Professional Documents
Culture Documents
Aim:
To print a 3d model of liziard .stl file to g code in ulitimate maker and also using FDM process.
Software Requirements:
Ultimaker cura.
Procedure:
>> First we need a digital model which is needed to be printed in the 3rd printing mission.
>>The digital model should be in form of .stl file and it should be converted into g code to get
. the 3d print output.
>>first the digital model should be placed in qura ulitimate maker in the form of .stl file.
>>we need adjust the diamansion as per required in the software.
>>After adjusting the diamansions we need to adjust the axis of the model.
>>we need to slice the dital model after getting the output.
Fig.1-Top view
Fig.2-Angular view
Cura Parameters:
Final output
EXPERIMENT REPORT
(All steps clearly stated)
OBSERVATIONS AND DATA 15
TOTAL 20