Professional Documents
Culture Documents
Revolutionary Piping Isolation & Testing Technology: Applications Applications Applications
Revolutionary Piping Isolation & Testing Technology: Applications Applications Applications
Flange Weld Testing. Pressure can be Flange Weld Testing. Used in conjunction Pipe Testing. Test pipe sections without the
placed between the two seals to test weld- with a ported blind fl ange, GripSafe IIB plugs need for fl anges.
neck fl anges by means of hydrostatic stress the weld joint in longitudinal (axial),
pressure, checking for hoop stress failure, circumferential (hoop) and radial pressures Pipe Spool Testing. Perform hydrostatic
weld leaks and/or pinhole leak paths while identical to the stresses that would be testing of pipe spools, eliminating the need
providing protection from any unexpected induced when hydro-testing the entire piping for end caps and welding.
pressure discharge. system, making them superior to traditional
fl ange test plugs (FTPs) which apply hoop and Isolation. Increase safety by preventing
exposure to hydrocarbon or other process
Pre/Post Weld Operations. Dual port radial stresses only.
leaks. Eliminate risk of injury to personnel in
design provides enhanced cooling by
Pressure Vessels. Block outlet piping in the event of inadvertent valve openings, valve
circulating water between the seals during
vessels to pressurize for cleaning or testing leaks, or other pressure equipment failures
pre/post weld processes (on 6”+ models).
purposes. upstream.
Isolation. Increase safety by preventing Line Purging. Feed inert gases through
exposure to hydrocarbon or other process the vent pipe, into a vessel, for back-purging
leaks. Eliminate risk of injury to personnel in welds or to remove oxygen for other
the event of inadvertent valve openings, valve processes.
INDUSTRIES
Superior Self Gripping. The wedge system distributes equal loading across the gripping
Line Purging. Feed inert gases through wedges ensuring maximum surface contact and holding capabilities.
the vent pipe, into a vessel, for back-purging
Less Weight. Weighes less on average than competitive products.
welds or to remove oxygen for other
processes. No Pipe Surface Damage. GripSafe ST uses a specially designed wedge system that
grips the pipe without scarring the surface.
Manufactured Exclusively by USA Industries Non-Contaminating. Can be used on any metal type with no carbon contamination.
* Larger sizes available upon request