Professional Documents
Culture Documents
-> Perform “1. Verification upon Unpacking” in the annexed “DR-ID300CL V10.0 Product Inspection
Procedure Guideline (600G2)”.
2) Take out the PC, the keyboard, the mouse, and the power cord.
3) Set up the keyboard, and the mouse with the PC.
4) Connect the “DisplayPort to DVI Video Adapter cable” to the right side of the Display Port located
behind the PC panel, and a display is connected to a DVI connector. (The red frame of the following
figure.)
600G2 SFF :
5) Using a network cable, connect the PC and the jig PC to the HUB.
6) Attach a “Headphone Connector Protection Cap” (317N100145) to the “headphone connector” and
“microphone connector” of the front panel of the PC respectively.
7) Connect the power cord to the PC.
2. Setting BIOS
1) Turn on the PC.
2) Press “F10” key as soon as “hp” is displayed in the center of the screen.
3) The BIOS screen will be displayed. Select “Advanced” tab, and click “Boot Options”.
4) “Boot Options” screen will be displayed. Configure the setting as follows, and click “<-”.
CD-ROM Boot: Uncheck the checkbox
USB Storage Boot: Uncheck the checkbox
Network (PXE) Boot: Uncheck the checkbox
Legacy Boot Order: Uncheck the checkbox (Or should be grayed out)
5) Click “Secure Boot Configuration” in “Advanced” tab.
6) “Secure Boot Configuration” screen will be displayed. Configure the setting as follows, and click
“<-”.
1
Configure Legacy Support and Secure Boot: Select “Legacy Support Disable and
Secure Boot Disable”
7) Click “Built-In Device Options” in “Advanced” tab.
8) “Built-In device Options” screen will be displayed. Configure the setting as follows, and click “<-”.
Wake On LAN: Select “Boot to Hard Drive”
9) Click “Power Management Options” in “Advanced” tab.
10) “Power Management Options” screen will be displayed. Configure the setting as follows, and click
“<-”.
PCI Express Power Management: Uncheck the checkbox
11) Click “Remote Management Options” in “Advanced” tab.
12) “Remote Management Options” screen will be displayed. Configure the setting as follows, and click
“Exit”.
Active Management (AMT): Uncheck the checkbox
13) “Save Changes?” screen will be displayed. Click “Yes”.
14) The PC will be restarted.
15) If “Secure boot.” screen will be displayed. Enter the displayed 4-digit number and then press
“Enter”.
3. Starting Windows 10
1) After a while, “Here’s the legal stuff” screen will be displayed. Click “Accept”.
2) “Get going fast” screen will be displayed. Click “Use Express settings”.
3) A login screen for “Administrator” will be displayed. Enter “fcr-iip” for “Password” and then press
“ENTER”.
-> Perform “2. Verifying BIOS” in the annexed “DR-ID300CL V10.0 Product Inspection Procedure Guideline
(600G2)”.
2
Healthy (Primary Partition)
10) Right click “Unallocated” on the right area of “(C:)” and then select “New Simple Volume” from
the menu shown.
11) “Welcome to the New Simple Volume Wizard” dialog box will be displayed. Click “Next”.
12) “Specify Volume Size” dialog box will be displayed. Set “Simple volume size in MB” to the
maximum disk space size and click “Next”.
13) “Assign Drive Letter or Path” dialog box will be displayed. Confirm that “Assign the following drive
letter” has been selected.
14) Select “I” from pull-down menu, and then click “Next”.
15) “Format Partition” dialog box will be displayed. Select “Format this volume with the following
settings”, and then configure the settings as follows:
File System: NTFS
Allocation unit size: Default
Volume label: Image
Check the checkbox for “Perform a quick format”
Uncheck the checkbox for “Enable file and folder compression”
16) “Completing the New Simple Volume Wizard” dialog box will be displayed. Click “Finish”.
17) Confirm that the following is displayed in the right side of “(C:)”.
Image (I:)
“Approx. 330” GB NTFS
Healthy (Primary Partition)
-> Perform “3. Verification of Device Manager” and “4.Checking Hard Disk” in the annexed “DR-ID300CL
V10.0 Product Inspection Procedure Guideline (600G2)”.
3
5) Close “Device Manager” window.
6. Setting Display
1) Click “Display” in “All Control Panel Item” window.
2) “Display” window will be displayed. Click “Adjust resolution”.
3) “Change the appearance of your display” window will be displayed. Click “Advanced Settings”.
4) “Plug and Play Monitor and…” dialog box will be displayed. Click “List All Modes” on the
“Adapter” tab.
5) “List All Modes” dialog box will be displayed. Select “1280 by 1024, True Color (32bit), 60Hertz”
and click “OK”.
6) Click “OK” in “Plug and Play Monitor and…” dialog box.
7) Click “OK” in “Change the appearance of your display” dialog box.
8) Click “<- (Back to ~)” located in the upper left of “Display” window, and then return to “All Control
Panel Item” window.
7. Setting Sound
1) Click “Sound” in “All Control Panel Item” window.
2) “Sound” dialog box will be displayed. Select “Speakers (Default Device)” on the “Playback” tab
and click “Properties”.
3) “Speakers Properties” dialog box will be displayed. Drag the slider of “Realtek HD Audio output” on
the “Levels” tab to the right (100%).
4) Click “OK” in “Speakers Properties” dialog box.
5) Click “OK” in “Sound” dialog box.
4
-Device software
-Windows Troubleshooting
-HomeGroup
-File History
-Storage Spaces
-Work Folders
4) Close “Security and Maintenance” window.
9. Setting Taskbar
1) Right-click three icons located in the right side of the “Windows” button on the Taskbar and select
“Unpin from taskbar” from the menu shown.
5
Microsoft Messaging
Get Skype
Sway
App connecter
Sports
News
Money
Phone Companion
Get Office
5) Click “Default apps” on the left pane.
6) “Default apps” window will be displayed. Click “Photo viewer” and then select “Paint” from the
menu shown.
7) “Before you switch” dialog box will be displayed. Click “Switch anyway”.
8) Click “Web browser” and then select “Internet Explorer” from the menu shown.
9) “Before you switch” dialog box will be displayed. Click “Switch anyway”.
10) Click “Choose default apps by file type”.
11) “CHOOSE DEFAULT APPS BY FILE TYPE” window will be displayed.
12) Click “Microsoft Edge” icon on the right area of “.pdf”.
13) Select “Adobe Reader” from the menu shown.
14) Click “<-” located in the upper left of “CHOOSE DEFAULT APPS BY FILE TYPE” window, and then
return to “SYSTEM” window.
15) Click “About” on the left pane.
16) Click “Rename PC”.
17) “Rename your PC” dialog box will be displayed. Enter “DAxxxxxxxx” (“DA” in capital letters;
enter the last eight digits of Serial Number for “xxxxxxxx”) and click “Next”.
18) “After you restart, your PC name will change to: DAxxxxxxxx” message will be displayed. Click
“Restart now”.
19) The PC will be restarted.
20) As a login screen for “Administrator” is displayed, enter “fcr-iip” for “Password” and then press
“Enter“.
6
9) “Contacts” window will be displayed.
10) The item of everything is established “Off”.
11) Click “Feedback & diagnostics” on the left pane.
12) “Feedback frequency” window will be displayed.
13) Select “Basic” from pull-down menu of “Send your device data to Microsoft”.
14) Click “Background apps” on the left pane.
15) “Background apps” window will be displayed.
16) The item of everything is established “Off”.
17) Click “<-” located in the upper left of “PRIVACY” window, and then return to “Settings” window.
7
3) “Windows Features” dialog box will be displayed. Check the checkboxes for the following items, and
then click “OK”.
* For those without any explanation, leave as default state.
* = Install = Install partially
- Internet Information Service
- FTP Server
- FTP Extensibility
- FTP Service
- Web Management Tools
- IIS 6 Management Compatibility
- IIS 6 Management Console
- IIS 6 Scripting Tools
- IIS 6 WMI Compatibility
- IIS Metabase and IIS 6 configuration compatibility
- IIS Management Console
- IIS Management Scripts and Tools
- IIS Management Service
- Telnet Client
4) “Windows completed the requested changes.” dialog box will be displayed. Click “Close”.
5) Click “<- (Back to ~)” located in the upper left of “Programs and Features” window, and return to
“All Control Panel Item” window.
8
3) “Windows Firewall with Advanced Security” window will be displayed. Click “Inbound Rules” on
the left pane.
4) Right-click “FTP Server Passive (FTP Passive Traffic-In)” from the list that appears in the center
pane and select “Enable Rule” from the menu shown.
5) Close “Windows Firewall with Advanced Security” window.
6) Click “<- (Back to ~)” located in the upper left of “Windows Firewall” window and go back to “All
Control Panel Item” window.
-> Perform “5. Setup Input Verification” described in the annexed “DR-ID300CL V10.0 Product Inspection
Procedure Guideline (600G2)”.
9
“->”.
3) After a desktop screen is displayed, it waits for 3 minutes.
4) Insert “DR-ID300CL Application Software V10.0 DVD (114Y2150001L02)” (a DVD included in the
package upon shipment) into the DVD drive of the PC.
5) Click “Tap to choose what happens with this disk” message will be displayed on lower right of the
Desktop.
6) “Choose what to do with this disc.” Dialog box will be displayed. Click “Run Setup.bat”.
7) Setup Menu will be displayed.
8) Enter “1” and press the “ENTER” key. (Install Database Management System)
9) Enter “1” and press the “ENTER” key. (SQL Server 2012 Express Edition SP2)
* If “Installation Failed.” is displayed and the screen returns to Setup Menu, the installation
failed. In this case, perform the steps from step 6) again.
* If re-installing is performed five times and the installation still fails, perform “2. Win10 Image
Recovery” and the subsequent steps again.
10) If “Please reboot the system. And select 1) menu again.” and “Press any key to continue...” appear,
restarting the system is required while SQL Server 2012 is being installed. In this case, perform the
following steps. (May be required several times.)
i Press any key to go back to the setup menu.
ii Enter “0” and press the “Enter” key. (Quit)
iii Repeat from step 1).
iv If the installation is completed, perform step 12) or later because step 11) is not displayed.
11) “Press any key...” will be displayed. Press an arbitrary key.
12) On Setup Menu, enter “0”, press the “ENTER” key, and then close the Setup Menu. (Quit)
13) Eject the DVD from the DVD drive.
14) Restart the PC.
10
11) “Welcome to the Risiip Installation Program” dialog box will be displayed. Click “OK”.
12) “Begin the installation by clicking the button below.” dialog box will be displayed. Click “Change
Directory”.
13) “Change Directory” dialog box will be displayed. Clear the default path displayed in “Path”,
manually enter “C:¥Program Files¥Risiip” for “Path”, and then click “OK”.
14) “Risiip Setup” dialog box will be displayed. Click “Yes”.
15) Click “Setup Button (PC icon button)” on “Begin the installation by clicking the button below.”
dialog box.
16) “Risiip - Choose Program Group” dialog box will be displayed. Click “Continue” while “Risiip” is
being selected (as in the default state).
17) “Risiip” setup will start.
(I) If “The Destination File is in-Use” message is displayed, click “Ignore”. Then, click “Yes” on
“ignore error?” dialog box.
(II) Click “Yes” for all on “Version Conflict” dialog box.
(III) If “An error occurred while ~” message is displayed, click “Ignore”.
18) “Risiip Setup was completed successfully” dialog box will be displayed. Click “OK”.
19) On Setup Menu, enter “0”, press ENTER key, and then close command prompt.
20) Enter “D:¥tools¥AssocDataFolder¥AssocDataFolder (.bat)” for “Start” > “Search programs and
files” column and then press “ENTER”.
21) Command prompt will be displayed.
22) “Press any key to continue…” will be displayed. Confirm that “PartitionDividedTool Successed.” is
displayed one line above, and then press an arbitrary key.
23) Eject the DVD from the DVD drive.
-> Perform “6. Verification of Standard Option Software Installation” in the annexed “DR-ID300CL V8.0 1
Product Inspection Procedure Guideline (600G2)”.
11
23. Installing ServicePack / HotFix
1) Insert “DR-ID300CL Application Software HF0001 (Base: V10.0)” CD (114Y2150816B00) into the
jig DVD drive.
2) “DVD RW Drive (D:)” window will be displayed. Double click “114Y2150816B00 (.zip)”.
3) “114Y2150816B00” folder will be displayed. Select the folder and copy it just under “C:¥”.
NOTE: This copy operation must be executed on Explorer.
* If you execute “Extract All…” from the right-click menu of the zip file, instead of copying on
Explorer, you will not be able to decompress the necessary files, and the installation will fail.
4) On Explorer, execute “Setup.bat” in “C:¥114Y2150816B00” folder.
5) Main Menu will be displayed. Enter “1” and press ENTER key. (Install Hotfix 0001 (Base: V10.0))
6) Once the installation has been completed, Main Menu will be displayed again. Enter “0” and press
“ENTER” key. (Quit)
7) Eject the CD from the jig DVD drive.
8) Click “<- Back” on “C:¥114Y2150816B00” window to return to “Local Disk (C:)”.
9) Select “114Y2150816B00” folder, and hold down “Shift” key and press “Delete” key.
10) “Delete Folder” dialog box will be displayed. Click “Yes”.
11) Close “Local Disk (C:)” window.
After the power went off, perform “7. Checking Serial Port” and the rest of the operations described in
the annexed document, “DR-ID300CL V10.0 Product Inspection Procedure Guideline (600G2)”.
12
Appendix: If the purchased PC (with image development through HP Configuration & Deployment
Services) fails the setup or the backup media included with shipment is damaged on the installed PC, the
steps below must be followed to restore HP to factory default.
* “600G2/800G2 Win 10 EN Master Image Disk V1.0 (114Y2150311B00)” is only available to service
engineers. Handle it accordingly.
* Distributing “600G2/800G2 Win 10 EN Master Image Disk V1.0 (114Y2150311B00)” to end users
must not be allowed.
13