FACT SHEET Body builder preparation package BP-MI02
Body Builder prep kit Mixer 02 SPECIFICATION
Volvo has developed a mixer preparation package BP-MI02 based on the Volvo FM/FMX 6x4 and 8x4 rigid trucks. The solution is up Truck model ..................................................................FM / FMX 6x4R / 8x4R to Volvo’s high quality standards. Rear axle installation ............................RADD-BR / RADD-GR / RADD-G2 ...................................................................................... RADD-TR1 / RADD-TR2 Chassis height ................................................................................High / X-high Wheelbase 64R.....................................................................3400 / 3700 mm Wheelbase 84R.....................................................................4350 / 4600 mm
Rear frame adaptation depending on model version Features And benefits
The rear frame length is depending on vehicle specification. RFL2545 WB3400, 6x4 • Chassis prepared from factory reduces lead time by RFL2745 WB3700, 6x4 approximately by 4 days at body builder, increases the quality RFL2345 WB4350, 8x4 and makes the installation easier. RFL2595 WB4600, 8x4 • The complete vehicle is operational from the first day of delivery and the entire vehicle is up to Volvo’s high quality standards. • Many possible options available. • Whole vehicle type approved (WVTA).
2015-06-15 ENG Version 03 1 (2)
FACT SHEET Body builder preparation package BP-MI02
Below executions are included in BP-MI02
Power Take Off: PTER-100, rear engine mounted clutch independent power take off with DIN100/ISO7646 flange with a max torque capacity of 1000 Nm on the PTO. As option there is also a flange with SAE 1410 (PTER1400).
Pre set engine speed: 4 steps (600 / 900 / 1200 / 1500rpm)
(PCA40011).
Straight cut on rear frame end: Frame rails have a straight cut at the rear end of the frame (RFEC-S).
Body attachments: Chassis body attachment FBA-BTSF and
Body attachments extra holes in rear frame overhang for mixer end plate are used for all configurations. The consoles are mounted on frame rails. Upper front attachments, bolts, springs, nuts by-packed in cab.
Mudguards on second front axle: Mudguards for wheels on
second front axle (FFEND-B) on 8x4 models.
Preparation kit for cab mounded chassis working lamps:
WLC-PKCH, Preparation kit (cables and switch) for cab mounted chassis working lamp (connector is located inside chassis frame rail). Tail lamp protection box Tail lamp protection box: Tail lamp protection box in stainless steel (S93402). The box protects the tail lamps on two sides, top and back.