You are on page 1of 2

DSP-100 Dual Channel MADE IN

USA SERIAL I/O

RS-232 PCMCIA Card


⻬ PCMCIA PC Card
Standard Specification DSP-100 Series
$
2.1 Compliant
⻬ Client Software Driver
for DOS (PCMCIA Card
249
Services Specification
2.1 Compatible)
⻬ “Hot-Swapping”
Supported (Insertion
and Removal of
DSP-100 While System
is Powered Up)
⻬ Selectable and
Shareable Interrupt
(IRQ 3-7, 9-12, 14, 15)
⻬ Selectable I/O Base
Address
The DSP-100 is a dual channel
RS-232 asynchronous serial
adapter PCMCIA card which is
PC Card Specification 2.1
compliant. The DSP-100 inserts into
one Type II (5 mm) PCMCIA socket
and provides two asynchronous
RS-232 serial ports. These two
serial ports are implemented with
16550 UARTs; this will allow the In addition, a PCMCIA Card Services Maximum Baud Rate: 120 K
DSP-100 to be used in multitasking Version 2.1 compliant client driver for
environments and for applications Power Requirements: +5 volts,
DOS is provided which will provide for 25.75 mA (typical), 33.26 mA
involving high data rates. The automatic configuration of the DSP-
DSP-100 is accessed through (maximum)
100 upon each card insertion. This Connector: Two standard DSUB-9
standard D-9 connectors. will permit the DSP-100 to be “hot- male connectors via pigtail cables off
Users may select the particular I/O swapped”. The DSP-100 will be the PCMCIA card
address space at which the automatically configured upon each
DSP-100 is to be located. The two card insertion. A separate enabler
serial ports of the DSP-100 may be program is provided for the Connectors: Two D-9 Males
configured at either the standard configuration of the DSP-100 for those PIN 1: Carrier Detect
COM port I/O address locations or who wish to run the card without card PIN 2: Data Input
in a 16-byte continuous I/O address and socket services installed. PIN 3: Data Output
block. Also, the DSP-100 may be
PIN 4: Data Terminal Ready
configured at any one interrupt
level. An interrupt status register is Specifications PIN 5: Signal Ground
provided for determining the serial Bus Interface: PCMCIA PC Card PIN 6: Data Set Ready
port which was the source of the Standard 2.1 PIN 7: Request to Send
generated interrupt. Physical Dimensions: Type II PIN 8: Clear to Send
(5 mm) PCMCIA card PIN 9: Ring Indicator
Since the two serial ports must
share one hardware interrupt level,
an enhanced serial device driver is
provided for Windows To Order (Specify Model Number)
3.x/95/98/NT/2000. The driver will
allow two serial ports to share one Model No. Price Description
hardware interrupt level. A DSP-100 $249 Dual Channel RS232 PCMCIA card
configuration file is also provided Comes with complete user’s manual and PCMCIA configuration/driver software on CD Rom.
for operation under Windows 95. Also includes PCMCIA card to dual 9 pin connector cable.
Ordering Example: DSP-100 RS232 PCMCIA card, $249.

D4-13
Freephone 0800 488 488 | International +44(0) 161 777 6622 | Fax +44(0) 161 777 6622 | Sales@omega.co.uk

www.omega.co.uk
UNITED KINGDOM
www. omega.co.uk
Manchester, England
0800-488-488

UNITED STATES FRANCE


www.omega.com www.omega.fr
1-800-TC-OMEGA 088-466-342
Stamford, CT.

CANADA CZECH REPUBLIC


www.omega.ca www.omegaeng.cz
Laval(Quebec) Karviná, Czech Republic
1-800-TC-OMEGA 596-311-899

GERMANY BENELUX
www.omega.de www.omega.nl
Deckenpfronn, Germany 0800-099-33-44
0800-8266342

More than 100,000 Products Available!


Temperature Data Acquisition
Calibrators, Connectors, General Test and Measurement Auto-Dialers and Alarm Monitoring Systems,
Instruments, Handheld Instruments for Temperature Communication Products and Converters, Data
Measurement, Ice Point References, Indicating Labels, Acquisition and Analysis Software, Data Loggers
Crayons, Cements and Lacquers, Infrared Temperature Plug-in Cards, Signal Conditioners, USB, RS232, RS485
Measurement Instruments, Recorders, Relative Humidity and Parallel Port Data Acquisition Systems, Wireless
Measurement Instruments, PT100 Probes, PT100 Elements, Transmitters and Receivers
Temperature & Process Meters, Timers and Counters,
Temperature and Process Controllers and Power Switching Pressure, Strain and Force
Devices, Thermistor Elements, Probes and Assemblies,
Displacement Transducers, Dynamic Measurement Force
Thermocouples, Thermowells and Head and Well
Sensors, Instrumentation for Pressure and Strain
Assemblies, Transmitters, Thermocouple Wire, RTD Probes
Measurements, Load Cells, Pressure Gauges, Pressure
Flow and Level Reference Section, Pressure Switches, Pressure Transducers,
Air Velocity Indicators, Doppler Flowmeters, Level Proximity Transducers, Regulators, Pressure Transmitters,
Measurement, Magnetic Flowmeters, Mass Flowmeters, Strain Gauges, Torque Transducers, Valves
Pitot Tubes, Pumps, Rotameters, Turbine and Paddle Wheel
Flowmeters, Ultrasonic Flowmeters, Valves, Variable Area Heaters
Flowmeters, Vortex Shedding Flowmeters Band Heaters, Cartridge Heaters, Circulation Heaters,
Comfort Heaters, Controllers, Meters and Switching
pH and Conductivity Devices, Flexible Heaters, General Test and Measurement
Conductivity Instrumentation, Dissolved Oxygen Instruments, Heater Hook-up Wire, Heating Cable
Instrumentation, Environmental Instrumentation, pH Systems, Immersion Heaters, Process Air and Duct,
Electrodes and Instruments, Water and Soil Analysis Heaters, Radiant Heaters, Strip Heaters, Tubular Heaters
Instrumentation

You might also like