Professional Documents
Culture Documents
INPUT DATA
MATERIAL PROPERTIES
SHAPE PROPERTIES
DESIGN PROPERTIES
Lb out 10 ft Lb in 10 ft Ltorque 10 ft
Lcomp top 10 ft Lcomp bot 10 ft Kin 1
Cb Autocalc
LOADS
POINT LOADS
DL 3 5
LOAD COMBINATIONS
Equation Code
Page 1 of 8
DIAGRAMS
REACTIONS
Page 2 of 8
Min/Max Horizontal (k) Vertical (k) Moment (k-ft)
Support 1 (@ 0 ft) Max 0 (IBC 16-1) 0 (IBC 16-8 POST) 0 (IBC 16-1)
Max 0 (IBC 16-1) -3.748 (IBC 16-1) 0 (IBC 16-1)
Support 2 (@ 10 ft) Max 0 (IBC 16-1) 0 (IBC 16-8 POST) 0 (IBC 16-1)
Max 0 (IBC 16-1) -3.748 (IBC 16-1) 0 (IBC 16-1)
CALCULATIONS
Page 3 of 8
Required shear strength about the y-axis at -
governing location
Effective shear area in local z-axis for required -
strength
Required shear strength about the z-axis at -
governing location
Modulus of elasticity -
Thickness of web -
Thickness of flange -
- -
- -
Page 4 of 8
CHECK EFFECTIVE SLENDERNESS RATIO
Effective length factor for the flexural buckling -
about the y-axis
Distance between points which brace the member -
against flexural buckling about the y-axis
Radius of gyration about the local y-axis (weak) -
Modulus of elasticity -
Modulus of elasticity -
Torsional constant -
Page 5 of 8
Flexural Analysis
- -
Thickness of flange -
- -
CHECK YIELDING
Specified minimum yield stress -
Nominal flexural strength for the plastic limit state (Eq. F2-1)
Page 6 of 8
Distance between the flange centroids -
Shear Analysis
Modulus of elasticity -
Thickness of flange -
Thickness of web -
- (Eq. G2-2)
Page 7 of 8
Bending & Axial Interaction Check (UC Bending Max)
Deflection Check
DL LL DL + LL
Deflection 0 in 0 in 0 in
Location 5 ft - 5 ft
L/Δ Ratio 3.5e+5 - 3.5e+5
L/Δ Limit (user input) 240 360 240
Unity Check 0 - 0
Page 8 of 8