TNB-CIRED-ACEM
07" 0cT2021
8.50am-10.30am
Insulation
Coordination for Bare
Overhead Line System
By definition, according to IEC 71-1, insulation coordination is ‘the
selection of the dieleettle strength of equipment in relation to the
voltages which can appear on the system for which the equipment is.
intended and taking into account the service environment and the
characteristics of the available protective devices’. The basic principle
of insulation coordination is to select the insulation strength and
protective device for an insulation system such that the protective level
of the insulation is always below the withstand level of the device to be
protected with a safe margin.
This webinar session will focus on insulation coordination practices for
My bare overhead distribution lines. Moreover, this session will provide
some guides to estimate the performance of MV bare overhead lines
under the local lightning activities.
Key. Takeaway
There are two major factors that need to be considered in
order to implement an insulation coordination strategy:
+ Understanding of the different types of overvoltage that are
found on the power system that the equipment encounters in
+ General assessment of the insulation performance in terms of
the number of failures when subjected to the stresses due to
these overvoltage.
Tdi
TPA hclere- Gig
PEPC, P-Tech, MIEM, MEE (UNITEN)
eee Diagnostic)
Ss
erin
eam
=