Professional Documents
Culture Documents
- Information -
1
How to change a driver card
- Information -
Screw
Black Safety pin
Take care during the whole procedure. Do not use too much
force everything should get of very smooth.
Mark the plugs with the name of the sockets and disconnect them.
Remove all screws.
Unlock all of the black safety pins in the middle of the pin (best with
a small screw driver).
Remove or disconnect the old board from the Powerstack.
2
How to change a driver card
- Information -
DR110/TR110
3
How to change a driver card
- Information -
Take care during the whole procedure. Do not use too much
force everything should get on very smooth.
Lock all of the black safety pins.
Reconnect all screws.
Reconnect the marked plugs to the correct Terminals.
Check visually, if everything is installed and reconnected properly.
Reinstall all Covers.