WOOLLEY )_
DRILL PIPE SLIPS
£12" XL Slip Complete
ee
X-LONG — 4-4/2" BODY SIZE — 16” GRIPPING LENGTH
Slips complete, Less inserts...
Part No. 738-344-0100... (Wt. 173 Ibs.)
Fits Pipe Sizes 3-1/2, 4", and 4-1/2"
BODY : >
[ter | 737-348-0300] St lbs. | —
[7 Right 4a-0a00 | stibs. | —
Genter | 737-344-0200 {54 tbs. [ —
COMPONENT PARTS FOR X-LONG — 4-1/2"
6" GRIPPING LENGTH
mY
oes
X-Long — 4-1/2" Drill Pipe Slip
SPECIFICALLY FOR DEEP DRILLING, this slip has
proven its ability to hold true alignment under
loads exceeding 22,000 feet of pipe. It is de-
signed for API pin-type rotary drives and
extended-taper bowls in the master bushing.
To prevent misalignment and possible “bottle-
necking” of the pipe, this member of the Wool-
ley Type "8" family features a greatly-expanded
support area in the slip back. It also provides
greater insert-area support than other slips.
The "X Long” offers all the same construction
features and advantages of other Type “8” Slips.
INSERT REPLACEMENT requires only the removal
of a single retaining pin.
parT | PARTNO. | WEIGHT | *
Handles: Left_| 737-000-0700 | 4 bs. 1 Left enter Right
Right 737-000-0701 | 4 Ibs, 1
Center 737-000-0800 | _4lbs. | 1 INSERTS — FOR X-LONG SLIPS ONLY —
Handle Pins, 737-000-1000 | 1/2 Ib. 3 Acai BODY. SIZE.
Hinge Pins | 737-344-0500 | 116. | 2 JNSEHISEE! POSING WEIGHT ORS
Insert yar-000100 | 120. | 6 | for. 4-12" pipe [757-084-0384 | 1.4:tes | 1120
Retainer Pins " = for 4” pipe | 757-044-0340 | 1.8 Ibs. | 120
Cotter Pins | 117-005-0000| _— [12 for 3-172 pipe _| 757-024-0334 | 2.2 tbs. | 120 |
“suggested spare pars for 1 yerr operation
Handles: Late
center
t 1
| | cotter Pin
XLinser.
xLEandie
Retainer XLInsertRetainerv (WoeetEY)
DRILL PIPE SLIPS j
os ey
Type B Short 4-1/2" Drill Pipe Slip
MAXIMUM SERVICE LIFE is inherent in this slip’s,
ability to absorb punishment, thanks to a unique
Torque-Transfer Insert Slot. To reduce wear and
excess pressures, inserts are designed with flat
backs. All torque is transferred directly to the
slip body, preventing wear on the insert slot . ..
stretching the life of your slip and reducing the
danger of losing inserts in the hole.
SUPERIOR CONSTRUCTION in such features as
internal web trussing and box-type design make
this a slip that will not cave or get out of taper.
With unitized design and flattened body-
segment toes, Woolley Slips stand solidly on the
412° BShortSlipomplete rotary table ‘or rig floor, Double-constructed
handles sit well within the body, held by handle-
InoRt Laie Goby SEP LID GAPPNG LENGTH] Tetsining pins which can't bend because they
SHORT — 4172" BODY SIZE — 12" GRIPPING LENGTH) bear no weight. This slip is recommended for
Slips complete, Less inserts drill strings t0 8,000".
Part No. 738-144-0100... (Wt. 174 Ibs)
Fits Pipe Sizes 2.3/8", 2-7/8", 3-1/2", 4", and @1/2"_| INSERT REPLACEMENT requires only the removal
| Bor aT | wegur | = | of single retaining pin,
— left | 737-144-0300 | ai lbs | —
Right [_ 737-144-0400. | 31 Ibs. | —
enter | _ 737-144-0200 | 32 Ibs. | —
COMPONENT PARTS FOR ALL TYPE “B” SLIPS
paRT | _PARTNO. | WEIGHT | *
Handles: Left | 737-000-0100 4 Ibs, 1 coed
| — fete —araeegse) |e tes INSERTS - FOR 4-1/2" TYPE "B” SLIPS
om . INSERT SIZE | PARTNO. | WEIGHT] *
|_-andle Pins |" 737-000-0400 | valb._| 3 Ea ia oral WeSiGMeGTaN| Tins aaah
Hinge Pins | 737-000-0500 Ti, 2] [SEE wipes ORO | ibs ohetzd |
ier for 4" pipe | 757-044-0140 | 1.5 ibs. | 120
Retainer Pins_| 737-000-0600 | 1/4 Ib. for 3-1/2" pipe__| 757-044-0134 | 1.7 Ibs. |_120)
Cotter Pins | 117-005-0400 care] for 2-7/8" pipe_| 757-048-0127 | 2.0 Ibs. | 120
“Suggested spare parts for one year aperation for 2-3/8" pipe _| 757-044-0123 | 2.5 Ibs. | 120
| Coster Fin
See THN
i ,
& :
Handle Insert
Handles: Lett center ight Retainer Retainer
Type B insert
Hinge Pinv DRILL COLLAR SLIPS
‘Type A ll Collar Slip Complete
DRILL COLLAR SLIPS COMPLETE
WITH INSERTS.
| PRLECOUAR ] paar WEIGHT
[Foe | 708300.0100_| 1361
| 34a" to 4-3/4" [708-320-0100 | _ 128 Ibs.
4-1/4 105-314" | 709-420-0100 12 Ibs.
S:12"to7) | 709-540-0100 117 Ibs.
6-3/4 to 8-1/4" | 709-660-0100 118 lbs.
[ev4*t0 10" 708-820-0100 120 Ibs.
center
(WOOLLEY ).
‘Type A Drill Collar Slips
EXTRA BODY STRENGTH — Alloy steel body seg-
ments are trussed for unyielding support.
INSERT REPLACEMENT requires only the removal
of a single retaining pin. (Figure 1)
MAXIMUM GRIP —Three-piece inserts _ level
themselves readily to insure a complete gripping
action. Dimensions are carefully calculated to
prevent distortion in manufacturing and to
assure easy insertion and removal.
SIX SIZE RANGES — Slips are available in six size
ranges. Each slip adjusts automatically to fit all
drill collars within its size range.
NO INSERT LOSS — Dovetail construction elimi
nates the possibility of losing inserts in the hole.
Heat treated for extreme hardness and strength,
inserts are machine sharpened to prolong supe-
rior gripping efficiency.
7
ut centr
inser Reiner
Biijoog,
singe Pn
t ype nner
Mande Retainer(Qvoottey)
. fea
CASING SLIPS | aa.
TYPE € CASING SLIPS COMPONENT PARTS. |
7 | COTTER | RENEW. COTTER
| HINGE | Hanois | PivFoR | ABLE
CASING |__PiN RETAINER | “ORF” | _ INSERT
size | mem | 2 i F I Gc tH [ J I K
PART NO. |707-000-0100,707-000-0200,707-000-0300|117-005-0400|717-700-0570|707-000-0600|117-005-0200| «
: # 7 3 3 10 2 | 8 8
v2 ib. 2ibs, | 1a tb. — 15 Ib. Wale, fo =
: 7 | 3 3 35 8 16
PART NO, |{707-000-0709)707-000-0200}707-000-0500 117-005-0400)717-700-0595 707-000-C800)117-005-0209
758" NO.REQ. | 7 3 3) UL 10 32 8 8
WEIGHT | 1/2 Ib 2 ibs, vai, | 131b, A Io, —
|e by 3 3° | 0 36 8 5
PART NO. |707-000-0100'707-000-0200|707-000-0300)1 17-005-0400)717-700-0585} j117-005-0200}
ese | NORO. 7 3 3 1 5 8
PME? | ade | ake | de a 2
L Lo z 3 3 10 8 16
ART NO. 767-G00-0100/707-200-0200707-006 6300 17-005-6400/717-700-0595 767-00.0600 117-005-0209
$598" | NO. REQ. 3 3 W 3% | OS 8
1 WeiGkT | 12. 2 ibs. V4 tb. - Sib, | Nab, =
l {os | 7 a | 3 un | toe | 8 18
| PART NO. [707-000-0100)707-000-0200)707-000-0300)117-008-0400)717-700-5108 707-000-6800 117-005-0200}
1033/4" | NO. {8 3 3 | it 36 5 | 9
\ | WeichT | 12 tb. 2 Ios. Watb = Tio. ait. -
| : a | 3 3 u 108, 3 18
i T BART NO. 77600-0100 767-600-6200 707-000-306| {17-05-0400 717-700-5116 707-000-600 17-05-0200
waa" | NO. REQ | 10 4 4 wae " n
| weishT | 14 Ib. 2ibs. | M4 Io. = 14 bb. Valb, |
ad a | oa wm | ea ke
j ii "707-000-6200 707-000-0306 117-605-0406 717-760-5133 767-000-0606 117-005-6260]
13-318" | NOLREQ. | | 4 4 4a | 48 fat ; oo
| weichT | 2ibs. 6 tb. = | Tb Wht |
| 4 4 | 12 no} 2
PAaT WO. ['67-000-01001707-000-0200)707-000-0300|117-005-0400 717-700-5160,707-606-0606)117-005-0200
16° | NO. REC. 2 4 a | 16 s2 | 13 |
weight | v2 tb 2 Ibs 7 a ait | if
. 12 4 ai 6 | tse |
| PAST AQ” [707-092-0180 76700-0209 797 -00-026] 17-405 Ga00 77700-5185 707-000-0605 7-605 cRen
185" | NO. REQ 4 a |? | 14
2 Ibs. tid tb, Py dts | omis _
L ~ Ff 4 4 7 | tee | te
PART NO. 797-€06 6260767 c00 0350 17-05-0800 717-7005200/0-C00-600 17-05-0209
20 | NO. REG roe | fa | 46 6
WEIGHT 2 tb ui } = Sip, | 18,
: e a} ig i |
"Suggested soere parts for one veer operation/CASING SLIPS a.
Type C Casing Slips
The same features of Woolley Type-A slips may
be found in these casing slips: light-weight truss-
type construction; self-centering, full-circle grip
to prevent damage to thin-wall tubulers; remov-
able inserts with a generous 30° bevel to mini-
mize any danger of loss in the hole
Slips are tapered to fit A.PI. master bushings.
Varying inserts sizes plus the simple addition or
removal of body segments make it easy to pro-
vide a fit for any pipe size from 7” through 20”
OD. casing
Type-C casing slips require a different size insert
to fit the various casing OD's within each of the
first three size ranges:
7” to 8-5/8" 0.D. CASING
9-5/8" to 10-3/4" O.D. CASING
11-3/4" to 13-3/8" 0.D. CASING
16" 0.D. CASING
18-5/8" O.D. CASING
20" 0.D. CASING
NO INSERT LOSS — Dovetail construction elimi-
nates the possibility of losing inserts in the hole.
“TyPs C CASING SLIPS Heat treated for extreme hardness and strength,
COMPLETE WITH INSERTS inserts are machine sharpened to prolong supe-
SRE RT) wea] rior gripping efficiency.
ane | WEIGHT .
2 ~ epee nth ttt INSERT REPLACEMENT recuires only the removal
z 748-700-0170 | 160 bs. of a single retaining pin. (Figure 2)
718-700-0175 | __ 160 Ibs.
719-700-0185 | 160 Ibs. =
i | 719-700-0195 | 182 Ibs. a
10-314" 719-700-1106 | _182 Ibs. ils
Ey ICE [218s i
33a [218 Ibs, i
a | 259 Ibs. oor
165 85_| 278 Ibs. ee
20" 718-700-1200 | 317 Ibs. °
| contin
ON CN ZW as
Cee Cae eS i Insert Retainer “2
} . ees)
Handles: inte Center Right Hl ‘Type Cinsert
[) Hanate Retainer
Hiogerin Jb