Professional Documents
Culture Documents
Induced Draft Cooling tower of Flow rate 520 M3/HR at roof of TG main control Building with Standard
Accessories as per the contractual specification and as agreed during preorder meetings, as
required/applicable within terminal points to make system complete, as derived during detail
1 engineering, design & engineering and engineering inputs for interface, as per specification and our 2 Nos - -
techno-commercial bid/ subsequent TQ clarifications/ MOM/ various correspondences had with you till
date and taking into consideration the clarification/ resolutions/ MOM’s/Amendments had with you till
date in regard to technical and commercial points
Induced Draft Cooling tower of Flow rate 325 M3/HR at roof of Service Building with Standard
Accessories as per the contractual specification and as agreed during preorder meetings, as
required/applicable within terminal points to make system complete, as derived during detail
2 engineering, design & engineering and engineering inputs for interface, as per specification and our 2 Nos
techno-commercial bid/ subsequent TQ clarifications/ MOM/ various correspondences had with you till
date and taking into consideration the clarification/ resolutions/ MOM’s/Amendments had with you till
date in regard to technical and commercial points
Induced Draft Cooling tower of Flow rate 54 M3/HR at roof of Canteen Building with Standard
Accessories as per the contractual specification and as agreed during preorder meetings, as
required/applicable within terminal points to make system complete, as derived during detail
3 engineering, design & engineering and engineering inputs for interface, as per specification and our 2 Nos
techno-commercial bid/ subsequent TQ clarifications/ MOM/ various correspondences had with you till
date and taking into consideration the clarification/ resolutions/ MOM’s/Amendments had with you till
date in regard to technical and commercial points
Induced Draft Cooling tower of Flow rate 66M3/HR at roof of water system control Building with
Standard Accessories as per the contractual specification and as agreed during preorder meetings, as
required/applicable within terminal points to make system complete, as derived during detail
4 engineering, design & engineering and engineering inputs for interface, as per specification and our 2 Nos
techno-commercial bid/ subsequent TQ clarifications/ MOM/ various correspondences had with you till
date and taking into consideration the clarification/ resolutions/ MOM’s/Amendments had with you till
date in regard to technical and commercial points
Induced Draft Cooling tower of Flow rate 37 M3/HR at roof of Switch yard control Building with
Standard Accessories as per the contractual specification and as agreed during preorder meetings, as
required/applicable within terminal points to make system complete, as derived during detail
5 engineering, design & engineering and engineering inputs for interface, as per specification and our 2 Nos
techno-commercial bid/ subsequent TQ clarifications/ MOM/ various correspondences had with you till
date and taking into consideration the clarification/ resolutions/ MOM’s/Amendments had with you till
date in regard to technical and commercial points
Mechanical Mandatory spares As per specification Please refer Volume II General and schedule
Chapter 9 ( 9.00 Air conditioning system) Mandatory spares sheet 51 of 106 ;
Note:
7 1)Any deviation to the list is subject to NTPC approval. 1 Lot - -
2)If any item of mandatory spares declared as not applicable/not quoted by bidder, if found to be
applicable during detail engineering stage then the same shall be supplied by Bidder without any
implication to L&T.
11 Erection (Material issuing, transportation to erection site, Assembly, commissioning and handing over to 1 LS
client) please quote for each model size and capacity separately
Basic Contract Price - Supply (Ex-works) -
In case erection is not in the scope of Bidder, Supervision charges for Erection, Testing &
Commissioning and PG Test at Site (Inclusive of To & Fro Travelling, lodging & boarding and Local
2 7 MD
Conveyance)and Training of Owner's Personnel as per owner's requirement ; Note: PO shall be
amended at same per-diem rate in case services are required beyond 7 MD
Mechanical Recommended spares As per OEM recommendation list (Item wise detail cost break up
3 required ) 1 Lot - -
4 Electrical Recommended spares As per OEM recommendation list (Item wise detail cost break up 1 Lot - -
required )
5 Control & Instrumentation As per OEM recommendation list (Item wise detail cost break up required) 1 Lot - -
6 Extended Warranty Charged beyond agreed DLP (CPBG Extension Charges) 1 Qtr - -
C Remark
1 GST shall be paid extra at actual
2 Custom Duty shall be inclusive in price
Note
1 Total offer Price shall remain firm and fixed basis till the end of the contract. Offer validity shall be 6 months from the date of submission.
2 Items/Quantities as specified/listed/considered above by supplier shall not limit the scope of supply/services of the supplier. Any item and/or Service, Additional Quantities
as required/applicable to satisfy the Technical Specification Requirement shall be part of scope though not explicitly specified/listed/considered and quantified.
Repair/Replacement of material/equipment including to & fro transportation from site to supplier's works shall be taken care by supplier; Note: Acceptance of repair as part
3 of trouble shooting shall be subject to Owner/NTPC approval.
Visits as required from Experts/Supplier's representative/Supplier's Sub-supplier representative for trouble shooting, commissioning of special equipment, analyzers,
4
instruments etc shall be in supplier's scope and included in above price.
5 Any other services required for completion of scope of works for total scope of work shall be deemed inclusive in contract price.
6 Supervision charges are inclusive of to & fro travelling, lodging & boarding and local conveyance. No overtime shall be paid over & above Per-diem rate.
7 All the statutory requirement including Insurance (in the State where the work is being carried out) for supplier's manpower shall be complied and borne by supplier.
8 Man day date shall be counted from date of reporting at site to the date of departure from site (travel time will not be considered for Man day calculation). Further, Holiday
and Weekly off shall not be counted in Man-day Calculation
This price offer is being submitted based on Inquiry specification and subsequent TQ closure. Supplier hereby confirms that, there is no deviation considered in this price
9 offer with respect to TQ closure.
For
If any equipment items are replaced with the alternative arrangments then ,
Sr Description
20 Nos
1 No
1 set
1 Set
1 set
RECOMMENDED SPARES
C& I
A To be listed by Bidders
Electrical
B Motors
1 Terminal plates
2 Heaters
3 Motor of each type and rating
Mechanical
1 To be listed by Bidders
2
3
4
MENDED SPARES
C& I
Qty Price /Unit Total price
lectrical
echanical