1RO:34-2011
7.22 Provision of drainage composite
Prefabricated drainage composite (plastic spacer encased between impermeable layer of
low density polyethylene Geomembrane and Non-woven geotextile) of adequate thickness
over the full width of embankment is recommended as a capillary cutoff. This will avoid the
additional sand blanket, which is generally provided in any other method of capillary cutoff.
7.221 Properties of drainage composite for capillary cutotts:
Geotextile properties
Apparent Opening Size - EN ISO 12956 2 $0.15mm
Tensile strength - EN ISO 10319 28 kN/m
Permittvity - EN ISO 11058 2100 iim?.sec
Properties of Drainage Net
Mass per unit area - EN |SO 9864 2410 gim?
Impermeable geomembrane
Water proofing extruded film by Polyethylene
Property of Composite material
Widewidth Tensile Strength MD- EN ISO 10319: 2 18.5kNim
CBR Puncture Resistance - EN 1SO 12236 22.2KN
‘Mass per Unit Area - EN ISO 9864 2.830 gim?
Inplane permeability - EN ISO 12958
Hydraulic gradient (i= 1) @ 100 kPa 2 20.6ums
@ 200 KPa, 2 20.85 lms
Thickness of composite material EN ISO-9863 : 25mm
Note : Equivalent ASM and IS codes are glven in Anne:
7.2.8 Granular material cutoff (Refer para 4.7.2)
8 GUIDELINES/REMEDIAL MEASURES FOR SOME
SPECIFIC PROBLEMS
Bt Existing Roads on Low Embankments and Subgrade within Capillary
Fringe
‘Such roads get frequently damaged whenever water stands in the adjoining ground. For long
tarm maintenance frae pavement, itis suggestad that subgrade af the pavement shauld be
23