Professional Documents
Culture Documents
Select the correct type of shackle for the particular application, from When using shackles in conjunction multi- slings, due
information given in sub-section and following notes.
Shackles consideration must be given to the effect of the angle
Steel Wire Rope Sling And Fittings should be fitted to the load in a manner that allows the shackle body between the legs of the sling. As the angle increases so
to take the load in a true line along its centre line; and not in such a does the load in the leg and consequently in any shackle
Turn Buckles that bending loads are reduced, other than those for which the attached to that leg.
shackle is designed.
Webbing / Round Slings Note: In the case of higher tensile steel shackle, it is
Shackles
Winches
liftechniques.com/shack_incorrect_applications.html 1/3
1/5/22, 10:54 AM liftech
Jacks
If the load shifts the sling will unscrew the shackle pin.
To avoid eccentric loading of the shackle a loose spacer may be Use two ropes with eyes as required by Construction
used on either end of the shackle pin or a shackle with a smaller jaw Lifting Operations
width should de used. Do not reduce the width between the shackle
by closing jaws, as this will have an adverse effect on the properties Avoid applications where due to movement (e. g. of the load
or rope) the shackle pin can roll and possibly unscrew.
of the shackle. If the load shifts the sling will unscrew the shackle
pin.
blocks the load on this shackle is increased by the value of the Shackle pin bearing on
hoisting effort. running line can work loose.
liftechniques.com/shack_incorrect_applications.html 2/3
1/5/22, 10:54 AM liftech
liftechniques.com/shack_incorrect_applications.html 3/3