Professional Documents
Culture Documents
server?
Select the correct response.
● Power supplies
● Drive cages
● *M.2 SSDs
● Heatsink
When an HPE ProLiant Gen9 server is powered off, what happens when you briefly press the
UID button?
Select the correct response.
● The server powers on and the host operating system boots.
● The iLO management engine runs POST without booting the server.
● The iLO management engine reboots.
● *The server displays the pre-boot health summary screen.
What benefit is provided by HPE Smart Array controllers using FBWC over BBWC?
Select the correct response.
● improve write operations by temporarily storing data in DRAM instead of on the drives
● provide long term data storage onto high powered batteries
● *write the contents of memory to a non-volatile storage devices
● utilize rechargeable batteries allowing them to maintain full charge even after a power
failure
Which Solid State Drives (SSDs) are supported by HPE ProLiant Gen10 servers?
Select all that apply.
● *uff - Micro Form Factor
● *Large Form Factor (LFF)
● *Small Form Factor (SFF)
● *PCIe HHHL
A customer notices the UID LED is flashing blue. What does this indicate?
Select the correct response.
● The server is working fine.
● A critical issue with the server.
● The UID is activated to display health summary.
● *The system is being remotely managed.
How many drives does the HPE ProLiant ML350 Gen9 server support?
Select the correct response.
● 26 SFF or 15 LFF
● 24 SFF or 12 LFF
● *48 SFF or 24 LFF
● 16 SFF or 12 LFF
Which of the following statements describing Embedded UEFI Shell are true?
Select all that apply.
● *UEFI Shell environment provides an API and a CLI that enables scripting, file
manipulation, and obtaining system information.
● *UEFI Shell runs other UEFI applications.
● UEFI Shell is not enabled by default.
● System BIOS update not supported by UEFI Shell.
What is the correct location to access the Integrated Management Log (IML)?
Select the correct response.
● iLO RESTful Interface tool
● BIOS
● *iLO Web interface
● iLO Service Port
The client network adapter is assigned a link-local address. This process may take several seconds. Connect to iLO 5 through a
browser, remote console, the CLI, or a scripting utility by using the following IPv4 address: 169.254.1.2.
Which feature lets you manage multiple servers from one system running the iLO web
interface?
Select the correct response.
EMS console
*iLO Federation
Systems Insight Manager
Integrated Remote Console
The components on the front of the HPE ProLiant BL460c Gen10 server blade are shown
below.
Identify the circled component.
The iLO related logs like logi/ logout etc. are logged in _________.
Select the correct response.
*iLO Event Log
AHS Log
None of the above
IML
A server has experienced a drive failure. The server has an HPE Smart Array controller
supporting the rapid rebuild technology. Which factors can impact the actual rebuild time?
Remote management is key to the iLO 5 "Lights-Out" core functionality. You do not need to be
physically at the server to deploy, provision, and control it.
Select the correct response.
*True
False
The HPE ProLiant BL460c Gen10 server blade can be installed in either an HPE BladeSystem
c7000 enclosure or an HPE BladeSystem c3000 enclosure.
Select the correct response.
*True
False
Form Factor HPE ProLiant BL460c Gen10 is a half-height server blade that plugs into the HPE BladeSystem c3000 and c7000
enclosures.
Refer to the exhibit of an HPE ProLiant DL380 Gen9 server fully populated with SFF drives.
Which drive bay can be replaced with an optional Universal Media Bay?
Select the correct response.
● *1
● 2
● 3
You have only one port available on your network switch and you need both iLO connectivity
and server access. How do you configure this?
Select the correct response.
● Network Packet Shaping
● Dynamic Network Sharing
● *iLO Shared Network Port
● Layer 3 network switching
Which of these tools are available for managing the server through scripting and command-line
methods?
Select all that apply.
● *iLO RESTful API
● *The RESTful Interface Tool.
● *RIBCL scripts
● None of the above
A customer is trying to configure debug through the serial port. Select the correct path in
System Utilities to enable debug using the serial port connection.
Select the correct response.
● System Configuration > BIOS/Platform Configuration (RBSU) > Workload Profiles
● System Configuration > BIOS/Platform Configuration (RBSU) > Boot Options
● System Configuration > BIOS/Platform Configuration (RBSU) > Server Security
● *System Configuration > BIOS/Platform Configuration (RBSU) > Advanced Options
(asked twice)Your customer has a rack with 1U of unused space and wants to fill the space with
a new server. Which server will fit in this opening?
Select the correct response.
● HPE ProLiant ML150 Gen9
● *HPE ProLiant DL160 Gen9
● HPE ProLiant DL180 Gen9
● HPE ProLiant DL380 Gen9
What firmware types can you update through iLO for a single server or a group of servers?
Select all that apply.
● *Chassis firmware
● *BIOS
● Drivers
● *System Programmable Logic Device (CPLD)
Which iLO feature/tool lets you mount media from anywhere on the network (such as your
laptop or home office) and boot the server from standard media?
Select the correct response.
● DVD drive connected to server
● iLO Visual Media
● iLO Virtual Mounter
● *iLO Virtual Media
Which iLO feature can be used to control the display, keyboard, and mouse of the host server?
Select the correct response.
● Integrated Remote Controller
● Insight Remote Console
● *Integrated Remote Console
● Integrated Rescue Console
A System Recovery Set is included with every server. The components of the set are:
Select all that apply.
● System Programmable Logic Device (CPLD)
● *System ROM (BIOS)
● *iLO firmware
● *Server Platform Services (SPS) firmware
A customer requires a rack server that can house at least 20 small form factor (SFF) hard
drives. Which Gen9 server should you recommend?
Select the correct response.
● HPE ProLiant DL160 Gen9
● HPE ProLiant DL180 Gen9
● HPE ProLiant DL360 Gen9
● *HPE ProLiant DL380 Gen9
What happens when you press the UID button of an HPE ProLiant Gen9 DL300 series server
for more than five seconds?
Select the correct response.
● The UID LED flashes.
● *The iLO management engine reboots.
● The contents of RAM are dumped to the boot device.
● The operating system performs a graceful shutdown.
A customer is considering using the HPE RESTful API to manage HPE ProLiant Gen9 server
iLO management engines, but is concerned about potential security issues. What should you
tell the customer?
The iLO 5 ASIC is not embedded on the server system board; it’s a stand-alone card.
iLO Service Port is a new feature introduced with HPE ProLiant Gen10 Servers. In order to
access iLO 5 through it, you would need a USB-Ethernet adapter.
Select the correct response.
*True
False
When a Restore Default System Settings is performed in the BIOS of server , which of these is
true?
Select the correct response.
● *All BIOS configuration settings are reset to their default values, and the server is
immediately and automatically restarted.
● All BIOS configuration settings are reset to their default manufacturing values, and all
UEFI non-volatile variables are deleted.
Restore Default System Settings
Use this option to reset all BIOS configuration settings to their default values and immediately and automatically restart the server.
You can save a custom default configuration to use during a system restore. Doing so saves settings you might otherwise lose. See
User Default Options.
What are advantages of the UEFI BIOS when compared with the Legacy BIOS?
Select all that apply.
● ability for customers to create high-availability clusters
● elimination of the requirement for network boot using PXE
● *enhanced security with Secure Boot support
● elimination of the requirement for IPv6 addressing
● *ability to boot from hard drives larger than 2.2 TB
The Integrated Remote Console Record and Playback feature is included with the HPE iLO
Standard license.
Select the correct response.
● True
● *False
What are the possible reasons to use the iLO Service Port?
Select all that apply.
● To try to access the connected device from the server.
● *To connect to access the iLO web interface, remote console, CLI using a supported
USB-to-Ethernet adapter.
● To try to access the server through the iLO Service Port.
● *To retrieve iLO Event Log.
Which of the following are true about the HPE ProLiant ML30 Gen10 server?
Select all that apply.
● *Supports HPE Smart Array S100i controller Raid 0/1/10/5
● 1 ATX 300W/500W PS, RPSU Redundancy
● *Chassis 4U Tower (Tower to Rack Conversion Kit)
● *Supports 4 DDR4 UDIMM 2666 MT/s up to 64GB
● *Supports Intel Xeon E-2100 processor series
In the UEFI BIOS pre-boot screen shown below, the One-Time Boot Menu using F11 is
disabled. What is the correct path in System Utilities to enable it?
Which service routes configuration and service event information through a host server?
Select the correct response.
● *HPE Insight Remote Support central connect
● HPE Insight Online direct connect
● HPE Systems Insight Manager
● HPE Insight Remote Control Online
You are unable to access Virtual Media from HPE iLO IRC. What is the most likely reason for
this?
Select the correct response.
● Virtual Media is incorrectly configured.
● The host server media drives require updating.
● *The customer does not have the iLO Advanced license.
● The Virtual Media setting in the iLO ROM must be enabled.
Which processor series is used in HPE ProLiant DL Gen9 servers?
Select the correct response.
● Intel® Atom® C2750
● Intel® Xeon® E5-2400 v2
● *Intel® Xeon® E5-2600 v3
● AMD Opteron™ X2150
By which method does iLO communicate directly to the HPE Support Datacenter?
Select the correct response.
● Integrated Management Log
● Insight Remote Support central connect
● Integrated Remote Console
● *HPE Insight Online Direct Connect
In the example serial number shown in the graphic, what does ZZZZ represent?
Country Code
Year Code
*Unique identifier
Week Code
Which server supports only one Intel Xeon E5-2600 v3 series processor?
Refer to the exhibit of an internal view of the HPE ProLiant WS460c Graphics Server Blade.
Jackie KappelQuestion 10 of 60
Which of these is not part of the common options in the Gen10 ProLiant server family?
Text-Based Remote Console via SSH is supported only on servers that are configured to use
the Legacy BIOS boot mode. It is not supported on servers that are configured to use UEFI
mode.
Select the correct path to launch Intelligent Provisioning from System Utilities.
Select the correct response.
*System Utilities > Embedded Applications
System Configuration > BIOS/Platform Configuration (RBSU) > Boot Options
System Configuration > BIOS/Platform Configuration (RBSU) > Advanced Options
System Configuration > BIOS Platform/Configuration (RBSU) > System Options
The picture below shows some of the main components on the system board of an HPE
ProLiant BL460c Gen10 server blade.
The Secure Shell Key page displays the hash of the SSH public key associated with each user.
How many SSH keys can each user have assigned?
Which tool replaces the SmartStart CDs and Smart Update Firmware DVD that were used with
previous-generation ProLiant servers?
Select the correct response.
● True
● *False
Which of the following is true about the HPE ProLiant DL380 Gen10 server?
Select the correct response.
From System Utilities a customer uses Restore Default Manufacturing Settings to reset all BIOS
configuration settings to factory values, except UEFI variables (such as boot configuration and
Secure Boot security keys) which are not erased.
Select the correct response.
● True
● *False
The difference between this action and the Restore Default System Settings option is that Restore Default Manufacturing
Settings erases all UEFI variables. An OS can write UEFI variables that store such things as entries in the boot order and key
database information for Secure Boot. When you Restore Default Manufacturing Settings, this information is cleared, whereas it is
retained when you Restore Default System Settings.
The internal components of the HPE ProLiant DL180 Gen10 server are shown below.
Identify the component numbered 11.
What is the power source for the backup cache in the HPE Smart Array controllers used in HPE
ProLiant Gen9 servers?
Select the correct response.
● HPE 1200W 12V 48VDC Redundant Power Supply
● *HPE Smart Storage Battery
● HPE -48VDC Hot Plug Power Supply
● HPE Cache Module Super-Cap
iLO default user credentials (for first time you log in) are located on the serial label pull tab
attached to the server.
Select the correct response.
*True
False
iLO default credentials
The iLO firmware is configured with a default user name, password, and DNS name. The default information is on the serial label
pull tab attached to the server that contains the iLO management processor. Use these values to access iLO remotely from a
network client by using a web browser.
User name - Administrator
Password - A random eight-character string
DNS name - ILOXXXXXXXXXXXX, where the X characters represent the server serial number.
Drive roaming lets you move disk drives and arrays while maintaining data availability. You can move one or more disk drives in a
configured logical drive to a different bay position as long as the new bay position is accessible by the same controller.
iLO 5 enables Gen10 servers to be the world’s most secure industry standard servers with the
HPE Silicon Root of Trust technology.
Select the correct response.
● *True
● False
Integrated Lights-Out
HPE Gen10 Servers are offered with HPE Integrated Lights-Out 5 (iLO5). The HPE iLO subsystem, a standard component of HPE
ProLiant Servers, simplifies server setup, health monitoring, power and thermal optimization, and remote server administration. With
an intelligent microprocessor, secure memory, and dedicated network interface, iLO offers varying degrees of encryption and
security.
The iLO5 chipset provides an unprecedented level of hardware security with its silicon root of trust. The silicon root of trust:
- Is based in the silicon chip hardware itself
- Is virtually impossible to alter
- Enables firmware to be authenticated as far back as the supply chain
- Provides a secure startup process
● Power-cycle events
● Unauthorized login attempts
● Operating System information
● ROM-based POST codes
Which of these operating systems are supported by HPE ProLiant Gen10 servers?
Select all that apply.
Pick the three modes of operation supported by the iLO 5 Restful Interface Tool.
Select all that apply.
● *Scriptable Mode
● *File-based Mode
● *Interactive Mode
● Incognito Mode
● Guest-User Mode
What benefit is provided by HPE Smart Array controllers using FBWC over BBWC?
Select the correct response.
● utilize rechargeable batteries allowing them to maintain full charge even after a power
failure
● provide long term data storage onto high powered batteries
● improve write operations by temporarily storing data in DRAM instead of on the drives
● *write the contents of memory to a non-volatile storage devices
● *RDIMM
● SIMM
● *UDIMM
● *LRDIMM
● *NVDIMM
● TransFlash Memory Module
A customer using an HPE ProLiant Gen10 server notices the drive status LED flashing amber.
What does this imply?
Select the correct response.
● The drive is a member of one or more logical drives.
● Smart Component Firmware update.
● The drive has failed.
● *The drive is not configured and predicts the drive will fail.
A customer is trying to read server configuration, firmware inventory, review event logs, and
update existing support cases. Which tool would you recommend?
Select the correct response.
● Intelligent Provisioning
● Smart Update Tools
● *Active Health System Viewer
● iLO Amplifier Pack
You need to be able to integrate HPE iLO 5 into your Microsoft Active Directory environment.
Which iLO license do you need?
Select the correct response.
● Essentials license
● *Advanced license
● Any license will suffice
● Standard license
UEFI Secure boot is supported by systems running the following Operating Systems.
Select all that apply.
● *Windows Server 2019
● *Windows Server 2012 R2
● Windows Server 2008
● *Windows Server 2016
Scorecard
86.67%
Pass
3 hours 5 minutes 15 seconds
Congratulations! You passed the test.
Thank you for taking the test.