Professional Documents
Culture Documents
Hydraulic Excavator: Engine Drive
Hydraulic Excavator: Engine Drive
Hydraulic Excavator
Engine Drive
Engine Model Cat® C9.3 (ATAAC) Maximum Travel Speed 4.8 km/h 3 mph
Net Power – SAE J1349 226 kW 303 hp Maximum Drawbar Pull 294 kN 66,139 lbf
Weight
Minimum Weight 36 500 kg 80,500 lb
Maximum Weight 40 100 kg 88,400 lb
Introduction
Contents
Hydraulics ............................................................3
Operator Station..................................................4
Engine ...................................................................6
Attachments.......................................................10
Serviceability .....................................................13
Safety ..................................................................14
Sustainability .....................................................16
Specifications ....................................................17
Optional Equipment...........................................34
Notes...................................................................35
2
A Powerful, Efficient Design
When it comes to moving heavy
material quickly and efficiently, you
need hydraulic horsepower – the type
of ground-breaking power the 336F can
deliver. Major hydraulic components
like pumps and valves are located close
together so shorter tubes and lines
can be used. This design leads to less
friction loss, reduced pressure drops,
and more power to the ground for the
work you need to get done.
Hydraulics
Power to move your material with speed and precision
3
Operator Station
Comfort and convenience to keep you productive
A Helpful Monitor
The LCD monitor is easy to see and navigate.
Programmable in up to 42 languages to meet today’s
diverse workforce, the monitor clearly displays
critical information you need to operate efficiently and
effectively. Plus it projects the image from the standard
rearview camera to help you see what’s going on around
you so you can stay safely focused on the job at hand.
A Safe, Quiet Cab A Cool & Warm Environment Ample Storage & Auxiliary Power
The ROPS cab provides you with a safe The automatic climate control system Storage spaces are located in the front,
working environment. It also contributes features multiple air outlets with filtered rear, and side consoles of the cab. A drink
to your comfort because it’s attached ventilation. Air flows on the floor, behind holder accommodates a large mug with
to a reinforced frame with special the seat, and in front of you to make your handle, and a shelf behind the seat stores
viscous mounts that limit vibration and work in either hot or cold weather much large lunch or toolboxes. Two 12-volt
unnecessary sound. Add in special roof more pleasant and productive. power supply sockets are conveniently
lining and sealing and you have a cab located near the key storage areas for
that’s as quiet inside as any of today’s Controls Just For You charging your electronic devices like an
top pickup trucks. The right and left joystick consoles can MP3 player, a cell phone, or a tablet.
be adjusted to improve your comfort and
Comfortable Seat Options productivity during the course of a day.
The seat range includes air suspension, Also, the right joystick features a button
heated, and air cooled options. All seats that will reduce engine speed when
include a reclining back, upper and lower you are not working to help save fuel.
slide adjustments, and height and tilt Touch it once and speed reduces; touch
angle adjustments to meet your needs it again and speed increases for normal
for maximum comfort. operation.
5
Engine
Powerful and fuel efficient to meet your expectations
Proven Technology
Every U.S. EPA Tier 4 Final ACERT™ engine is equipped with a combination of proven electronic, fuel, air, and aftertreatment
components. Applying these time-tested technologies lets us meet your high expectations for productivity, fuel efficiency,
reliability, and service life. Following are the results you can expect:
• Improved fluid efficiency of up to 5% over Tier 4 Interim products, including Diesel Exhaust Fluid (DEF) consumption.
• High performance across a variety of applications.
• Enhanced reliability through commonality and simplicity of design.
• Maximized uptime and reduced cost with world-class Cat dealer support.
• Minimized impact on emission systems – with no operator interaction required.
• Durability with long service life.
• Better fuel economy with minimized maintenance costs.
• Same great power and response.
6
More Powerful, Reliable Cat NOx Reduction System An Emissions Solution
Engine Electronics The Cat NOx Reduction System captures That Really Works
The electronics used in Cat Tier 4 Final and cools a small quantity of exhaust gas, The Cat C9.3 engine meets today’s
engines are more powerful and robust then routes it back into the combustion U.S. EPA Tier 4 Final emission standards,
than ever. Enhanced features like an chamber where it drives down combustion and it does so without interrupting your
over-foam wiring harness improve your temperatures and reduces NOx emissions. job process. Simply turn the engine on and
experience and increase quality and The result of more than a decade of go to work. It will look for opportunities
reliability through the most demanding Caterpillar engineering research into this in your work cycle to regenerate itself,
applications. technology is the most reliable system and it will give you plenty of power
of its type. for the task at hand – all to help keep
Next Generation Fuel Systems your owning and operating costs to
As a key component of Cat Tier 4 Aftertreatment Technologies an absolute minimum.
Technology, injection timing precisely Caterpillar designed Tier 4 Interim
controls the fuel injection process products with Tier 4 Final standards Fuel Savers That Add Up
through a series of carefully timed in mind. By planning ahead, we were The 336F consumes less fuel than the
microbursts. This injection timing able to minimize design changes and previous series model, and the automatic
provides more control of combustion deliver the reliability and performance engine speed control contributes by
for the cleanest, most efficient fuel you demand. The aftertreatment solution lowering rpm when the machine doesn’t
burn. To maximize your value, Caterpillar utilized for Tier 4 Final products is the next need it for work. You also have a choice of
engineers specified fuel systems evolutionary step for Cat engines with three power modes – high power, standard
based on the power and performance ACERT Technology. To meet the additional power, and eco mode. Simply change
demands for each engine. The high- 80% reduction in NOx emissions required between modes through the console switch
pressure common rail fuel system by U.S. EPA Tier 4 Final emission standards, panel to meet the work needs in front of
with full electronic injection improves Caterpillar engineers only needed to add you. Collectively, all of these benefits add
precision and control, reducing soot one new system to the already proven up to reduced fuel consumption, reduced
and boosting the engine’s performance. aftertreatment solution in use, Selective exhaust and sound emissions, reduced
Catalytic Reduction (SCR). repair and maintenance costs, and
Innovative Air Management increased engine life for you.
Cat Tier 4 Final engines feature innovative Diesel Exhaust Fluid (DEF)
air management systems that optimize Cat engines equipped with an SCR system A Cool Design For
airflow and enhance power, efficiency, inject DEF into the exhaust to reduce Any Temperature
and reliability. We apply a range of simple, NOx emissions. DEF is a precisely mixed The 336F features a side-by-side cooling
reliable turbocharging solutions based on solution of 32.5% high purity chemical system that allows you to put the machine to
engine size and application. This allows grade urea and 67.5% de-ionized work in extremely hot and cold conditions.
us to match turbo performance to rated water. DEF used in Cat SCR systems The system is completely separated from
output for high productivity, excellent fuel must meet the requirements outlined the engine compartment to reduce noise
efficiency, long life, and low operating in the International Organization for and heat. Plus it features easy-to-clean
costs for you. Standardization (ISO) standard 22241-1. cores and an efficient variable-speed fan.
ISO 22241-1 requirements are met by
many brands of DEF, including those that Biodiesel Not A Problem
carry the AdBlue or API certifications. The C9.3 engine can run on B20 biodiesel
fuel that meets ASTM 6751 standards –
all to give you more potential fuel-saving
flexibility.
7
Structures & Undercarriage
Built to work in your tough, heavy-duty applications
8
Front Linkage
Options to take on your far-reaching
or up-close tasks
Booms & Sticks Three Types Available Sticks are matched to the boom.
The 336F is offered with a range of booms Three types of booms and sticks are offered: Longer sticks are better for when
and sticks. Each is built with internal heavy-duty (HD) reach, extreme service you need to dig deep or load trucks.
baffle plates and stress-relieved for added (ES) reach, and mass excavation (ME). Shorter sticks provide greater breakout
durability, and each undergoes ultrasound force and increase your productivity
9
Attachments
Tools to make you productive and profitable
10
GRAB, SORT, LOAD SWAP TOOLS CUT, CRUSH, BREAK & RIP
Contractors’ Grapples
Hydraulic Hammers
Extreme Duty Buckets
11
Integrated Technologies
Monitor, manage, and enhance your job site operations
Cat Connect makes smart use of technology LINK Technologies GRADE Technologies
and services to improve your job site LINK technologies like Product Link™ GRADE technologies like Cat Grade
efficiency. Using the data from technology- wirelessly connect you to your equipment, Control Depth and Slope combine digital
equipped machines, you’ll get more giving you valuable insight into how design data and in-cab guidance to
information and insight into your equipment your machine or fleet is performing. help you work more productively and
and operations than ever before. The system tracks location, hours, accurately with less rework. Real-time
Cat Connect technologies offer fuel usage, productivity, idle time, and bucket tip positioning and cut and fill
improvements in these key areas: diagnostic codes through the online data on the standard cab monitor guide
VisionLink® interface so you can make you to grade, saving money on fuel and
Equipment Management – timely, fact-based decisions to maximize materials. Easily upgrade to AccuGrade™
increase uptime and reduce efficiency, improve productivity, and when 3D control is required.
operating costs. lower operating costs.
Productivity – monitor
production and manage
job site efficiency.
12
Ground-Level Access
You can reach most routine
maintenance items like fuel and oil
filters, fluid taps, and grease points
from the safety and convenience of
ground level. Not only do compartments
feature wide service doors designed to
help prevent debris entry, but they also
securely latch in place to help make
your service work simpler.
Serviceability
Designed to make your maintenance quick and easy
A Cool Design
The high-ambient cooling system features a fuel-saving
variable-speed fan and a side-by-side-mounted radiator
and oil and air coolers for easy cleaning. Wider clearance
between the two make blowing off debris easy for you,
which can help improve your machine’s reliability and
performance.
A Fresh Idea
When you select ventilation inside the cab, outside air
enters through the fresh air filter. The filter is conveniently
Other Service Benefits located on the side of the cab to make it easy to reach and
The fuel tank’s drain cock makes it easy and simple for you replace, and it is protected by a lockable door that can be
to remove water and sediment during routine maintenance. opened with the engine key.
Plus an integrated fuel level indicator pops up to help you
reduce the possibility of fuel tank overfilling.
13
Safety
Features to help protect you day in and day out
Great Views
Ample glass gives you excellent visibility out front and
to the side, and the standard rearview camera gives you
a clear field of view behind the machine through the cab
monitor. The available split-configuration windshield features
an upper window with handles that make it easy to slide and
store above you and a lower window that can be removed
and stored on the inside wall of the cab. The large skylight
also serves as an emergency exit and provides you with
enhanced overhead visibility.
Smart Lighting
Halogen lights provide plenty of illumination, and the cab
and boom lights can be programmed to stay on for up to
90 seconds after the engine has been turned off to help you
safely exit the machine. Optional High Intensity Discharge
(HID) lights are available for enhanced night-time visibility.
14
Complete Customer Care
Support you can count on
Worldwide Parts Availability Financial Options Just For You Operating Techniques To
Cat dealers utilize a worldwide parts Consider financing options and day- Boost Your Profits
network to maximize your machines’ to-day operating costs. Look at dealer Improving operating techniques can
uptime. Plus they can help you save services that can be included in the boost your profits. Your Cat dealer has
money with Cat remanufactured machine’s cost to yield lower owning videos, literature, and other ideas to help
components. and operating costs over time. you increase productivity. Caterpillar also
offers simulators and certified operator
Advice You Can Trust Support Agreements To training to help maximize the return on
What are the job requirements and Fit Your Needs your investment.
machine attachments? What production Cat dealers offer a variety of customer
is needed? Your Cat dealer can provide support agreements and work with you What’s Best For You Today…
recommendations to help you make the to develop a plan to meet your specific And Tomorrow
right machine choices. needs. These plans can cover the entire Repair, rebuild, or replace? Your Cat dealer
machine, including attachments, to help can help you evaluate the cost involved
protect your investment. so you can make the best choice for
your business.
15
Sustainability
Generations ahead in every way
• The C9.3 ACERT engine meets U.S. EPA Tier 4 Final emission standards.
• The 336F consumes 5% less fluid than 336E, which means more efficiency
and less CO2 emissions.
• The engine has the flexibility of running on either ultra-low-sulfur diesel
(ULSD) fuel with 15 ppm of sulfur or less or biodiesel (B20) fuel blended
with ULSD.
• An overfill indicator rises when the tank is full to help the operator
avoid spilling.
• Quick fill ports with connectors ensure fast, easy, and secure changing
of engine and hydraulic oil.
• The machine is built to be rebuilt with major structures and components
remanufactured to reduce waste and replacement costs.
• The 336F is an efficient, productive machine that’s designed to conserve
our natural resources for generations ahead.
16
336F L Hydraulic Excavator Specifications
Track
Number of Shoes (each side)
Sound Performance
Maximum Pressure – Swing 28 000 kPa 4,061 psi Operator Noise SAE J1166 71 dB(A)
Pilot System – Maximum Flow 29 L/min 8 gal/min • When properly installed and maintained, the cab offered by
Pilot System – Maximum Pressure 4100 kPa 595 psi Caterpillar, when tested with doors and windows closed according
Boom Cylinder – Bore 150 mm 5.9 in to ANSI/SAE J1166, meets OSHA and MSHA requirements for
operator sound exposure limits in effect at time of manufacture.
Boom Cylinder – Stroke 1440 mm 56.7 in
• Hearing protection may be needed when operating with an open
Stick Cylinder – Bore 170 mm 6.7 in operator station and cab (when not properly maintained or doors/
Stick Cylinder – Stroke 1738 mm 68.4 in windows open) for extended periods or in noisy environment.
DB Family Bucket Cylinder – Bore 150 mm 5.9 in
DB Family Bucket Cylinder – Stroke 1151 mm 45.3 in
Standards
TB Family Bucket Cylinder – Bore 160 mm 6.3 in Brakes ISO 10265 2008
TB Family Bucket Cylinder – Stroke 1356 mm 53.4 in Cab/FOGS ISO 10262 1998
Drive
Maximum Travel Speed 4.8 km/h 3 mph
Maximum Drawbar Pull 294 kN 66,139 lbf
17
336F L Hydraulic Excavator Specifications
Dimensions
All dimensions are approximate.
2
3
1 9
10
6
7 4
8 5
Extreme Service and
Heavy Duty Reach Booms Mass Boom
6.50 m (21'4") 6.18 m (20'3")
Stick R3.9DB R3.2DB M2.55TB
(12'10") (10'6") (8'4")
mm (ft) mm (ft) mm (ft)
1 Shipping Height (with Shoe Lug Height) 3660 (12'0") 3510 (11'6") 3600 (11'10")
2 Shipping Length 11 170 (36'8") 11 160 (36'7") 10 890 (35'9")
3 Tail Swing Radius 3470 (11'5") 3470 (11'5") 3470 (11'5")
4 Length to Center of Rollers
Long Undercarriage 4040 (13'3") 4040 (13'3") 4040 (13'3")
5 Track Length
Long Undercarriage 5030 (16'6") 5030 (16'6") 5030 (16'6")
6 Ground Clearance
With Shoe Lug Height 510 (1'8") 510 (1'8") 510 (1'8")
Without Shoe Lug Height 480 (1'7") 480 (1'7") 480 (1'7")
7 Track Gauge
Long Undercarriage 2590 (8'6") 2590 (8'6") 2590 (8'6")
8 Transport Width
Long/Std U/C – 700 mm (28") Shoes 3290 (10'10") 3290 (10'10") 3290 (10'10")
Long/Std U/C – 800 mm (32") Shoes 3390 (11'1") 3390 (11'1") 3390 (11'1")
Long/Std U/C – 850 mm (34") Shoes 3440 (11'3") 3440 (11'3") 3440 (11'3")
9 Cab Height 3150 (10'4") 3150 (10'4") 3150 (10'4")
Cab Height with Top Guard 3360 (11'0") 3360 (11'0") 3360 (11'0")
10 Counterweight Clearance (without Shoe Lug Height) 1220 (4'0") 1220 (4'0") 1220 (4'0")
18
336F L Hydraulic Excavator Specifications
Working Ranges
All dimensions are approximate.
8 8
25 25
7 7
20 6 20 6
5 3 5 3
15 4 15
4 4
4
10 3 10 3
2 2
5 5
1 5 1 5
0 0 0 0
1 2 1 2
5 R3.9DB 5 M2.55TB
2 R3.2DB
2
7
10 3 10 3
6 6
1
4 4
15 1 15
5 5
7
20 6 20 6
7 7
25 25
8 8
30 9 30 9
12 11 10 9 8 7 6 5 4 3 2 1 0 1 Meters 12 11 10 9 8 7 6 5 4 3 2 1 0 1 Meters
40 35 30 25 20 15 10 5 0 Feet 40 35 30 25 20 15 10 5 0 Feet
19
336F L Hydraulic Excavator Specifications
kg lb
Lower Structure (without counterweight and track)
Long Undercarriage 8900 19,600
Upper Structure (without front linkage)
For 6.0 mt (6.6 t) counterweight 9900 21,800
For 7.0 mt (7.7 t) counterweight 10 000 22,000
Counterweight
6.0 mt (6.6 t) 6000 13,200
7.0 mt (7.7 t) 7000 15,400
Boom (includes lines, pins and stick cylinder)
HD Reach Boom – 6.50 m (21'4") 4100 9,000
ES Reach Boom – 6.50 m (21'4") 4300 9,500
Mass Boom – 6.18 m (20'3") 4200 9,300
Stick (includes lines, pins and bucket cylinder)
R3.9DB HD (12'10") 1900 4,200
R3.9DB ES (12'10") 2100 4,600
R3.2DB HD (10'6") 1800 4,000
R3.2DB ES (10'6") 1900 4,200
M2.55TB (8'4") 2100 4,600
Track Shoes (Long)
700 mm (28") triple grouser 4400 9,700
800 mm (32") triple grouser 5100 11,200
850 mm (34") triple grouser 5400 11,900
Quick Coupler 600 1,300
Buckets
DB1536GP-C 342-2192 SAE 2.28 m3 (2.98 yd3) 1500 3,300
TB1676SD 339-3748 SAE 2.41 m3 (3.15 yd3) 2500 5,500
*Base machine includes 75 kg (165 lb) operator weight and 90% fuel weight, and undercarriage with center guard.
20
336F L Hydraulic Excavator Specifications
21
336F L Hydraulic Excavator Specifications
Heavy Duty Reach Boom Lift Capacities – Counterweight: 6.0 mt (6.6 t) – Heavy Lift: On
R3.9DB
5030 mm (16'6")
2590 mm (8'6")
1.5 m/5.0 ft 3.0 m/10.0 ft 4.5 m/15.0 ft 6.0 m/20.0 ft 7.5 m/25.0 ft 9.0 m/30.0 ft
m
ft
ISO 10567
* Indicates that the load is limited by hydraulic lifting capacity rather than tipping load. The above loads are in compliance with hydraulic excavator lift capacity
standard ISO 10567:2007. They do not exceed 87% of hydraulic lifting capacity or 75% of tipping load. Weight of all lifting accessories must be deducted from the
above lifting capacities. Lifting capacities are based on the machine standing on a firm, uniform supporting surface. The use of a work tool attachment point to
handle/lift objects, could affect the machine lift performance.
Lift capacity stays with ±5% for all available track shoes.
Always refer to the appropriate Operation and Maintenance Manual for specific product information.
22
336F L Hydraulic Excavator Specifications
Heavy Duty Reach Boom Lift Capacities – Counterweight: 6.0 mt (6.6 t) – Heavy Lift: On
R3.2DB
5030 mm (16'6")
2590 mm (8'6")
1.5 m/5.0 ft 3.0 m/10.0 ft 4.5 m/15.0 ft 6.0 m/20.0 ft 7.5 m/25.0 ft 9.0 m/30.0 ft
m
ft
ISO 10567
* Indicates that the load is limited by hydraulic lifting capacity rather than tipping load. The above loads are in compliance with hydraulic excavator lift capacity
standard ISO 10567:2007. They do not exceed 87% of hydraulic lifting capacity or 75% of tipping load. Weight of all lifting accessories must be deducted from the
above lifting capacities. Lifting capacities are based on the machine standing on a firm, uniform supporting surface. The use of a work tool attachment point to
handle/lift objects, could affect the machine lift performance.
Lift capacity stays with ±5% for all available track shoes.
Always refer to the appropriate Operation and Maintenance Manual for specific product information.
23
336F L Hydraulic Excavator Specifications
Heavy Duty Reach Boom Lift Capacities – Counterweight: 6.0 mt (6.6 t) – Heavy Lift: On
R3.9DB
5030 mm (16'6")
2590 mm (8'6")
1.5 m/5.0 ft 3.0 m/10.0 ft 4.5 m/15.0 ft 6.0 m/20.0 ft 7.5 m/25.0 ft 9.0 m/30.0 ft
m
ft
ISO 10567
* Indicates that the load is limited by hydraulic lifting capacity rather than tipping load. The above loads are in compliance with hydraulic excavator lift capacity
standard ISO 10567:2007. They do not exceed 87% of hydraulic lifting capacity or 75% of tipping load. Weight of all lifting accessories must be deducted from the
above lifting capacities. Lifting capacities are based on the machine standing on a firm, uniform supporting surface. The use of a work tool attachment point to
handle/lift objects, could affect the machine lift performance.
Lift capacity stays with ±5% for all available track shoes.
Always refer to the appropriate Operation and Maintenance Manual for specific product information.
24
336F L Hydraulic Excavator Specifications
Extreme Service Reach Boom Lift Capacities – Counterweight: 7.0 mt (7.7 t) – Heavy Lift: On
R3.9DB
5030 mm (16'6")
2590 mm (8'6")
1.5 m/5.0 ft 3.0 m/10.0 ft 4.5 m/15.0 ft 6.0 m/20.0 ft 7.5 m/25.0 ft 9.0 m/30.0 ft
m
ft
ISO 10567
* Indicates that the load is limited by hydraulic lifting capacity rather than tipping load. The above loads are in compliance with hydraulic excavator lift capacity
standard ISO 10567:2007. They do not exceed 87% of hydraulic lifting capacity or 75% of tipping load. Weight of all lifting accessories must be deducted from the
above lifting capacities. Lifting capacities are based on the machine standing on a firm, uniform supporting surface. The use of a work tool attachment point to
handle/lift objects, could affect the machine lift performance.
Lift capacity stays with ±5% for all available track shoes.
Always refer to the appropriate Operation and Maintenance Manual for specific product information.
25
336F L Hydraulic Excavator Specifications
Extreme Service Reach Boom Lift Capacities – Counterweight: 7.0 mt (7.7 t) – Heavy Lift: On
R3.2DB
5030 mm (16'6")
2590 mm (8'6")
1.5 m/5.0 ft 3.0 m/10.0 ft 4.5 m/15.0 ft 6.0 m/20.0 ft 7.5 m/25.0 ft 9.0 m/30.0 ft
m
ft
ISO 10567
* Indicates that the load is limited by hydraulic lifting capacity rather than tipping load. The above loads are in compliance with hydraulic excavator lift capacity
standard ISO 10567:2007. They do not exceed 87% of hydraulic lifting capacity or 75% of tipping load. Weight of all lifting accessories must be deducted from the
above lifting capacities. Lifting capacities are based on the machine standing on a firm, uniform supporting surface. The use of a work tool attachment point to
handle/lift objects, could affect the machine lift performance.
Lift capacity stays with ±5% for all available track shoes.
Always refer to the appropriate Operation and Maintenance Manual for specific product information.
26
336F L Hydraulic Excavator Specifications
Extreme Service Reach Boom Lift Capacities – Counterweight: 7.0 mt (7.7 t) – Heavy Lift: On
R3.9DB
5030 mm (16'6")
2590 mm (8'6")
1.5 m/5.0 ft 3.0 m/10.0 ft 4.5 m/15.0 ft 6.0 m/20.0 ft 7.5 m/25.0 ft 9.0 m/30.0 ft
m
ft
ISO 10567
* Indicates that the load is limited by hydraulic lifting capacity rather than tipping load. The above loads are in compliance with hydraulic excavator lift capacity
standard ISO 10567:2007. They do not exceed 87% of hydraulic lifting capacity or 75% of tipping load. Weight of all lifting accessories must be deducted from the
above lifting capacities. Lifting capacities are based on the machine standing on a firm, uniform supporting surface. The use of a work tool attachment point to
handle/lift objects, could affect the machine lift performance.
Lift capacity stays with ±5% for all available track shoes.
Always refer to the appropriate Operation and Maintenance Manual for specific product information.
27
336F L Hydraulic Excavator Specifications
Extreme Service Reach Boom Lift Capacities – Counterweight: 7.0 mt (7.7 t) – Heavy Lift: On
R3.2DB
5030 mm (16'6")
2590 mm (8'6")
1.5 m/5.0 ft 3.0 m/10.0 ft 4.5 m/15.0 ft 6.0 m/20.0 ft 7.5 m/25.0 ft 9.0 m/30.0 ft
m
ft
ISO 10567
* Indicates that the load is limited by hydraulic lifting capacity rather than tipping load. The above loads are in compliance with hydraulic excavator lift capacity
standard ISO 10567:2007. They do not exceed 87% of hydraulic lifting capacity or 75% of tipping load. Weight of all lifting accessories must be deducted from the
above lifting capacities. Lifting capacities are based on the machine standing on a firm, uniform supporting surface. The use of a work tool attachment point to
handle/lift objects, could affect the machine lift performance.
Lift capacity stays with ±5% for all available track shoes.
Always refer to the appropriate Operation and Maintenance Manual for specific product information.
28
336F L Hydraulic Excavator Specifications
M2.55TB
5030 mm (16'6")
2590 mm (8'6")
1.5 m/5.0 ft 3.0 m/10.0 ft 4.5 m/15.0 ft 6.0 m/20.0 ft 7.5 m/25.0 ft 9.0 m/30.0 ft
m
ft
ISO 10567
* Indicates that the load is limited by hydraulic lifting capacity rather than tipping load. The above loads are in compliance with hydraulic excavator lift capacity
standard ISO 10567:2007. They do not exceed 87% of hydraulic lifting capacity or 75% of tipping load. Weight of all lifting accessories must be deducted from the
above lifting capacities. Lifting capacities are based on the machine standing on a firm, uniform supporting surface. The use of a work tool attachment point to
handle/lift objects, could affect the machine lift performance.
Lift capacity stays with ±5% for all available track shoes.
Always refer to the appropriate Operation and Maintenance Manual for specific product information.
29
336F L Hydraulic Excavator Specifications
Boom Type Heavy Duty Reach Boom Extreme Service Reach Boom Mass Boom
Stick Size R3.9 (HD) R3.2 (HD) R3.9 (ES) R3.2 (ES) M2.55
(12'10") (10'6") (12'10") (10'6") (8'4")
Hydraulic Hammer H140E s H140E s H140E s H140E s H140E s
H160E s** H160E s H160E s** H160E s H160E s
H180E s**^ H180E s** H180E s**
Multi-Processor MP324 CC Jaw MP324 CC Jaw MP324 CC Jaw MP324 CC Jaw
MP324 D Jaw MP324 D Jaw MP324 D Jaw MP324 D Jaw
MP324 P Jaw MP324 P Jaw MP324 P Jaw MP324 P Jaw
MP324 S Jaw MP324 S Jaw MP324 S Jaw MP324 S Jaw
MP324 TS Jaw MP324 TS Jaw MP324 TS Jaw MP324 TS Jaw
MP324 U Jaw MP324 U Jaw MP324 U Jaw MP324 U Jaw
MP30 CC Jaw*** MP30 CC Jaw^^ MP30 CC Jaw*** MP30 CC Jaw MP30 CC Jaw
MP30 CR Jaw*** MP30 CR Jaw^^ MP30 CR Jaw*** MP30 CR Jaw MP30 CR Jaw
MP30 PP Jaw**^ MP30 PP Jaw** MP30 PP Jaw**
MP30 PS Jaw*** MP30 PS Jaw^^ MP30 PS Jaw*** MP30 PS Jaw MP30 PS Jaw
MP30 S Jaw** MP30 S Jaw MP30 S Jaw
MP30 TS Jaw***# MP30 TS Jaw*** MP30 TS Jaw**
Pulverizer P225 P225 P225 P225
P235*** P235^^ P235 P235
Demolition and Sorting Grapple G325B G325B G325B G325B
G330*** G330^^ G330*** G330 G330
Mobile Scrap and Demolition Shear S325B S325B S325B** S325B S340B***
S365C## S365C## S365C## S365C## S365C##
Compactor (Vibratory Plate) CVP110 CVP110 CVP110 CVP110 CVP110
Orange Peel Grapple
Rippers
These work tools are available for the 336F L. Consult your Cat dealer for proper match.
Pin Grabber Coupler
Dedicated Quick Coupler
*Matches are dependent on excavator configurations. Consult your Cat dealer for proper work tool match.
**Pin on or dedicated coupler.
***Pin on only.
#Over the front only.
##Boom mount.
^Over the front only with dedicated coupler.
30
336F L Hydraulic Excavator Specifications
31
336F L Hydraulic Excavator Specifications
Caterpillar recommends using appropriate work tools to maximize the value customers receive from our products. Use of work tools, including buckets, which are
outside of Caterpillar’s recommendations or specifications for weight, dimensions, flows, pressures, etc. may result in less-than-optimal performance, including
but not limited to reductions in production, stability, reliability, and component durability. Improper use of a work tool resulting in sweeping, prying, twisting and/or
catching of heavy loads will reduce the life of the boom and stick.
32
336F L Standard Equipment
Standard Equipment
Standard equipment may vary. Consult your Cat dealer for details.
33
336F L Optional Equipment
Optional Equipment
Optional equipment may vary. Consult your Cat dealer for details.
right-side light
34
Notes
35
For more complete information on Cat products, dealer services, and industry solutions, visit us on the web AEHQ7156 (05-2014)
at www.cat.com (North America)
© 2014 Caterpillar
All rights reserved
Materials and specifications are subject to change without notice. Featured machines in photos may include
additional equipment. See your Cat dealer for available options.
CAT, CATERPILLAR, SAFETY.CAT.COM, their respective logos, “Caterpillar Yellow” and the “Power Edge”
trade dress, as well as corporate and product identity used herein, are trademarks of Caterpillar and may
not be used without permission.
VisionLink is a trademark of Trimble Navigation Limited, registered in the United States and in other countries.