Professional Documents
Culture Documents
05/05
INSTALLATION
These units are installed between flanges, ideal for applications where space restrictions
are an important factor.
MATERIALS OF CONSTRUCTION
Available in carbon steel, stainless steel and many other materials.
PERFORATIONS
Available in perforated and/or mesh for straining foreign matter as coarse as 1/2" or as fine
as 5 microns. (.0002).
STANDARD PERFORATIONS
Sizes Water Steam, gas, air
1/2"-2" 1/16" 1/32"
2-1/2" up 1/8" mesh lined
PRESSURE DROP
Temporary strainer's pressure drop is normally lower than "Y" strainer. Consult factory.
Plate Type
Model 24
300 #
mm
92 108 125 146 178 248 300 359 419 483 537 594 651 772
in
600 # 3-5/8 4-1/4 5 5-3/4 7-1/2 10-3/8 12-1/2 15-5/8 17-7/8 19-1/4 22-1/8 24 26-3/4 31
mm
92 108 125 146 191 264 318 397 454 489 562 600 679 787
ID (D2)
in
1-3/4 2-1/4 2-5/8 3-1/4 4-1/4 6-1/4 8-1/4 10-1/4 12-1/4 14 16 18 20 24
mm
44 57 67 83 108 159 210 260 311 350 400 450 500 600
in 2-1/4 2-3/4 3-1/4 3-3/4 5 6-3/4 8-1/2 10-1/2 12-1/4 13 14-1/2 16-1/2 19 22
150% mm
57 70 83 95 127 171 216 267 311 330 368 419 483 559
in 3 3-3/4 4-1/2 5 6-1/2 9-1/4 11-1/2 14-1/4 17 18 20-1/4 22-1/2 25-1/2 30-1/2
200% mm
76 95 114 127 165 235 292 362 432 457 514 572 648 775
in 4-1/2 5-3/4 6-1/2 7-3/4 10 14-1/4 17-3/4 22 26 27-1/2 31 35 39 47
300% mm
114 146 165 197 254 362 451 559 660 699 787 889 991 1194
in
4 5 5-3/4 6-3/4 8-1/2 12-1/2 16 20 23-1/2 26 29 32-1/2 36 43
150% mm
100 120 146 171 216 318 406 508 597 660 737 826 914 1092
in 5-3/4 7-1/4 8 9-1/2 11-3/4 17-1/2 22 27 32 35 40 44 48-1/2 58-1/2
200% mm
146 184 203 241 298 445 559 686 813 889 1016 1118 1232 1486
in 8-1/4 10-1/2 11-3/4 14 17-1/4 26 32-3/4 40-1/2 48 52-1/2 60 66-1/2 73-1/2
300% mm
210 267 298 356 438 660 832 1029 1219 1333 1524 1689 1867
LARGER SIZES AND HIGHER PRESSURE CLASSES AVAILABLE. CONSULT FACTORY