Fie Research Institute
22144, Ganganagar P.0., ICHALKARANL 1+
(Dist Kothapur) Mahaashira State‘
im Phone : (0230) 2441475 m@ Fax (0230) 14,
E-mail: f@dataone.in m Websiie- www heyouncn,
ECE
CALIBRATION CERTIFICATE
OF FORCE MEASURING DEVICE
Date of calibration 03/12/2013 Certificate No FRUI2/13«6537
Next calibration due on 03/02/2016 PageNo 4/2
Calibrated for Essjay Technomeasure Pvt. Ltd.
HALT. Road, ichapur,
HOWRAH - 711 104
Customer Reference No. TMICALU13-14IL 080 Dated on 30/11/201
Details of instrument under calibration Instrument Dynamometer
IG No. AWON 100kN.55702
Capacity 100 kN
Type Bow
Dial Gauge Make: Mitutoyo
1 Div 0.01 mm
Dial Gauge No. BAM 649
Fulcrum Pin No. 887
Date of receipt 0312/2013
Mode of calibration Compression
Machine used for calibration }) Hydraulic Multiplication System(NPL-FiE-001)
2) Dead Weight Force Machine(FIE-DWP.003)
Traceabiity }) NPL.Cert.No.12031657/D5.05/C-085 valid upto 07/01 74
2) NPL.Cert.No.12031657/D.5.05IC-0B4 valid upto 0707/1
Dial gauge setting Large pointer at 12 0° Clock position
‘Small pointer at 0 revolution
Temperature 24°C
Correction of temperature variation Apply + 0.027% correction to each reading
for each °C rise oF fall of temperature
‘ade out by using compression pads provided with the force measuring device
3) Prior to each reading, the dial gauge was light tapped on the center of the dial cover
3) The reported uncertainty is at coverage factor k= > which Corresponds toa coverage probabiity