The document summarizes a transmission-type speed sensor that uses friction and photoelectric switching to convert a conveyor belt's linear speed into a voltage pulse output. The sensor has a die-cast sealed shell for use in harsh environments and uses knurling and galvanizing to prevent slipping and abrasion. It is commonly used to measure the speed of belt conveyors and in electronic belt scales, with an operating voltage of 5-15VDC and outputting 10 or 100 pulses per meter traveled.
The document summarizes a transmission-type speed sensor that uses friction and photoelectric switching to convert a conveyor belt's linear speed into a voltage pulse output. The sensor has a die-cast sealed shell for use in harsh environments and uses knurling and galvanizing to prevent slipping and abrasion. It is commonly used to measure the speed of belt conveyors and in electronic belt scales, with an operating voltage of 5-15VDC and outputting 10 or 100 pulses per meter traveled.
The document summarizes a transmission-type speed sensor that uses friction and photoelectric switching to convert a conveyor belt's linear speed into a voltage pulse output. The sensor has a die-cast sealed shell for use in harsh environments and uses knurling and galvanizing to prevent slipping and abrasion. It is commonly used to measure the speed of belt conveyors and in electronic belt scales, with an operating voltage of 5-15VDC and outputting 10 or 100 pulses per meter traveled.
Depending on self-weight, the speed sensor make the friction
wheel rotate without slip come along with conveyor, and then the raster and photoelectricity switching circuit which are coaxial connected with friction wheel will switch belt linear speed to voltage pulse output.
2. Main Features
Die-casting sealed shell
Suitable for the on-site severe environment with the function of dampproof and dustproof. Knurl on the surface of friction wheel is of anti-skidding and galvanizing is of abrasion resistant.
3. Main Application
Electronic Belt Scale Speed Measurement
Belt Conveyor Speed Measurement
4. Property Index
Operating Voltage +5~+15VDC (±15%)
Operating Current ≤20mA Specification □10 pulse/meter █100 pulse/meter 10 pulse/meter: 0~4m/s Speed Measurement Range 100 pulse/meter: 0~2m/s Output Signal Voltage Pulse Operating Tempreture -30℃~+50℃ Relative Humidity <90%RH, no Condensation IP Grade IP65 NW. Approx. 5.5 kg GW. Approx. 6.8kg
5. Definition of four-core HY-A (With four meters long 3 core sheilded cable)
Pin Name Cable Color Signal Definition
1 Red Power Input+ 2 Blue Speed Pulse Output 3 Yellow GND 4 Shielding Layer Shield