Professional Documents
Culture Documents
Designed and Built for Exceptional Compressed air contamination will ultimately lead to:
2
Compressed Air Purification – The perfect choice!
Water Separation – The X-Range of Filtration – The CF-Range of
water separators compressed air filters
The X-range of water separators provide The CF-range of filters efficiently
bulk condensed water and liquid oil removes water and oil aerosols,
removal and are used to protect atmospheric dirt and solid particles, rust,
coalescing filters against bulk pipescale and micro-organisms.
liquid contamination.
0.5 – 45 m³/min*
0.6 – 200 m³/min* 21 – 1590 cfm*
21 – 14885 cfm*
48 – 516 m³/min*
exact balance between air
1702 – 14853 cfm*
quality, energy efficiency * Flow rate at 20° C, 7 bar
”
and low lifetime costs.
3
Energy savings without
compromised performance
4
G Time strip label indicates
A when it’s time to change the
element (CF Grade only)
”
This simple type of automatic drain is used to
discharge the condensate from air tanks, filters, manufacturing efficiencies.
air dryers, etc. It is supplied with manual testing
drain and connection nipple with compensation
tube. Max. Pressure: 16 bar
Maintaining air quality and energy
Manual drain
½” ball valve manual drain.
efficiency through regular
maintenance
Sc-chrom – timed drain
Thanks to the use of a timer that controls Filters are installed to provide contaminant removal to a
interval and duration of operation, this drain specific air quality requirement. The primary reason to
is widely used in compressed air industry. change filter elements is to maintain the air quality, the
Max. Pressure: 16 bar. system efficiency and a low pressure drop. Therefore they
should be replaced every 12 months.
Zero drain
Specifically designed to reduce to zero: The benefits of annual filter
- the air consumption thanks to the
capacitive control; element changes
- the maintenance thanks to the Replacement kit; • Guaranteed optimised performance
- the space for the installation underneath the
• Air quality continues to meet international standards
tank. Max. Pressure: 16 bar
• Protection of downstream equipment, personnel
and processes
• Low operational costs
• Increased productivity and profitability
• Continued piece of mind
6
Technical Data - Compressed Air Condensate Separators - X Series
Separator Connection Size Flow Rate Max. Pressure Dimensions [mm] Weight
Model [m³/min] [cfm] [bar] [psi] [W] [H] [kg]
X005 ³/₈" 0.50 18 17 250 76 175 0.6
X007 ½" 0.66 23 17 250 76 175 0.6
X018 ¾" 1.8 64 17 250 98 230 1.2
X040 1" 4.0 141 17 250 129 268 2.2
X085 1 ½" 8.5 300 17 250 129 268 2.1
X170 2" 17.0 600 17 250 170 467 5.1
X380 3'' 38.0 1342 17 250 205 548 20.0
Flange Housing
X0400 DN100 40 1413 16 232 420 778 40
X0500 DN125 50 1766 16 232 420 784 54
X1100 DN150 110 3885 16 232 524 841 80
X1750 DN175 125 4414 16 232 606 856 116
X2000 DN200 200 7063 16 232 657 848 156
Grade D - Activated Carbon Filtration Grade C - High Efficiency Oil Removal Filtration
Oil vapor and hydrocarbon odor removal, providing Particle removal down to 0.01 micron including water and oil
a maximum remaining oil content of <0.003 mg/m³ aerosols, providing a maximum remaining oil aerosol content
(<0.003 ppm) @ 21°C (Precede with Grade C filter) of 0.01 mg/m3 @ 21°C (Precede with Grade B filter)
Grade B - General Purpose Protection Grade E - General Purpose Dust Filtration
Particle removal down to 0.1 micron including coalesced Dust particle removal down to 1 micron
liquid, water and oil, providing a maximum remaining
oil aerosol content of 0.03 mg/m3 @ 21°C
Operating Limitations:
Max Operating Pressure 17.2 bar g Max Recommended Operating Temp 50°C (Grade D)
Max Recommended Operating Temp 80°C (Grade B, C, E) Min Recommended Operating Temp 1°C
www.compair.com sales@compair.com