Professional Documents
Culture Documents
Range overview
Fertilizing F50
Mowing M100
hectares
* All figures and graphs are rounded off and based on SKF testing estimates. Particular savings and results may vary
Mud slurry testing
Our Research and Development Center utilizes mud slurry testing
to thoroughly study new seal concepts before extensive field tests
are conducted to validate application performance. The test is
performed to determine the effectiveness of the bearing sealing
device to withstand contamination intrusion under aggressive en-
vironmental conditions. Seal designs are tested against compe-
titive parts in side-by-side mud slurry testing. Seal performance
is one of the most crucial factors influencing bearing life and field
performance in agricultural applications. We offers solutions
which fit environmental and machine requirements.
lips
lips
lips
Mudblock seal
Mudblock and
cassette seal
Source: Lab test and SKF and PEER customer field experience in Maintenance Free Solutions since 1997
Sealing range overview
According to application and typical environment, recommended seal design differs. Our application engineers can guide and
develop new product and seal designs together with you before mud slurry testing and field tests can validate the product.
Agri Hub T for tillage
D
a e
c g
Type Type
b e c
– – – – mm mm
AGHUXE-DSC * Mx.
AGHUXE-DSCS * Mx.
AGHUXE-DSCS * Mx.
AGHUXE-DSCS * Mx.
AGHUXE-DSC * Mx.
a a
c c
H H
b b
Type Type
Depending on
a D g H application
mm mm mm – – mm
Agri Hub T for tillage
D
a e
c g
Type Type
b e c
– – – – mm mm
a a
c c
b b
Type Type
Depending on
a D g H application
mm mm mm – – mm
Agri Hub T for tillage
D
B J
GF
Type Type
Product designation Order part number Type Key dimensions Shaft thread
D d GS
– – – mm mm –
B D
B1 J
GF
d1 Gs d
Type
d B B J GF
mm mm mm mm – mm – mm
Agri Hub T for tillage
B D
B1 J
GS d1 d
Type Type
Product designation Order part number Type Key dimensions Shaft thread
D d GS
– – – mm mm –
B
B1
GF
GS d1
Type
d B B J N/GF
mm mm mm mm – mm – mm
Agri Hub S and S for seeding
B J
GF
D d
d B D D
– – – mm mm mm mm
B J B J
N N
D D1 d D D1 d
Type Type
PCD
J N/GF
mm – mm – mm
Agri Hub S for seeding
D
c e
Type Type
b e c
– – – – mm mm
AGHUXD-L HUB-MM-X –
AGHUXD-L HUB-MM-X-R-A –
AGHUXD-L-V KIT-HUB-MM-X-R-A –
– HUB-MM-R-A –
– HUB-MM-X-R-A –
– BB-PF-R-FC-A – –
– BB-KPP-R-FC-A – , –
– BB-KPP-R-FC-A – , –
– BB-KPMF-R-FC-A – , –
– BB-PF-R-DFC-A – –
– BB-PY-R-ZDFC-A – –
D
a e D
c g c e
b d
H H
Type Type
a D g d H
mm mm mm mm – – mm
Agri Hub F for fertilizing
b
c
F
a
E
Product designation Order part number Attachment holes Max. tilting moment Shaft
in outer ring
a b c E F g Nm
– – mm mm mm mm mm – –
Agri Hub M for moving
D d
d D B
– – mm mm mm
AGHUB-CSCS BAH- E )
AGHUB-LSLS BAH- D )
AGHUB-CSOS BAH- AB )
Agri Hub designation system
Agri Hub designation system
. Serie prefix
. Agriculture products initiate by prefix AG
. Agriculture product types
HU, Agri Hub
HK, Kit with Agri Hub, screw and washers, nut
. Hub dimensions
. Bore
Metric in mm uncoded in or digits
Inch in fractions of / of an inch in digits.
i.e. digit, No. of inches. and digit / of inches.
. Units systems
Exclude (X) for metric sizes
Include (X) for inch sizes
. Pitch diameter for disc holes or bearing OD
Unit with flange:, pitch diameter for disc holes dimension, (in mm uncoded
if metric or digits but larger than ., digits if inch as per .)
Bearing only:, bearing OD in mm
. ID for No. of disc holes or bearing only.
Digit for the No. of disc holes
Exclude digit refer to bearing only
. Sealings
. Seal type on the dynamic side
digit and letter or letters
Flinger or shield or labyrinth are standard.
. Seal or cover on the flange side
digit and letter or letters
Without cover are standard for design with shaft on one dynamic side.
Agri Hub designation system
Designation examples
Kit in common
AGHKXE-L-V, same as the first example in the
table, but product include all screw, washer and nut.
skf.com | peerbearing.com
® SKF and PEER Bearing are registered trademarks of the SKF Group.