When acceleration or reduction speed rises up to over ‘60’ or [Actions to take]
[Meaning] falls down to below ‘0’ 3 or more times while speed profile for long-distance of 12mm is being created after LCD has been detected at a high-speed operation. 1. Increase or reduce the SPEC data for advance reduction distance of Min_Pre_Dec_Pet__D and [Explanation] Max_Pre_Dec_Pet__D with ANN. (1mm per 0x01)
Address Content
0x0229 Min_Pre_Dec_Pet__D(Increase)
0x022A Max_Pre_Dec_Pet__D(Decrease)
2. Verify if shield plate is fitted to a normal position at each
floor. Check SD1D~7D,SD1U~7U to see if they are fitted to a normal position and driven at a correct angle.
3. Check SPEC ROM and PCB.
1) Replace and check SPEC ROM of DOC-200 PCB. 2) Replace and check DOC-200 and DPC-1XX PCB.