Professional Documents
Culture Documents
CEREC Milling Unit Features & Performance - 130130
CEREC Milling Unit Features & Performance - 130130
30.01.2013
CEREC MC CEREC MC X CEREC MC XL CEREC MC XL Premium Package
Performance Value Model – Launch IDS Standard Model – Launch IDS Standard Model - Current High-end Model – Launch IDS
Software >= CEREC SW 4.2 >= CEREC SW 4.2 >= CEREC SW 4.0.3, >= CEREC SW 4.2,
inLab SW not compatible >= inLab SW 4.2 (optional) >= inLab SW 4.0.2 (optional) >= inLab SW 4.2 (standard)
Full CEREC SW (all indications
and materials seen in all
phases, but not all millable
with CEREC MC)
Spindle Motors 2 motors, 2 motors, 2 motors, 4 motors (Design 2011)
not upgradable to 4 not upgradable to 4 not upgradable to 4
Milling Accuracy +/- 25 µ +/- 25 µ +/- 25 µ +/- 25 µ
Milling Times Approximately 40%-50% Similar to MC XL, Similar to MC X, Similar to MC X,
slower than MC X based on Known exceptions: Known exceptions: Known exceptions:
e.max CAD single crown (e.g. TZI, ZI and Temp Materials TZI, ZI and Temp Materials are ~ TZI, ZI and Temp Materials
~ 15-18 minutes for a 10 min. are ~ 25% slower, 25% faster are ~ 25% faster
crown with MC X) Some Fast Milling cases noted Some Fast Milling cases noted Some Fast Milling cases noted
where MC X is faster where MC XL is slower where MC XL is slower
Milling Options Normal Milling, Normal Milling, Fast Milling, Normal Milling, Fast Milling, Normal Milling, Fast Milling,
Veneer Mode 2-Step Milling, Veneer Mode 2-Step Milling, Veneer Mode 2-Step Milling, Veneer Mode
Stack Milling No Optional with inLab SW if milled Optional with inLab SW Standard with inLab SW
with <= 40 mm blocks milled with all block sizes milled with all block sizes
Milling (Fräsen) Possible when in CEREC SW, Possible when in CEREC SW or Possible when in CEREC SW Possible when in CEREC SW
only for TZI crowns optional inLab SW 4.2.1 for or in optional inLab SW 4.2.1 for or in standard inLab SW 4.2.1
composites and TZI <=40 mm all block sizes for all block sizes
MC Upgradable No N.A. N.A. N.A.
Max. Block size 15,5 x 19 x 20 mm3 15,5 x 19 x 40 mm3 22 x 40 x 85 mm3 22 x 40 x 85 mm3