Professional Documents
Culture Documents
Light Sensor Setting
Light Sensor Setting
html
·=
9D
l
I
I
• I+
~
2) Set ignition "ON" and wait for 3 seconds.
3) Change position of adjustment knob in sequence of 5-+ 4 -+ 5 -+ 1 -+ 5 -+ 4 -+ 5 within 7 seconds.
1 __ __ [A]
2 ___ J
3 ___ _ I
4 ____ I
5---- [B]
I d in 5 13 12.20 17. 0 8 55
.-.t.A:'94060 I 5 https://serviceportal .s uzuki.eu/suzuki/ manuals/ X M UAENGAAONnavi /navi_ to p_a m.html
~
[A] : - [BJ: +
NOTE:
-----------------
If clearance lights operate repeating a 3-second on, 1-second off cycle, rain / light sensor may be abnormal. Perform
diagnosis in this case.
NOTE:
On proceeding to setting change mode for selected setting item, headlights flash in pattern specific to current setting .
Check current setting referring to the following table before starting setting change operation.
----
~
Auto-on headlight system operation mode ---
ON
OFF
Standard
2 d in 5 13 . 12.201 7, 0 8 55
,oA94060l 5 https:/ /serviceportal .s uzuki .eu/suzuki/ manuals/ XM U A ENGAAOA/navi/ navi top a m. hnnl
3.5 sec
ON
~
O5 sec
ON
OFF
Semi-automatic operation
~
, 15 sec ,
ON
~
OS sec
ON
3 din 5
13 1:2 :2017 08 55
https ://serviceportal .s uzuki .cu/suzuki/ manual s/ XMU A ENGAAO N navi/navi _top am. hnnl
O
NJULJL
OFF
, 1 5 sec .
O 5 sec
Interlocked in any r ain
~
O
N 3.5 sec
~
I
LRe- initialization Perform Step 4) - 5) of " Initialization" under Rain I Light Sensor Initialization {If Equipped}.
4 d in 5 13 l :?.:?0 17. 0 8 55
https:/ /serviceportal .Suzuki .eu/suzuki/ manuals/XMU A ENG AAON nav i/ navi _top _am.html
Setting change procedure for interlocked operation of rain-sensing wiper and auto-on headlight f unctions
a) Set AUTO knob to position "2", and then change wiper and washer switch position from OFF t o AUTO .
b) Check that headlights flash in pattern of current setting .
c) Select desired setting mode referring to the following table.
d) Check that headlights flash in pattern of new setting.
2 or 1
Non-interlocked operation : Headlights do not turn on automatically even when wipers are automatica lly
operated. I
6) Check new setting referring to headl ight flashing patterns in table of Step 4) .
INOTE:
I
. Lighting or flashing of headlights will start about 5 seconds after setting change has been completed.
7) After completion of setting change, set ignition "OFF" or run the vehicle .
5 din 5
13 . 12.20 17, 08 55