Professional Documents
Culture Documents
The D10024A is an advanced analog fire alarm control panel Fire System Controller
(FACP) that identifies points using intelligent, addressable Use the Fire System Controller in the front of the control
devices. On the front of the control panel, light-emitting panel for total system control. Its keypad allows installer
diodes (LEDs) show power, trouble, supervisory, alarm, and and end user programming, event viewing, and device
reset conditions, and the keypad is used for system control control. The D10024A has four keys dedicated to System
and programming. In addition, an 80-character Reset, Alarm Silence, Trouble Silence, and Drill functions.
alphanumeric LCD annunciator provides programmed Active devices are identified through custom text and LEDs
device point information, and four keys are dedicated to that display on the front of the control panel and at the
Reset, Alarm Silence, Trouble Silence, and Drill functions. optional external annunciators.
The D10024A has four onboard notification appliance Indication (Output) Circuits
circuits (NAC) that can be expanded through the use of The D10024A has four on-board circuits for indicating
addressable NAC modules. These circuits can be devices and supports up to 400 programmable and
programmed with specific alarm patterns. addressable remote output circuits for auxiliary control.
These circuits can be programmed for specific alarm
patterns and timed output.
Functions Networking
Event Activity Log Each D10024A has five expansion slots for plug-in polling
The FACP stores up to 500 events in its memory log; circuit modules (D9067). Each module supports 126 analog
recording the time, date, event, and point ID for each event. addressable devices, giving the FACP up to 630 addresses
Events include alarm, system restoral, trouble status, and in a stand-alone system. To simplify system operation,
system status events. The events stored in memory can be flexible system design allows device points to be grouped
retrieved and displayed at the front panel LCD display. In together and identified as one location or zone. Up to four
addition, an 80-character alphanumeric LCD annunciator FACPs can be connected in a shared zone network with up
shows programmed device point information. to 2520 addressable points in 100 zones. Nine
independently‑operating FACPs can report to a dedicated
master FACP in a report and control network.
www.boschsecurity.com
2 | D10024A Analog Fire Alarm Control Panel
Sensor Circuit
Ordering Information
D10024A Analog Fire Alarm Control Panel D10024A
Up to 630 analog-addressable devices; ex-
pandable modular design
Accessories
D9082 Glass Door Kit D9082
For use with the D10024A FACP. Includes two
clear plastic panels, mounting hardware, and
ground strap.
www.boschsecurity.com
4 | D10024A Analog Fire Alarm Control Panel
© Bosch Security Systems Inc. 2010 | Data subject to change without notice
T1114285963 | Cur: en-US, V5, 4 Jul 2010