Professional Documents
Culture Documents
CORCHEM 206I
High Build Elastomeric Waterp roofing Membrane Coating Based o n
Polyurethane
CORCHEM 206 I is a single component, high Fast and easy application eliminating
solid content moisture cured polyurethane construction delays and is labour
saving.
based tar extended elastomeric protective
Crack-bridging capacity 3-5mm
coating system , ideally suited for
waterproofing of roof , walls and foundation APPLICATION AREAS
As barrier coating for any part of the
conforming to ASTM C-836-03 and ASTM
external or internal faces of the
C 898-09
structures where high degree of
CORCHEM 206 I SHALL BE APPLIED DIRECTLY waterproofing is required, e.g. new
FROM DRUM. roof, Water reservoir, Swimming Pool
etc.
On drying, CORCHEM 206 I forms a seamless
elastomeric protective and waterproofing Structure subject to adverse chemical
or marine climatic attack or fungal
membrane.
growth zone, e.g. Chemical Plant, Oil
CORCHEM 206 I being viscous, it can be easily Refineries etc.
applied on vertical surface. It has excellent General concrete structures, masonry,
adhesion to dry as well as primed surfaces of brick, tile asbestos, galvanized tin,
concrete, tile, plaster, masonry, mastic coating refurbishing old waterproofing system
and metal. including torch-on –membrane etc.
FEATURES
METHOD OF USE
Excellent resistance to water, Alkalies, Surface Pr eparation
with an inherent properties of anti-
fungal growth. The area to be coated must be sound, clean
Excellent Compatibility with almost and free from oil, grease or any other surface
every construction material. contaminates. Remove any loose materials or
Flexible enough to withstand wide
laitance by scrapping, chipping, mechanical
range of thermal expansion and
contraction of structure. abrasion or any other suitable methods.
Waterproofing Coating
TECHNICAL DATA
Important Note:
All CICO products are sold in the market after strict Quality Control in line of ISO 9001 and guaranteed against any manufacturing
defect. Although the basic formulation of Company’s products generally remains unchanged, production refinements arising from
continuing research and evaluation program may occasionally result in marginal changes in properties. CICO aspires to ensure that any
recommendation, advice, test data, specification, method statement and other information given in this product datasheet is accurate
and best of company’s knowledge. Since, the company (CICO TECHNOLOGIES LTD) has no control over the selection of its product,
applicators, application methodology, how and where it is applied, therefore, the company cannot accept any liability directly or
indirectly arising from the use of its product. It is important to any customer, user or specifier satisfies him / herself that the product is
suitable for the intended purpose including health, safety and environmental aspect. Unless or otherwise agreed in writing, all
products of the company are sold strictly pursuant to the terms of our standard conditions of sale which are available upon request.
All information and technical assistance is given without warranty or guarantee and is subject to change without notice. All customers,
users, specifers should ensure that they examine the suitability of the product with company’s latest product data sheet.