Professional Documents
Culture Documents
In side by side comparisons with foil strain gages, the os3155 is equally sensitive
and accurate, while providing for greater strain range
and 100 times more fatigue life. The os3155
strain gage is qualified for use in harsh
environments and delivers the many
advantages inherent to all FBG based
sensors.
This sensor can be used alone or in
Deployments
series as a part of an FBG sensor Structures (bridges, dams, tunnels, mines, buildings, oil platforms)
array. Installation and cabling for such
Energy (wind turbines, oil wells, pipelines, nuclear reactors, generators)
arrays is much less expensive and
cumbersome than comparable Transportation (railways, trains, roadways, specialty vehicles, cranes)
electronic gage networks. Multiple Marine vessels (hull, deck, cargo containers)
optical strain gages can be arranged Aerospace (airframes, composite structures, wind tunnels, static and dynamic tests).
in close proximity at 0, 45 and 90
Homeland security (perimeter intrusion, heat detection, security gate monitoring)
degrees for strain rosette
measurements.
Optical Strain Gage | os3155
Physical Properties
xx Termination type
Dimensions; Weight See diagram below, 17 g
1xx Cable 1, Length & Connector
Carrier Material 302 stainless steel 1 1 m Standard, Cable Length
UT Unterminated
Cable Length 1 m (± 10 cm), each end FC FC/APC Connector
PF FC/APC Connector with
Fiber Type SMF28-Compatible Protection Fitting
yy Termination type
Cable Type 3 mm armored cable
1yy Cable 2, Length & Connector
Connectors FC/APC and Connector Protection Fitting optional 1 1 m Standard, Cable Length
UT Unterminated
Cable Bend Radius ≥ 17 mm
FC FC/APC Connector
PF
FC/APC Connector with
Fastening Methods2 Spot weld
Protection Fitting
Optical Properties
See http://www.micronoptics.com/support_downloads/
2 Sensors/ for installation details.