You are on page 1of 2

ECN No.

2010-E-0237

ENGINEERING CHANGE NOTICE (FIELD CHANGE NOTICE)

SUBJECT: Releasing DI-TOOL V3.6 for DRYPIX PLUS

Design Change Reason Action Time frame


Specification/Function Change Mandatory Immediately
Pro-active Improvement Recommended (by )
Serviceability Not required (Information only) Next maintenance
Part Replacement Other ( ) Upon failure
Corrective Action At your convenience
Preventive Action Not Applicable
Regulatory Compliance Other( service tool )
Other ( )

DATE: Jul. 20, 2011 Dept.: Medical Systems Business Div.


ORIGINATOR: M. Watanabe EDITED BY: Y. Ishikawa APPROVED BY: Y. Koyanagi
AFFECTED PRODUCTS: DRYPIX PLUS
TOTAL PAGE (S): 2 ATTACHMENT: YES NO
RELATED INFORMATION: N/A
***********************************************************************************************************************************

DESCRIPTION OF CHANGE:

DI-TOOL V3.6 is ready to be released.

In V3.6, the setting function on DRYPIX PLUS has been added to V3.3 and V3.5 ( versions respectively enabled
Bulgarian and Romanian language settings ).

In case of setting /maintaining DRYPIX PLUS, use V3.6. For another unit with DI-Tool, there is no problem
to keep using V3.3 or V3.5.

Downloading DI-Tool V3.6 is available on SIAS.

- APPLICABLE TO (Serial Nos. etc.): N/A


- ESTIMATED WORK TIME: N/A HOURS
- SPECIAL TOOLS / INSTRUMENTS: YES NO
- SUPPLY OF THE ARTICLES: YES NO
IF YES, WHEN: With this ECN
NAME / CODE: 114Y5133090A09
QUANTITY: Up to SIAS

- RETURN OF THE REPLACED PARTS TO FUJI: YES NO

DOCUMENTS AFFECTED: YES NO


AFFECTED CURRENT NEW
DOCUMENTS REV ISSUED DATE REV ISSUED DATE

DETAILS:

For upgrading DI-Tool, refer to the Service Manual “ DRYPIX 7000” or “DRYPIX 4000/ PLUS”.

The contents described or shown in our ECN documents and/or any information provided from FUJIFILM in verbal or written communication is intended for the
addressee and/or its organization. Transfer and/or copy distribution of the information without written consent of FUJIFILM is not permitted.

PAGE 1 of 2 K12N0028-6-J
ECN No. 2010-E-0237
- NOTE
1) Important information about SUPPLY OF THE ARTICLES:
Charge:
FREE OF CHARGE UNTIL (mmddyyyy): N/A
WITH YOUR CHARGE

The contents described or shown in our ECN documents and/or any information provided from FUJIFILM in verbal or written communication is intended for the
addressee and/or its organization. Transfer and/or copy distribution of the information without written consent of FUJIFILM is not permitted.

PAGE 2 of 2 K12N0028-6-J

You might also like