Professional Documents
Culture Documents
High Chief Manual
High Chief Manual
GREASE PUMP
High Chief Models 03-000920, 03-000921, 03-000950,
03-000955, 03-000955, 03-000964
Revision 3.1, Nov 2007
PART NUMBER: 03-000920, 03-000921 for 20kg pail
03-000950, 03-000951 for 60kg drum
03-000954, 03-000955 for 180kg drum
03-000964 for mini drums
SPECIFICATION: Supply Inlet Pressure: 20-200bar
Hydraulic Inlet Flow: 0.25-3.0L/m
Output Pressure: 300 bar
0 0
Operating Temp: -10 C to +60 C
Operating Voltage: 24VDC
Hydraulic Inlet Port: 7/16” JIC
Tank Return Port: 9/16” JIC
Pump Outlets: ¼” NPT
0
Max. Hyd. Fluid Temp: 98 C
3
Output per cycle: 8.8cm /cycle
3
FACTORY SETTINGS: Output: 132cm /minute
NOTE:
THE THEORETICAL RATIO OF THIS PUMP IS 15:1
DEPENDANT ON THE APPLICATION AND
VARIABLE INTERNAL FRICTION; THE ACTUAL FIGURE 2 – PUMP
RATIO MAY BE LESS. MOTOR CIRCUIT
01-031050
01-034572
03-016576
01-034572
03-38165V
03-0185-5707
01-048213
01-011349
USE LOCKTITE 510
GASKET ELIMINATOR
ON THREADS
01-031048
IMPORTANT
START FASTENERS BY HAND
PUMP TO AVOID STRIPPING
TUBE
01-057027
01-066010
PISTON
ROD
01-061407
A 01-011346
01-011345
01-090554
01-057027
01-011344 01-066010
01-31047
01-011726
01-011723
01-011722
01-031049 01-035073
01-011340 01-011702
01-012333
01-011721
01-011725
01-061273 01-011724
01-061275
TORQUE SPECIFICATIONS
1 14 Nm 4 108 Nm
2 41 Nm 5 122 Nm
3 61 Nm 6 136 Nm
PARTS LIST
Figure AA
HIGH CHIEF PUMP HIGH CHIEF PUMP – COMPLETE TIMER “G2” TIMER 5 METRE
– NO TIMER WITH “G2” TIMER WITH 5M CABLE ONLY CABLE ONLY
03-000921 03-000921-T 13-002500 13-002500-1 13-002500-2
03-000951 03-000951-T 13-002500 13-002500-1 13-002500-2
03-000955 03-000955-T 13-002500 13-002500-1 13-002500-2
Note: Models 03-000920, 03-000950, 03-000954 come fitted with a reciprocating timer 03-000014
For more technical detail on the JSG “G2” timer please refer to the “G2” manual.
Product Warranty
JSG Industrial Systems Pty Ltd (hereinafter called “JSG”) warrants that all products marketed by
JSG will be free from defects in material and workmanship during one (1) year period following
the date of purchase. If the equipment is deemed to be defective during this warranty
period, it will be repaired or replaced without charge, providing examination proved the
equipment to be defective. To obtain repair or replacement if must be shipped
”transportation charges prepaid”, with proof of date of purchase, to either JSG or one of its
authorised Service Centres within one (1) year following the date of purchase.
This warrant is extended to the original retail purchaser only. This warranty does not apply to
equipment damaged by accident, overload, abuse, misuse, negligence, faulty installation or
abrasive or corrosive materials, or to equipment repaired or altered by anyone not authorised
by JSG to repair to alter the equipment. This warranty applies only to equipment specified,
approved installed and operated according to the recommendations of JSG. No other
express warranty applies to lubrication equipment, material dispensing equipment, hose and
cable management equipment, or other related equipment supplied by JSG.
In no event shall JSG be liable for incidental or consequential damages. The liability of JSG on
any claim for loss or damage arising out of the sale, resale, or use of lubrication equipment,
material dispensing equipment, hose and cable management equipment, or other related
equipment shall in no event exceed the purchase price.