SO Medium-Heavy Range rE 1
Premium Series
2
Af Integrated Power Control wif Ve aa Clie)
TSS
+ High Power to Weight Ratio + Fully Enclosed Robust Housing&
Oa ROU INA ELC Dust Protector
+Service&Maintenance Friendly Ol aP lsc PALA Aas
+ Locking Device for the Tie Bolt Nut - Reduced Noise Levels
«Enhanced Performance&Productivity + Slim Profile with Robust Structure
«Improved Vibration-Noise Damping
System‘SOOSAN HYDRAULIC BREAKERS ESE WYRM
SG Line Silenced Series
‘The latest design from Soosan is the SQ breaker. Itis the result of more than 2 decades of experience since the com-
pany's inception in 1984, Through active communication and monitoring of a large group of valuable customers
from around the world, we have gained working experience from quarry, mining and construction industries. The
SQ series are practically an innovated hydraulic breaker while maintaining the superiority of the percussion mecha-
nism and easy maintenance of the existing SB series.
The SQ-series have been designed with many special feature:
‘The advanced gas & oil percussion mechanism generates extra power by accumulated gas pressure which ensures
a very reliable performance with a wide range of excavator pump conditions.
IPC & ABH System,
Integrated Power Control & Anti-Blank Hammering System
allows you to choose from 3 different modes.
‘The automatic anti blank hammering function (shut off) can be switched off or on. The operator can select the cor-
rect operating mode from high frequency with normal power to low frequency with extra power. With this advanced
system, the operator may choose the correct mode in accordance with site requirements in a matter of minutes and
With a minimum of hassle.
Auto shut-off & easy start function
Breaker operation can be automatically stopped in order to prevent consequential damage to the power cell due to
the blank hammering. Especially in secondary breaking or when the operator is unskilled.
Breaker operation is easy to restart when soft pressure is applied to the chisel to the work surface.
Enhanced vibration dampening & sound suppression system
Meet strict noise regulations and allow more comfort for the operator,
Further features are standard connections for underwater operation and an automatic lubrication pump.
‘scanneg win LamocannIPC & ABH SYSTEM CONTROL
| Technical Specifications SQ line |
Power control &
Anti blank hammering system
H-mode : Long stroke & Extra power, ABH is OFF
+ Mode used for hard rock breaking such as primary breaking, trench works and
foundation works where the rock condition is constant.
- Hammer can be started without applying contact pressure to the working tool
L-mode : Short stroke & Maximum frequency, ABH is OFF
- Hemmer can be started without applying contact pressure to the working tool.
This mode is used for soft rock and semi-hard rock breaking.
High impact frequency and normal power provides higher productivity and
reduces strain on the hammer and the carrier
X-~mode : Long Stroke & Extra power, ABH is ON.
- This mode is used for hard rock breaking such as primary breaking, trench.
Work, and secondary reduction works, where the rock condition is not constant.
“In ABH (Anti-blank hammering) working mode, it switches off the hammer
automatically and prevents the blank hammering, as soon as the material is
broken.
The hammer can be easily restarted when minimal contact pressure is applied
tothe working tool.
+ The ABH system reduces strain on the hammer and the carrier.
ee
j
s
mee § YY
“ “entre ABH
ond cn ie AH pa‘SOOSAN HYDRAULIC BREAKERS Eee eens)
‘Swivel connector
Urethane cushion
Gas charging valve
MC nylon plate
Greasing port
Negas chamber
Auto greasing
High pressure & temp. seals
Valve adjuster Only 2 moving parts
Es IPCR ABH syste
Air check valve
Urethane wear plates
High pressure temp. seals
Heavy-duty tool stop
‘Auto. Lubrication line
Heavy-duty tool retainer
Tool retainer lock
Hardox steel reinforcement
Hardox steel reinforcement Tool bushing
Dust protector Urethane cushion
- Dust protector reduces the noise + Improved tool retaining system.
level and dirt dirt entry
Tool retainer cushion
Dust provector
scannea win Lamocann‘SOOSAN HYDRAULIC BREAKERS Eee eens)
DARPA
Advanced design technology for output energy
The well known powerful performance of the SB breakers is continued on the SQ fine. With improvements to the
percussion mechanism allows even more reliable and durable operation than the SB line.
Slim profile with robust structure
State of art slim profile for better visibility in narrow trench work. Hardox steel reinforcements at the lower end of the
housing, protect the casing and power cell
Improved vibration damping system
Fully isolated power cell with premium quality urethane cushions and wear plates absorbs shock and vibration re-
sulting in reduced wear.
Fully enclosed housing and dust protector
For quieter operation and reduced dirt contamination.
4 |
Enhanced performance & productivity
By using a valve adjuster and an advanced power control system, SQ breakers,
can be adjusted to the excavator’ specifications and jobsite conditions to en |
able maximum productivity |
Service and maintenance friendly
‘The greasing port is located on the service panel. The service panel gives direct
and easy access to key components without removing the power cell from the
|
Locking device for the tie bolt nut ‘Tie rods with helisert coll
This prevents the power cell from consequential damage that may be caused | * Larger eross-sectional area
by the loosening of the tie bolt. reduces the possibility of |
crack on Front Head even |
High power to weight ratio under extreme working
The use of high quality materials and high technology results in less weight, condition |
and higher performance. a LL
+ Improved vibration damping system
jeat-resistant urethane cushions and’
| wear plates
‘Urethane upper cushion
MC nylon plate: protecting Upper Cushion from heat
‘scanneg win Lamocann‘SOOSAN HYDRAULIC BREAKERS Eee eens)
Impact Power Mechanism 3D Analysis
Keeping dynamical stability through optimum design using 3D Software and computer System structural analysis,
Accumulated experiences & Implementation of market feedback for last 35years
Unique Patent Technology
Minimized scratch to protect piston Bcylinder Improvement of closing plug (Easy to assernbly)
Piston scratch prevention device(Cooper alloy retainer) Rubber Plug
scannea win Lamocann‘SOOSAN HYDRAULIC BREAKERS
Applications ; + Primary and secondary breaking in quarries
+ Site preparation, foundation works
Road construction
Demolition works, heavily reinforced concrete
“Trenching
“Tunneling
+ Bench leveling
General construction works
Specifications
Tm en
Operating weight | kg lbs) 1,607 3.548), 1,789 (3.78) 2.058526) 2.186 4817) 2.601 880)
en ‘on 15-18 1e-2t 18-26 25-30 28-35
"at ibs) (83.000—40,0001 | 140,000~46.000) | t4a.000-8@.000 | (55,000~6,0001 | (62,000-77,000)
Height men Gnch)) 25861 100) 2986 105) 28061110) 29240118) 3.168126)
Required ol Vin 90-120 100-150 120-180 150-210 100-240
Gimin 238-31. 254-298) Gi7-a78) 696-855 76-634)
be 160-180 160-160 180-180 160-100 160-160
Operating pressure | (pai) (2.276-2.560) (2.276-2,860) (2.276-2,560) (2276-2560) (2276-2660)
Hmode
ug 380-650 360-600 350-500 00-4850 00-460
Impact rato bpm
Lmode 200-860 500-880 500-700 0-880 420-880
Tool diameter —|rmiinch), 125449) 138 631 14065) 180,69) 185,6.1)
Ce Unit or or or on
Operating weight | kg (os) 3.008 66871 3.168 (6986) 3.950 (8,708) 889 (12.860)
ton 20-45 0-45 40-55 50-00
Corner eoratt 9) | (@8,000-100,000) (71,000~1 0,000) {e8000~121,000) (110.00-200,000)
Height mm tnch))——9;360(182) 34 (136) 3771081) anata)
5 Mmin 200-200 200-200 210-280
edi list 23-087) (508-657) 55-7661
bar 160-160 160-160 160-180
Operating Pressure | psi (2276-2,560) 2276-2860 2276-2.560)
Hmode
ae 20-400 200-250 200-250 200-200
Impact rate bpm
L-mode 20-580 300-500 320-470 200-400
Tool diameter mm tach! 165 65) 185,65) 175169 007.9SOOSAN Global Network
Distributed by
Rae)