail Mountable
Extremely small size
3 Years warranty
Main
Range of product HDB3VR
Product or component Residual current circuit breaker (RCCB)
type
Poles description 2P
Earth-leakage protec- Class AC
tion class
It is the duty of any such user or integrator to perform the appropriate and complete risk analysis, evaluation and testing of the products with respect to the relevant specific application or use thereof.
Complementary
[In] rated current 25.0 A
Earth-leakage sensitivity 30.0 mA
The information provided in this documentation contains general descriptions and/or technical characteristics of the performance of the products contained herein.
Frame size 63AF
This documentation is not intended as a substitute for and is not to be used for determining suitability or reliability of these products for specific user applications.
[Ue] rated operational voltage 230 V AC
[Ui] rated insulation voltage 500 V
Mechanical durability 2000 cycles
Electrical durability 1000 cycles
Protection type Earth-leakage protection direct contact
Local signalling Mechanical indicatorfault:
Neither Himel nor any of its affiliates or subsidiaries shall be responsible or liable for misuse of the information contained herein.
Mounting support 35 mm DIN rail
Clamping connection capacity <= 25 mm²
Tightening torque 2…4.5 N.m
Embedding depth 43.5 mm
Environment
Environmental characteristic Fire retardant
Tropicalisation 2
Pollution degree 2
Ambient air temperature for operation -25…40 °C
Standards EN/IEC 61008-1
Product certifications TÜV
CE
CB
KTO 011: Thermostat (normally closed); contact breaker for regulating heaters.
KTS 011: Thermostat (normally open); contact maker for regulating of filter fans and heat
exchangers or for switching signal devised when temperature limit has been exceeded.
Technical Data
Specifications are subject to change without notice. Errors and omissions excepted. Suitability of this product for its intended use and any associated risks must be determined by the end customer/
04.08.2010
e.g. Signal
Thermostat Heater Thermostat e.g. Fan Thermostat
device
KTO 011 (NC) KTS 011 (NO) KTS 011 (NO)
Heater
Filter fan,
Cooling equipment,
Signal device
Connection diagrams Examples of connection
Setting range Art. No. Contact Breaker (NC) Art. No. Contact Maker (NO) Approvals
buyer in its final application.
28 ++ STEGO UK Ltd. + Unit 12, First Quarter Business Park + Blenheim Road + Epson, Surrey KT19 9QN + England + info@stego.co.uk + www.stego.co.uk ++
Plug-in Relays
w Schrack-Info
RT1
• 1 pole 12/16 A, AC or DC coil
• 1 CO or 1 NO
• Sensitive coil 400 mW/0.75 VA
• 5 kV, 10 mm coil/contact
• Appliance class II (VDE 0700)
• Safe disconnection compliant with VDE0160 in combination with socket YRT78626
• Ambient temperature 85°C (DC coil)
• Low component height 15.7 mm
• Gold plated contacts available
• Print and screw type sockets
• For boiler controls, timer relays, garage door controls, vending machines, interface modules
RT1 Inrush and High Inrush
• 1 pole 16 A, for high peak inrush current
• 1 NO
• RTS3T024 (= High Inrush) with Tungsten early-make contact
• Sensitive coil 400 mW
• 5 kV, 10 mm coil/contact
• Appliance class II (VDE 0700)
• Ambient temperature 85°C
• Low component height 15.7 mm
• Print and screw type sockets
• For household appliances, heating controls, light controls, building automation
RT2
• 2 poles 8 A, AC or DC coil
• 2 CO
• Sensitive coil 400 mW
• 5 kV, 10 mm coil/contact
• Appliance class II (VDE 0700)
• Safe disconnection compliant with VDE0160 in combination with socket YRT78626
Page • Low component height 15.7 mm
518 • Print and screw type sockets
• For household appliances, heating controls, emergency lighting, modems
Plug-in Relays
w Dimensions (mm)
Page
519
Plug-in Relays
w Rated Breaking Capacity & Coil Operating Voltage Range RT1 Inrush And High Inrush
RT1
CONTACT DATA 12 A 16 A
Number of contacts and type 1 CO or 1 NO contact
Contact style Single contact
Rated current 12 A 16 A
Rated voltage/ max. switching voltage AC 250 / 400 V~
Limiting continuous current 12 A 16 A, UL: 20 A
Max. rated breaking capacity AC 3000 VA 4000 VA
Limiting making current (max. 4 s at 10 % DF) 25 A 30 A
Contact material AgNi 90/10, AgNi 90/10 hard gold plated
COIL DATA
Rated voltage DC coil 5…110 V
AC coil 24…230 V~
Rated power DC coil 400 mW
AC coil 0.74 VA
Operative range, IEC 61810 2
Coil insulation system according to UL1446 Class F
Operation-/ release voltage/ coil resistance 24 V DC coil 16.8 V / 2.4 V / 1440 Ω ± 10%
at ambient temperature 23 °C 230 V AC coil 172.5 V / 34.5 V / 32500 Ω ± 10%
RT2
CONTACT DATA 8A
Number of contacts and type 2 CO
Contact style Single contact
Rated current 8A
Rated voltage/ max. switching voltage AC 250 V / 400 V~
Limiting continuous current 8 A, UL: 10 A
Max. rated breaking capacity AC 2000 VA
Limiting making current (max. 4 s at 10 % DF) 15 A
Contact material AgNi 90/10, AgNi 90/10 hard gold plated
COIL DATA
Rated voltage DC coil 5…110 V
AC coil 24…230 V~
Rated power DC coil 400 mW
AC coil 0.74 VA
Page Operative range, IEC 61810 2
Coil insulation system according to UL1446 Class F
522 Operation-/ release voltage/ coil resistance 24 V DC coil 16.8 V / 2.4 V / 1440 Ω ± 10%
at ambient temperature 23 °C 230 V AC coil 172.5 V / 34.5 V / 32500 Ω ± 10%
Plug-in Relays
Order no. blue: on stock, usually ready for delivery on the day of order
Plug-in Relays
w Schrack-Info
• 1 pole 16 A, 2 poles 8 A, 1 or 2 CO • Lockable manual testing system (see drawing “How To Use”)
• AC or DC coil, sensitive coil 400 mW • Optional model with mechanical and/or electrical indication
• Reinforced insulation, appliance class II (VDE 0700) • Suitable for standard RT sockets
• Safe disconnection compliant with VDE0160 in combination with • Recyclable packaging
socket YRT78626 • Complies with the 2002/95/EC RoHS Directive
• 4 kV, 8 mm coil/contact • For control panels, machine building
w Dimensions (mm)
Page
524
Order no. blue: on stock, usually ready for delivery on the day of order
6.ANALOG JUNCTION BOX
AJB-OO1
ANALOG JUNCTION BOX
AJB-001
Product data sheet NSYS3X4320H
Characteristics SPACIAL S3X stainless 316L, Scotch Brite®
finish, H400xW300xD200 mm.
Disclaimer: This documentation is not intended as a substitute for and is not to be used for determining suitability or reliability of these products for specific user applications
Main
Range Spacial
Product name Spacial S3X
Enclosure type Multi-purpose
Category Compact enclosure
Nominal height 400 mm
Nominal width 300 mm
Nominal depth 200 mm
Product installation Wall-mounting
Device composition 1 body
1 lock: door
1 door
Complementary
Body type Single piece body, cross-shaped structure
Gutter shaped front rail
Door type Plain
Number of doors Front face: 1 door(s)
Door opening side Reversible (120 °)
Lock type 3 mm double-bar lock
Mounting plate description Without mounting plate
Type of gland plate Without gland plate
Accessibility for operation Front
Removable parts Door by hinges
Material Lock: zamak
Hinge: stainless steel
Body and door: stainless steel 316L
Surface finish Body and door: Scotch-Brite® brushed
Lock: chromium plated
Thickness 1.5 mm
Environment
Standards IEC 62208
Product certifications CAN/CSA 22
UL 508 type A
IP degree of protection IP66 conforming to IEC 60529
IK degree of protection IK10 conforming to IEC 62262
Environmental characteristic Corrosive
Specific hygiene
Offer Sustainability
Sustainable offer status Green Premium product
REACh Regulation REACh Declaration
REACh free of SVHC Yes
EU RoHS Directive Pro-active compliance (Product out of EU RoHS legal scope)
EU RoHS Declaration
Toxic heavy metal free Yes
Mercury free Yes
RoHS exemption information Yes
China RoHS Regulation China RoHS declaration
Pro-active China RoHS declaration (out of China RoHS legal scope)
Environmental Disclosure Product Environmental Profile
Circularity Profile No need of specific recycling operations
Contractual warranty
Warranty 18 months
2
7.DIGITAL JUCTION BOX
DJB-001
DIGITAL JUNCTION BOX
DJB-001
Product data sheet NSYS3X4320H
Characteristics SPACIAL S3X stainless 316L, Scotch Brite®
finish, H400xW300xD200 mm.
Disclaimer: This documentation is not intended as a substitute for and is not to be used for determining suitability or reliability of these products for specific user applications
Main
Range Spacial
Product name Spacial S3X
Enclosure type Multi-purpose
Category Compact enclosure
Nominal height 400 mm
Nominal width 300 mm
Nominal depth 200 mm
Product installation Wall-mounting
Device composition 1 body
1 lock: door
1 door
Complementary
Body type Single piece body, cross-shaped structure
Gutter shaped front rail
Door type Plain
Number of doors Front face: 1 door(s)
Door opening side Reversible (120 °)
Lock type 3 mm double-bar lock
Mounting plate description Without mounting plate
Type of gland plate Without gland plate
Accessibility for operation Front
Removable parts Door by hinges
Material Lock: zamak
Hinge: stainless steel
Body and door: stainless steel 316L
Surface finish Body and door: Scotch-Brite® brushed
Lock: chromium plated
Thickness 1.5 mm
Environment
Standards IEC 62208
Product certifications CAN/CSA 22
UL 508 type A
IP degree of protection IP66 conforming to IEC 60529
IK degree of protection IK10 conforming to IEC 62262
Environmental characteristic Corrosive
Specific hygiene
Offer Sustainability
Sustainable offer status Green Premium product
REACh Regulation REACh Declaration
REACh free of SVHC Yes
EU RoHS Directive Pro-active compliance (Product out of EU RoHS legal scope)
EU RoHS Declaration
Toxic heavy metal free Yes
Mercury free Yes
RoHS exemption information Yes
China RoHS Regulation China RoHS declaration
Pro-active China RoHS declaration (out of China RoHS legal scope)
Environmental Disclosure Product Environmental Profile
Circularity Profile No need of specific recycling operations
Contractual warranty
Warranty 18 months
2
8.POWER PANEL
PP-OO1
POWER PANEL
PP-001
Premium Quality - Value Price
A-4 Wall-mounting enclosures
VS 9000
A. Electro galvanised steel
8
A4 - Wall-mounting enclosures VS 9000
9
Product data sheet HDB3WN3C10
Characteristics Miniature circuit breaker HDB3W - 18 mm AC -
C - 3P - 6 kA - 10 A
Main
Range of product HDB3w
Product or component Miniature circuit-breaker
type
Device application Isolation
Control
Poles description 3P
[In] rated current 10 A
It is the duty of any such user or integrator to perform the appropriate and complete risk analysis, evaluation and testing of the products with respect to the relevant specific application or use thereof.
Complementary
[Ue] rated operational voltage 415 V AC 50/60 Hz
Breaking capacity 6.0 kA
The information provided in this documentation contains general descriptions and/or technical characteristics of the performance of the products contained herein.
Dielectric test voltage 2.0 kV 50/60 Hz 1 min
This documentation is not intended as a substitute for and is not to be used for determining suitability or reliability of these products for specific user applications.
[Uimp] rated impulse withstand voltage 4.0 kV
Magnetic tripping limit 5...10 x In
Curve code C
[Ui] rated insulation voltage 250.0 V between phase and ground
500.0 V between phases
Mounting support 35 mm DIN rail
Neither Himel nor any of its affiliates or subsidiaries shall be responsible or liable for misuse of the information contained herein.
Protection type Overload protection
Short-circuit protection
Cable entry Top
Bottom
Mechanical durability 25000 cycles
Electrical durability 6000 cycles
IP degree of protection IP20
Overvoltage category II
Provision for padlocking Handle padlockable in on and off position
Connections - terminals Forked type tag connectors
Clamping connection capacity <= 25 mm²
Tightening torque 3 N.m
Height 80 mm
Width 53.099999999999994 mm
Depth 78.5 mm
Embedding depth 61 mm
Environment
Trip unit technology Thermal-magnetic
Shock resistance 30 gn (duration = 11.0 ms) for 3 shocks
Ambient air temperature for operation -20…60 °C
Ambient air temperature for storage -40…70 °C
Operating altitude 0...2000 m