Professional Documents
Culture Documents
2. From any procedure menu screen on the system console, select the
Procedure Edit button.
Note: If the system console is configured with a floppy disk driver, to
make any changes to procedure edit, the procedure edit floppy disk
must be inserted into the disk drive.
Note: If the system console is configured with a USB Port, to make any
changes to procedure edit, please follow the below steps:
1. Turn the system off;
2. Plug in the APR&AEC USB disk into the USB port;
3. Follow the instructions to edit the procedure.
It shall be ensured that the APR&AEC USB disk is not removed
when the system is on.
5-2-2 Getting Started
The procedure menu, shown in Illustration 5-7, is the Category screen of
procedure edit. This screen was selected from the main screen.
ILLUSTRATION 5-7
PROCEDURE EDIT SCREEN
mA
5-10