Professional Documents
Culture Documents
Lynx 220 Series
Lynx 220 Series
03
High Speed
Structure
Rapid Traverse
Roller-type LM Guide is mounted on the machine to improve rigidity
and feedrates. Each axis is powered by a maintenance free digital AC
servo motor. These high torque drive motors are connected to the ball
screws without intermediate gears for quiet and responsive slide
movement with virtually no backlash.
04
Main Spindle
The C-axis is positioned in degree increments of 0.001. Through spindle synchronization with the X and Z axes, three dimensional
contouring, complex and prismatic machining can be accomplished.
1 1
10 100 1000 6000 10 100 1000 5000
1500 3500
Spindle speed ( r/min ) 2000 Spindle speed ( r/min ) 11451527 2673
05
Main Spindle Power-torque Diagram
Lynx 220C / LC
Torque : N.m ( ft-lb ) Output : kW ( Hp ) Torque : N.m ( ft-lb ) Output : kW ( Hp )
1000 1000
15 kW 15min, S3 25% 15 kW 15min. S3 25%
11 kW 60min S3 40%
11 kW 60min. S3 40%
167.0 N.m ( 123.2 ft-lb ) 15min, S3 25% .
148.1 N m ( 109.3 ft-lb ) 15min. S3 25%
122.5 N.m ( 90.4 ft-lb ) 60min S3 40% 108.6 N.m ( 80.1 ft-lb ) 60min. S3 40%
100 91.9 N.m ( 67.8 ft-lb ) Cont. Cont. 10 100 81.5 N.m ( 60.1 ft-lb ) Cont. 10 9.2(12.3)
9.2(12.3) Cont.
7.5(10.1) 7.5(10.1)
1 1
10 100 1000 4000 10 100 1000 4500
Spindle speed ( r/min ) 8571142 2000 Spindle speed ( r/min ) 9661288 2255
1 1
10 100 1000 6000 10 100 1000 6000
Spindle speed ( r/min ) 1285
1714
3000 Spindle speed ( r/min ) 112515002625
1
10 100 1000 4500
Spindle speed ( r/min ) 8441125 1969
06
High Productivity
heavy duty turret features a large 210mm diameter curvic coupling and 39 kN of
hydraulic clamp force. The heavy duty design provides unsurpassed rigidity for
heavy stock removal, fine surface finishes, long boring bar overhang ratios, and
extended tool life.
All turret rotations are controlled by high torque servo motor and turret indexing
is non-stop-bi-directional, with a 0.11 second station to station index time.
4
3 ( 4.0 )
.3 ft
( 17
3
m
2 ( 2.7 )
.5 N.
s )
ft-lb 2
T=23
.2
No. of tool stations (5 1.1 kW ( 1.5 Hp )/Cont.
1 ( 1.3 ) .m 1.1
7N 1
T=
Lynx 220MA / MC / LMA /
LMC / LMSA / LMSC 0 0
1000 2000 3000 4000 5000 6000
1500
12 ea ( 24 position index ) Spindle speed ( r/min )
07
Tailstock
Widely spaced guideways and heavy-duty design of the tailstock body ensure
ample rigidity. The tailstock body is positioned by traction bar, which engages with
the carriage. The traction bar movement and hydraulic body clamping are manual.
{ } : option
1
C1, C2-axis index 10 100 1000 6000
360° 1050
1125
5250
08
Operation Convenience
3 PCMCIA Card
Optional Equipment
Chuck air ( or coolant ) blower Collet chuck Chip conveyor Tool pre-setter Signal tower
Work measurement Oil skimmer Part catcher Part conveyor Quick change CAPTO
09
High Performance & Accuracy
More powerful revolving motor is adapted to improve the productivity.
Accuracy
Doosan offers its customers unsurpassed levels of accuracy by applying the latest design techniques and rigorous testing processes.
Roughness Roundness
P - R - W - Profile Leveled Filter ISO 11562 (M1)
Lc / Ls = 300 Lc = 0.800 mm
1.0 90˚
0.07 µm 0.0
0.3µm
( Ra ) [m]
-1.0
Assessment length 4.80 mm Vt = 0.50 mm/s
180˚ 0˚
Material Brass
Cutting Feed mm/rev ( ipr ) 0.025 mm/rev
Cutting Depth mm ( inch ) 0.025 mm
Cutting Speed m/mm ( ipm ) 300 m/min ( 11811.0 ipm ) 1㎛
270˚
Tool Diamond ( Nose R0.1 )
※ This is actual cutting result. It might be not available under certain
circumstances
Center drilling
Material : Carbon steel, SM45C
Ø 30mm Size : ø 62 x 66mm
(1.2 inch) ( ø2.4 x 2.6 inch )
Chip removal rate O.D. threading ( M45 x P1.5 ) 10.4 201 ( 7913.4 ) 1.5
※C
utting time table shown above is the results from real test cutting. The
Carbon steel, SM45C results can be different on cutting condition and strategy.
10
Tooling system
Boring Bar
Boring Bar Sleeves 4ea
ø 10 -H40
ø 12 -H40
ø 16 -H40
O.D Tool
ø 20 -H40
ø 25 -H40 Clamper
ø 32 -H40
6ea
ø40 ( 1.6 ) I.D Tool Holder
Boring Bar ( H40 )
1ea
Drill Sockets
MT#1-H40
Drill MT#2-H40
MT#3-H40 Extended O.D Tool
O.D Tool Holder □25
12st Turret
ø40 ( 1.6 )
1ea
U-Drill
Sleeves
U-Drill ø20 ( 0.8 )
U-Drill Cap
ø25 ( 1.0 ) ( H40 )
ø32 ( 1.3 ) Face Tool
Holder
11
Tooling System
1ea
1ea 2ea
Face Tool U-Drill Sleeves
ø20 -H32 U-Drill
Holder
Holder Cover ø25 -H32
For U-Drill
2ea 1ea
Angular Milling
Head for Face
Cutting Milling Arbor Adapter
1ea
Weldon Adapter
4ea
Dummy Plug
12
Lynx 220LMSA / LMSC Unit : mm ( inch )
Boring Bar
Boring Bar Sleeves I 2ea
Straight Milling
ø10 ( 0.4 ) ø20 ( 0.8 )
ø12 ( 0.5 ) ø25 ( 1.0 ) Unit
ø16 ( 0.6 ) ø32 ( 1.3 ) 1ea
Adapter
Mill Arbor
1ea Weldon
U-Drill Offset Angular
U-Drill Sleeves Collet Chuck
ø20 ( 0.8 ) ø25 ( 1.0 )
Milling Unit
ø32 ( 1.3 ) 1ea
U-Drill Cap
U-Drill Opt.
ø40 ( 1.6 ) CUT-OFF Tool
Holder Cutting Tool
□25
12st
( 24 position index )
1ea
O.D Tool
Small Sleeves 1ea Holder
Boring Bar
for Sub-spindle Double I.D Tool
ø8 ( 0.3 ) ø12 ( 0.5 ) Holder
ø10 ( 0.4 ) ø16 ( 0.6 )
O.D Tool
□25
Boring Bar *2 2ea
Double O.D
ø20 ( 0.8 )
Tool Holder
1ea
1ea
U-Drill Cap Double O.D
Tool Holder
U-Drill *2
ø20 ( 0.8 )
1ea
O.D Tool Face Tool 1ea
□25 Triple I.D Tool
Holder
Holder
13
Working Range
350 ( 13.8 )
350 ( 13.8 )
350 ( 13.8 )
350 ( 13.8 )
350 ( 13.8 )
( A2#5 ) 46 ( 1.8 ) 90 ( A ) ( 3.5 ) ( A2#5 ) 46 ( 1.8 ) 90 ( A ) ( 3.5 ) ( A2#5 ) 46 ( 1.8 ) 90 ( A ) ( 3.5 ) ( A2#5 ) 46 ( 1.8 ) 90 ( A ) ( 3.5 ) ( A2#5 ) 46 ( 1.8 ) 90 ( A ) ( 3.5 ) ( A2#5 ) 46 ( 1.8 )
( A2#6 ) 50 ( 2.0 ) 103 ( B, C ) ( 4.1 )( A2#6 ) 50 ( 2.0 ) 103 ( B, C ) ( 4.1 ) ( A2#6 ) 50 ( 2.0 ) 103 ( B, C ) ( 4.1( )A2#6 ) 50 ( 2.0 ) 103 ( B, C ) ( 4.1 ) ( A2#6 ) 50 ( 2.0 ) 103 ( B, C ) ( 4.1 ()A2#6 ) 50 ( 2.0 )
3 ( 0.1 ) 98 ( 3.9 ) Travel Stroke : 330 [ 550 ] ( 13.0
3 ([ 0.1
21.7 ])) 98 7 ( 3.9 ) Travel Stroke : 330 [ 550 ] ( 13.0 [ 21.7 ] ) 3 (70.1 ) 98 ( 3.9 ) Travel Stroke : 330 [ 550 ] ( 13.03[ 21.7 0.2)) Travel Stroke : 330 [ 550 ] ( 13.0 [ 21.7 ]3) ( 0.1
( 0.1])) 985(( 3.9 5( )0.298) ( 3.9 ) Travel Stroke : 330 [ 550 ] ( 13.0 [ 21.7
3 ( 0.1 ) 987] ) ( 3.9
( 0.3 ) ID Center ( 0.3 ) ID Center ( 0.3 )
35 ( 1.4 )
35 ( 1.4 )
43 (1.7)
50 (2.0)
( 2.0 )
( 2.0 )
( 1.4 )
( 1.4 )
50
50
50 ( 2.0 )
50 ( 2.0 )
X-axis Travel : 175 ( 6.9 )
35
160 ( 6.3 )
160 ( 6.3 )
160 ( 6.3 )
160 ( 6.3 )
80 ( 3.1 ) 80 ( 3.1 ) 15 80 ( 3.1 ) 15 80 ( 3.1 ) 15 80 ( 3.1
15 ( 0.6 )
15 ( 0.6 )
15 ( 0.6 )
26 ( 1.0 )
26 ( 1.0 )
34 ( 1.3 )
18
18 18 ( 0.7 )
15 ( 0.6 ) 15 ( 0.6 ) ( 0.7 ) 15 ( 0.6 ) ( 0.7 ) 15 ( 0.6 ) 15 ( 0.6 )
Quill Travel : 80 ( 3.1 ) Quill Travel : 80 ( 3.1 ) Quill Travel : 80 ( 3.1 ) Quill Travel : 80 ( 3.1 ) Quill Travel : 80 ( 3.1 )
497 [ 717 ] ( 19.6 [ 28.2 ] ) 497 [ 717 ] ( 19.6 [ 28.2 ] ) 497 [ 717 ] ( 19.6 [ 28.2 ] ) 497 [ 717 ] ( 19.6 [ 28.2 ] ) 497 [ 717 ] ( 19.6 [ 28.2 ] )
350 ( 13.8 )
57 ( 2.2 )
50 ( 2.0 )
57 ( 2.2 )
50 ( 2.0 )
43 (1.7)
50 (2.0)
( 1.4 )
43 (1.7)
50 (2.0)
( 1.4 )
50 ( 2.0 )
X-axis Travel : 175 ( 6.9 )
35
50 ( 2.0 )
35
35 ( 1.4 )
35 ( 1.4 )
145 ( 5.7 )
46 ( 1.8 46 ( 1.8 ) 92 ( 3.6 )
30 70 145 ( 5.7 )
30 70 145 ( 5.7 )
14.6
15 ( 0.6 )
15 65 ( 2.6 )
15 65 ( 2.6 )
15 100 ( 3.9 )
15 100 ( 3.9 )
34 ( 1.3 )
( 0.6 ) 75 ( 3.0 )
ø 169 ( 6.7 ) (0.6) 65 ( 2.6 )
(0.6) 65 ( 2.6 )
34 ( 1.3 )
15 105 ( 4.1 )
0 (( 0.6
( 1.2 )( 2.8 )
18 18
( 0.7(0.2) Holder Center ( 0.7 (0.2) Holder Center Holder Center ( 0.7 ) Holder Center
75
( 0.7 ) (0.2)
X-Axis Stroke : 175 ( 6.9 )
) )
( 0.6 )
( 0.6 )
( 0.7 ) 15 ( 0.6 ) ( 0.7 ) 15 ( 0.6 ) 15 ( 0.6 ) 15
15 ( 0.6 ) 15 ( 0.6
22 ) 85 15( 0.622) 85
50 125 ( 4.9 )
50 125 ( 4.9 )
15
Quill Travel : 80 ( 3.1 ) Quill Travel : 80 ( 3.1 ) 15 27 85 Quill Travel : 80 ( 3.1 ) 15 27 85
55 120 ( 4.7 )
0 ( 3.1 ) Quill Travel : 80 ( 3.1()0.6 )( 0.9 ) ( 3.3 ) Quill Travel : 80 ( 3.1 )( 0.6 )( 0.9 ) ( 3.3 ) 15 50 85
( 0.6 ) ( 1.1)( 3.3 ) ( 0.6 ) ( 1.1)( 3.3 )
ø 169 ( 6.7 )
( 6.7 )
ø 169 (6.7)
ø 169 (6.7)
( 0.8 )
( 0.8 )
( 0.6 ) ( 2.0 ) ( 3.3 )
ø 169 ( 6.7 )
.2 ] ) 497 [ 717 ] ( 19.6 [ 28.2 ] ) 497 [ 717 ] ( 19.6 [ 28.2 ] ) 497 [ 717 ] ( 19.6 [ 28.2 ] ) 497 [ 717 ] ( 19.6 [ 28.2 ] ) 497 [ 717 ] ( 19.6 [ 28.2 ] )
ø 16921
21
( 2.0 )
( 2.0 )
( 0.6 )
( 0.6 )
( 2.2 )
8 8
15 15 ( 0.3 ) 15 ( 0.3 ) 15
Quill Stroke : 80 ( 3.1 ) ( 0.6 ) Quill Stroke : 80 ( 3.1 ) ( 0.6 ) Quill Stroke : 80 ( 3.1 ) ( 0.6 ) Quill Stroke : 80 ( 3.1 ) ( 0.6 ) Quill Stroke : 80 ( 3.1 )
[ 717 ] ( [ 28.2 ] ) [ 717 ] ( [ 28.2 ] ) [ 717 ] ( [ 28.2 ] ) [ 717 ] ( [ 28.2 ] ) [ 717 ] ( [ 28.2 ] )
( 3.3 )
175 83
83
175
( 6.9 )
( 6.9 )
372 (
15 105 ( 4.1 ) 400 ( 15.7 )
) )
46 [ 50 ] 91 [ 111 ] 46 [ 50372
] 91( 14.6
[ 111 ]) 372 ( 14.6
178 ()7.0 ) 178 ( 7.0 ) 46 [ 50 ] 91 [ 111 ] 46 [ 50 ] 91360
[ 111( 14.2
] ) 360 190
( 14.2( 7.5
) ) 190 ( 7.5 )
( 15.7
225
225
400 ( 15.7 )
400 ( 15.7 )
( 8.9 )
145 ( 5.7 )
( 1.8 [ 2.0 ] 46
) ( 3.6 92] )( [3.6
( 1.8[)4.4
( 1.8 2.0)] ) ( 3.6 [ 4.4 ] ) 46 ( 1.8 ) 92 ( 3.6 ) ( 1.8 [ 2.0 ])( 3.6 [ 4.4( 1.8
]) [ 2.0 ])( 3.6
( 5.7
65 ( 2.6 ) 145 ( 5.7 )
12.5
12.5
55 150 ( 5.9 ) 37.5
2.6))
( 2.6 )
( 1.5 )
( 1.5 )
65
( 0.5) )
46 [ 50 ] 91 [ 111 ] 46 [ 50 ] 91
((0.5
65 ( 2.6 ) ( 1.2 )
1.4 )( 3.0 ) 30
30
175 ( 6.9 )
24 57 24 57 24 57 24 57
6.9 )( 14.6 )
370 ( 14.6 )
15 65 ( 2.6 )
15 65 ( 2.6 )
( 0.6 ) 75 ( 3.0 )
) 35 ( 4.1 )
119 ( 4.7 )
Single ID Single ID
65 ( 2.6 )
15 85 ( 3.3 )
8.1))
5
109 ( 4.3 )
< X-Axis Stroke > 205 ( 8.1 )
119 ( 4.7 )
119 ( 4.7 )
109 ( 4.3 )
109 ( 4.3 )
X-Axis Stroke : 175 ( 6.9 )
65 ( 2.6 )
( 0.8 ) ( 6.7 [ 10.0 ] )
( 6.7 [ 10.0 ] )
85 ((3.3
65 ((2.6
21 ø 169 [ 254 ]
ø 169 [ 254 ]
Single ID Single ID
( 1.2 )( 3.0 )
Holder Center
ø 169 [ 254 ]
Holder Center
( 6.7 [ 10.0 ])
( 1.2) )( 3.0 )
Holder Center
ø 135 ( 5.3 )
ø 135 ( 5.3 )
25 112.5
( 1.0 ) ( 4.4 )
1.0 )) ( 4.4 )
(0.2)
X-Axis Stroke : 175 ( 6.9 )
135 ( 5.3 )
135 ( 5.3 )
X-Axis Stroke : 175 ( 6.9 )
30( 1.475)
X-Axis Stroke : 175 ( 6.9 )
35
( 2.2 ) 2515( 2.2105
Holder Center
( 0.6 )
Holder Center
( 6.7 ) ( 0.6 )
15 160 ( 6.3 )
( 0.6)37.5
( 1.0 )37.5
15 22 85
(0.6)
( 1.5 )
15 22 85
( 2.2 )
55 120 ( 4.755
( 1.5
35 140 ( 5.5 )
( 1.225
35 140 ( (5.5
)
15 22 85
(30
30
)
5)) ( (2.0
1.9)) ( 3.3 ) 5 3.3 ) 53 5 101 53 5 ( 0.6 )( 0.9 )( 3.3 )
ø 169 (6.7)
(1< X-Axis
( 2.2 )
( 0.6 )
160 ( 6.3 )
5 80 5 80
( 3.3 )
83
10.5
10.5
68 [ 64 ] ( 2.768 [ 64] )] ( 2.7
[ 2.5 550[ 2.5 ] ) ) 550
( 21.7 < Z-Axis Stroke
( 21.7 > ( 0.2Stroke
) < Z-Axis ) ( 3.1
> )( 0.2 ) ( 3.1 ) 84.5 [ 3.3 ] 91
84.5
[ 3.2[ 3.3
] ] 91 [ 3.2550
] ( 21.7 ) 550
< Z-Axis
( 21.7
Stroke
) < Z-Axis ( 0.4>)
> Stroke ( 0.4 )
( 6.3 )
( 6.3 )
( 3.5 ) 160
160
400 ( 15.7 )
80 ( 3.1 ) 80 ( 3.1 )
400 ( 15.7 )
400 ( 15.7 )
400 ( 15.7 )
( 8.9 )
( 1.5 )
( 1.5) )
37.5
37.5
( 0.1 )
( 0.1 )
2.5
2.5
90
90
( 1.2 )
( 1.2 )
30
30
172.5 ( 6.8 )
24 57 24 57
150 ( 5.9 )
109 ( 4.3 )
109 ( 4.3 )
119 ( 4.7 )
119 ( 4.7 )
205 ( 8.1 )
205 ( 8.1 )
25 30.5 97 ( 3.8 )
109 ( 4.3 )
119 ( 4.7 )
119 ( 4.7 )
205 ( 8.1 )
205 ( 8.1 )
( 5.3 )
ø 135 ( 5.3 )
109 ( 4.3 )
109 ( 4.3 )
119 ( 4.7 )
119 ( 4.7 )
ø 169 [ 254 ]
ø 169 [ 254 ]
( 6.7 [ 10.0 ])
( 6.7 [ 10.0 ])
( 0.9 ) ( 4.1 )
( 0.9 ) ( 4.1 )
105
2530.5 97
2530.5 97
ø 169 [ 254 ]
ø 169 [ 254 ]
(6.7 [ 10.0 ] )
(6.7 [ 10.0 ] )
)( 1.2 )>
ø 135 ( 5.3 )
ø 135 ( 5.3 )
( 1.0 ) )
< X-Axis( 1.0Stroke
22.5 ø 135
1.2
( 2.2 )
( 2.2 )
55
55
< X-Axis Stroke >
74 80 74 805 5
22.5
14
35 ( 1.4
35 ( 1.4
43 (1.7
50 (2.0
( 2.0
50
( 2.0
50
50 ( 2.0 )
X-axis Travel : 175 ( 6.9 )
( 1.4
50 ( 2.0 )
X-axis Travel : 175 ( 6.9 )
( 1.4
35
35
160 ( 6.3 )
160 ( 6.3 )
160 ( 6.3 )
160 ( 6.3 )
80 ( 3.1 ) 80 ( 3.1 ) 15 80 ( 3.1 ) 15 80 ( 3.1 ) 15 80 ( 3.1 )
15 ( 0.6 )
15 ( 0.6 )
15 ( 0.6 )
15 ( 0.6 )
26 ( 1.0 )
26 ( 1.0 )
34 ( 1.3 )
18
18 18
( 0.7 )
15 ( 0.6 ) 15 ( 0.6 ) ( 0.7 ) 15 ( 0.6 ) ( 0.7 ) 15 ( 0.6 ) 15 ( 0.6 )
Quill Travel : 80 ( 3.1 ) Quill Travel : 80 ( 3.1 ) Quill Travel : 80 ( 3.1 ) Quill Travel : 80 ( 3.1 ) Quill Travel : 80 ( 3.1 )
497 [ 717 ] ( 19.6 [ 28.2 ] ) 497 [ 717 ] ( 19.6 [ 28.2 ] ) 497 [ 717 ] ( 19.6 [ 28.2 ] ) 497 [ 717 ] ( 19.6 [ 28.2 ] ) 497 [ 717 ] ( 19.6 [ 28.2 ] ) 497 [
350 ( 13.8 )
350 ( 13.8 )
350 ( 13.8 )
57 ( 2.2 )
57 ( 2.2 )
50 ( 2.0 )
50 ( 2.0 )
43 (1.7)
43 (1.7)
50 (2.0)
50 (2.0)
( 1.4 )
( 1.4 )
35
35) ( 1.4 )
35 ( 1.4 )
Turret Center Turret Center Turret Center Turret Center
160 ( 6.3 )
153 ( 6.0 )
15 ( 0.6 ) 117 ( 4.6 )
132 ( 5.2 )
132 ( 5.2 )
15 ( 0.6 ) 117 ( 4.6
( 0.6 ) 62 ( 2.4 )
) 46 ( 1.8 ) 92 ( 3.6 ) 46 ( 1.8 ) 92 ( 3.6()0.6 ) 80 ( 3.1 ) ( 0.6 ) 80 ( 3.1 )
92 ( 3.6 ) 92 ( 3.6 ) 40 80 ( 3.1 ) 40 80 ( 3.1 )
145 ( 5.7 )
46 ( 1.8 ) 46 ( 1.8 ) 46 ( 1.8 ) 92 ( 3.6 ) 46 ( 1.8 ) 92 ( 3.6 )
30 70 145 ( 5.7 )
30 70 145 ( 5.7 )
370 ( 14.6 )
1.3)) )
15 ( 0.6 )
7034(((14.6
34 ( 1.3 )
15 65 ( 2.6 )
) ( 6.7 ) 15 65 ( 2.6 )
15 100 ( 3.9 )
(0.6) 65 ( 2.6 )
( 0.6 ) 75 ( 3.0 )
(0.6) 65 ( 2.6 )
18 ( 0.7 (0.2)
) Holder Center ( 0.7(0.2)
) Holder Center ( 0.7 ) ( 0.7 )
Holder Center Holder Center
30 75
(0.2)
X-Axis Stroke : 175 ( 6.9 )
X-Axis Stroke : 175 ( 6.9 )
15 3100
( 0.6 )
( 0.6 )
15 ( 0.6 ) 15 ( 0.6 ) 50 125 ( 4.9 ) 15 ( 0.6 ) 15 ( 0.6 )
50 125 ( 4.9 )
15 22 85 15 22 85
Quill Travel : 80 ( 3.1 ) Quill Travel : 80 ( 3.1 ) 15 27 85 Quill Travel : 80 ( 3.1 )15 27 85 Quill Travel : 80 ( 3.1 )( 0.6 )( 0.9 ) ( 3.3 ) Quill Travel : 80 ( 3.1( 0.6
) )( 0.9 ) ( 3.3 )
55 120 ( 4.7 )
15 50 85
497 [ 717 ] ( 19.6 [ 28.2 ] ) ( 0.6 ) ( 1.1)( 3.3 ) [ 717 ] ( 19.6 [ 28.2 ] ) ( 0.6 ) ( 1.1)( 3.3 )
ø 169 ( 6.7 )
ø 169 (6.7)
( 0.8 )
( 0.8 )
497 [ 717 ] ( 19.6 [ 28.2 ] ) 497 ( 0.6 ) ( 2.0 ) ( 3.3 )
69) ( 6.7 )
ø 169 ( 6.7 )
21
21
169
( 2.0 )
( 0.6 )
ø(12.0
( 0.6
8 8
ø
15 15 ( 0.3 ) 15 ( 0.3 ) 15
Quill Stroke : 80 ( 3.1 ) ( 0.6 ) Quill Stroke : 80 ( 3.1 ) ( 0.6 ) Quill Stroke : 80 ( 3.1 ) ( 0.6 ) Quill Stroke : 80 ( 3.1 ) ( 0.6 ) Quill Stroke : 80 ( 3.1 ) (
[ 717 ] ( [ 28.2 ] ) [ 717 ] ( [ 28.2 ] ) [ 717 ] ( [ 28.2 ] ) [ 717 ] ( [ 28.2 ] ) [ 717 ] ( [ 28.2 ] )
30 75 145 ( 5.7 )
370 ( 14.6 )
15 65 ( 2.6 )
75 ( 3.0 )
( 0.6 ) 75 ( 3.0 )
15 105 ( 4.1 )
Single ID Single ID
370 ( 4.1
Single ID Single ID
65 ( 2.6 )
65 ( 2.6 )
15 85 ( 3.3 )
5 5
X-Axis Stroke : 175 ( 6.9 )
Single ID Single ID
( 1.2 )( 3.0 )
Holder Center Holder Center (0.2) (0.2) Holder Center Holder Center
X-Axis Stroke : 175 ( 6.9 )
15 105
85 15 22 85
(0.6)
(0.6)
35 140 ( 5.5 )
35 140 ( 5.5 )
55 120 ( 4.7 )
55 120 ( 4.7 )
15 22 85 15 22 85
ø 169 (6.7()0.6 )
(1.4)
( 0.6 )
( 2.2 )
( 2.2 )
ø(169
8
15 ( 0.3 ) 15 15 15 15 15
( 0.6 ) Quill Stroke : 80 ( 3.1 ) ( 0.6 ) Quill Stroke : 80 ( 3.1 ) ( 0.6 ) Quill Stroke : 80 ( 3.1 ) ( 0.6 ) Quill Stroke : 80 ( 3.1 ) ( 0.6 ) Quill Stroke : 80 ( 3.1 ) ( 0.6 )
[ 717 ] ( [ 28.2 ] ) [ 717 ] ( [ 28.2 ] ) [ 717 ] ( [ 28.2 ] ) [ 717 ] ( [ 28.2 ] ) [ 717 ] ( [ 28.2 ] )
46 ( 1.8 ) 92 ( 3.6 )46 ( 1.8 ) 92 ( 3.6 ) 46 ( 1.8 ) 92 ( 3.6 ) 46 ( 1.8 ) 92 ( 3.6 ) 46 ( 1.8 ) 92 ( 3.6 ) 46 ( 1.8 ) 92
65 ( 2.6 ) 145 ( 5.7 )
14.5 50.5 ( 2.0 ) 145 ( 5.7 )
) 145 ( 5.7 )
14.5 50.5 ( 2.0 ) 145 ( 5.7 )
Single ID Single ID
( 2.0
( 2.6 )
( 0.6 ) ( 2.0 )
( 0.6 ) ( 2.6 )
15 (50.5
65 ( 2.665
6.9 )
( 0.6 ) 65
( 0.6 ) ( 2.6 )
( 0.6()2.6
) 65
15
31
174.5
15 45
( 6.9 )
31
174.5
15 45
( 6.9 )
15 160 ( 6.3 )
ø 169 ( 6.7 )
ø 169 ( 6.7 )
ø 169 ( 6.7 )
ø 169 ( 6.7 )
( 1.1 )
28
( 0.0 )
( 1.1 )
28
0.5
( 0.0 )
( 0.6 )
0.5
( 0.6 )
15 15 15
Quill 15
Quill Stroke : 80 ( 3.1 ) Stroke :(80
0.6( 3.1
) ) ( 0.6 ) Quill
Quill Stroke : 80 ( 3.1 ) Stroke :(80
0.6() 3.1 ) ( 0.6 )
[ 717 ] ( [ 28.2 ] ) [ 717 ] ( [ 28.2 ] ) [ 717 ] ( [ 28.2 ] ) [ 717 ] ( [ 28.2 ] )
46 ( 1.8 ) 92 ( 3.6 )
3 78 Z-Axis Stroke : 330 [ 550 ] ( 13.0 [ 21.7 ] ) 15
60 145 ( 5.7 )
Holder Center
15 15 85
160 ( 6.3 )
( 1.0 )
26
( 0.6 )
15
50
(1.4)(2.6)
50
15 (0.6)
xis Stroke : 255 (10.0)
22 (0.9)
30 225.0
30 225.0
(1.2) (8.9)
22 (0.9)
30 225.0
30 225.0
95.0 160.0
(1.2) (8.9)
(3.7) (6.3)
95.0 160.0
(3.7) (6.3)
15
254 (10")
254 (10")
254 (10")
25 5.0
(0.2)
92 (3.6)
62 (2.4)
254 (10")
254 (10")
254 (10")
25 5.0
(10.0)
(10.0)
(10.0)
92 (3.6)
62 (2.4)
(10.0)
(10.0)
(10.0)
X-Axis
(1.0)
42.5 50 42 48 42 48
42.5
Quill Travel : 120 (4.7) 50 (1.7) (2.0) Quill Travel : 120 (4.7)
Tool Interference Diagram
Ø213.7
( 8.4 )
Ø40 ( 1.6 ) Ø177.4 Ø506 ( 19.9 )
( 7.0 ) ( MAX.TOOL SWING )
SLIDE COVER
Ø320 ( 12.6 )
35 ( 1.7 )
( 1.4
A
43
Ø177.4
( 7.0 )
5
( 1.0 )
25
( 0.2 )
Ø177.4
( 7.0 )
Ø164.1 ( 6.5 )
Ø177.4
( 7.0 )
Ø148.8 ( 5.9 )
Ø 213.1 ( 8.4 ) 160 ( 6.3 ) 15 ( 0.6 )
175 ( 6.9 ) 35 ( 1.4 ) 175 ( 6.9 ) ( X-AXIS TRAVEL )
370 ( 14.6 ) Ø 195.5
( 7.7 )
Ø 503.7 ( 19.8 )
SLIDE COVER ( MAX. TOOL SWING )
Ø 320 ( 12.6 )
( MAX. TURNING DIA. )
Ø100.2
( 3.9 )
20 ( 0.8 )
Ø99.6
( 3.9 )
6.2
( 0.2 )
)
0.5
Ø25 5
( 2.0 2
Ø1
( 1.0 )
t2 )
Ø95.1
SLIDING COVER ( 3.7 )
Ø32
51 ( 2.0 )
2-Ø20 ( 0.8 ) B
30 ( ( 1.3
1.2 ) D )
( 0.2 )
( 2.2 ) ( 1.8 )
4.2
160
55 45
( 6.3
( 1.2
30 ) ( 2.4
C ) 3-Ø20 ( 0.8 )
65 ( 400
60 )
A A
34 ( 1.3 )
2.4 ) 60 30 Ø551 ( 21.7 )
Ø40 ( 1.6 ) 60 ( ( 2.4 ) ( 1.2 )
5 )
( 0.2
)
( 2.0
51
65 ) ( 1.2
( 2.6
.0 )
2(2
30 )
0.8 ) 5
20 (
7)
11.
642
(
(
25. 335
296
3) ( 13.
2)
65 (
2.6 )
16
External Dimensions
HOLE
410 ( 16.1 )
410 ( 16.1 )
1650 ( 65.0 )
1210 ( 47.6 )
1210 ( 47.6 )
991.5 ( 39.0 )
800 ( 31.5 )
Conveyor Conveyor
Unit : mm ( inch )
410 ( 16.1 )
410 ( 16.1 )
1210.1 ( 47.6 ) [ 1210 ( 47.6 ) ]
1210.1 ( 47.6 ) [ 1210 ( 47.6 ) ]
1210 ( 47.6 )
1210 ( 47.6 )
1650 ( 65.0 )
1650 ( 65.0 )
991.5 ( 39.0 )
991.5 ( 39.0 )
800 ( 31.5 )
800 ( 31.5 )
Side Chip
Side Chip Rear Chip
Rear Chip
Conveyor
Conveyor Conveyor
Conveyor
2667.42667.4
( 105.0
( 105.0
) )
619.7 ( 24.4 )
410 ( 16.1 )
410 ( 16.1 )
410 ( 16.1 )
410 ( 16.1 )
1655.7 ( 65.2 )
1655.7 ( 65.2 )
1276.1 ( 50.2 )
1276.1 ( 50.2 )
1286.5 ( 50.6 )
1286.5 ( 50.6 )
1036 ( 40.8 )
1036 ( 40.8 )
CEFJIH
A
B
CEFJI
D
G
866.1 ( 34.1 )
866.1 ( 34.1 )
AHB
D
GA
AHB
D
GA
876.5 ( 34.5 )
876.5 ( 34.5 )
A JIH
A JIH
G
G
FED
FED
B
B
C
JIH
G
G
FED
FED
B
B
C
17
Machine Specifications
• The specifications and information above-mentioned may be changed without prior notice.
• For more details, please contact Doosan
18
NC Unit Specifications
DOOSAN-FANUC i Series
AXES CONTROL AUXILIARY / SPINDLE SPEED FUNCTION
- Controlled axes X, Z ( Lynx 220 ) - Spindle orientation - Current position display
X, Z, C ( Lynx 220M / LM ) - Actual spindle speed output - Directory display and punch for each group
X, Z, C, A, B ( Lynx 220LMSA / LMSC ) - Auxiliary function lock - Directory display of floppy cassette
- Cs contouring control * - Constant surface speed control - Display of spindle speed and T code at all screens
- Simultaneous controlled axes - High speed M / S / T interface - External message display
4 axes ( Lynx 220 / M / LM / LMSA / LMSC ) - M - code function M3 digits - Help function
- Axis control by PMC - Rigid tapping - Multi - language display
- Backlash compensation for each rapid traverse and cutting feed - S - code function S4 / S5 digits - Operation history display
- Chamfering on / off - Spindle serial output S4 / S5 digits - Parameter setting and display
- Emergency stop - Spindle speed override 0 - 150 % - Program name display 31 characters
- Follow-up - Spindle Output switching - Run hours / parts count display
- HRV2 control - Self-diagnosis function
- Inch / Metric conversion PROGRAM INPUT - Servo setting screen
- Increment system 1/10 0.0001 / 0.00001 mm/inch - Absolute / incremental programming - Spindle setting screen
- Interlock All axes / each axis - Addition of custom macro common variables - Status display
- Least input command 0.001 / 0.0001 mm/inch - Automatic coordinate system setting - Operating monitor screen
- Machine lock All axes / each axis - Canned cycle for drilling / Turning - Soft operator's panel
- Mirror image - Canned cycle - Tool path graphic display
- Overtravel - Circular interpolation by R programming
- Position switch - Control in / out DATA INPUT / OUTPUT
- Servo off - Coordinate system setting G50 - External data input
- Stored stroke check 1 - Coordinate system shift - External key input
- Stored stroke check 2, 3 - Custom macro - External program input
- Torque control - Decimal point programming - External program number search
- Unexpected disturbance torque detection function - Pocket calculator type decimal point programming - External work number search
- Stroke limit check before move - Diameter / radius programming ( X axis ) - Memory card input / output
- Direct drawing dimension programming - Reader / puncher interface CH1.interface
OPERATION - Direct of coordinate system shift - RS232C interface
- Automatic operation ( memory ) - G code system A / B / C - Automatic data backup
- Buffer register - Input unit 10 time multiply
- DNC operation ( Reader / puncher interface is required ) - Label skip
- Dry run - Manual absolute on and off OTHERS
- Handle incremental feed X1, X10, X100 - Maximum program dimension ± 9 digit - Cycle start and lamp
- Manual Handle interruption - Multiple repetitive canned cycle G70 - G76 - Display unit 8.4" Color LCD
- JOG feed - Multiple repetitive canned cycle II - Feed hold and lamp
- Manual handle feed 1 unit - Optional block skip 1 piece - NC and servo ready
- Manual intervention and return - Parity check - PCMCIA port in the front of LCD display unit
- Manual pulse generator 1 ea - Pattern data input - PMC system0iD
- Manual reference position return - Plane selection G17, G18, G19 - Reset / rewind
- MDI operation - Program number O4 digit
- Program number search - Program stop / end ( M00, M01 / M02, M30 ) OPERATION GUIDANCE FUNCTION
- Program restart - Programmable data input G10 - Manual Guide 0i
- Sequence number search - Sequence number N5 digit
- Single block - SUB program call 10 folds nested
INTERFACE FUNCTION
- Wrong operation prevention - Tape code : ISO / EIA auto recognition EIA RS422 / ISO840
- Ethernet function Embedded ethernet
- Reference position shift - Tape format for FANUC Series10 / 11
- Refernce position setting without dog - Work coordinate system G52 - G59
- Interruption type custom macro OPTIONAL SPECIFICATIONS
INTERPOLATION FUNCTIONS - Work coordinate system preset
- Nano interpolation AXIS CONTROL
- 1st. reference position return Manual, G28 TOOL FUNCTION / TOOL COMPENSATION - Controlled axes expansion ( total ) Max.4 axes
- 2nd. reference position return G30 - Automatic tool offset - Simultaneous controlled axes expansion ( total ) Max.4 axes
- 3rd/4th. reference position return G30 - Direct input of offset value measured
- Circular interpolation G02 - Direct input of offset value measured B
FEED FUNCTION
- Continuous threading - T - code function T2 + 2 digits - Advanced preview control
- Dwell ( per sec ) G04 - Tool geometry / wear compensation
- High speed skip - Tool life management
- Linear interpolation G01 - Extended tool life management INTERFACE FUNCTION
- Multiple threading - Tool nose radius compensation - Fast ethernet / Data server
- Positioning G00 - Tool offset G43, G44, G49
- Reference position return check G27 - Tool offset 7 digits OPERATION
- Thread cutting / Synchronous cutting - Tool offset pairs 64 pairs - Manual handle feed 2 units
- Thread cutting retract - Tool offset value counter input
- Torque limit skip
OTHERS
- Variable lead threading EDITING OPERATION - 10.4" Color TFT LCD
- Back ground editing - Ez guide I ( only with 10.4" color TFT LCD option )
FEED FUNCTION - Extended part program editing
- Automatic acceleration / deceleration - Memory card edit & operation
- Cutting feedrate clamp - Number of registered programs 400 ea ROBOT INTERFACE
- Feed per minute - Part program editing - Robot interface with PMC I / O module
- Feed per revolution - Part program storage length 1280 ( 512kB ) m ( Hardware between PMC I / O mudules )
- Feedrate override ( 10% unit ) 0 - 200 % - Play back - Robot interface with PROFIBUS-DP
- Jog feed override ( 10% unit ) 0 - 2000 mm/min - Program protect Note : * : Lynx 220M / LM
- Manual per revolution feed
- Override cancel SETTING AND DISPLAY
- Rapid traverse override F0, 25, 100 % - Actual cutting feedrate display
- Rapid traverse rate - Alarm display
- Tangential speed constant control - Alarm history display
19
Major Specifications
Lynx 220 series Description Unit Lynx 220 [L] Lynx 220M [LM] [LMS]
www.doosanmachinetools.com
www.instagram.com/doosan_machinetools
www.facebook.com/doosanmachinetools
www.youtube.com/c/DoosanMachineToolsCorporation
Head Office Doosan Machine Tools Europe Doosan Machine Tools China
22F T Tower, 30, Sowol-ro 2-gil, Jung-gu, Emdener Strasse 24, D-41540 Dormagen, Room 101,201,301, Building 39 Xinzhuan
Seoul, Korea, 04637 Germany Highway No.258 Songjiang District,China
Tel +82-2-6972-0370 / 0350 Tel +49-2133-5067-100 Shanghai(201612)
Fax +82-2-6972-0400 Fax +49-2133-5067-111 Tel +86 21-5445-1155
Fax +86 21-6405-1472
Doosan Machine Tools America Doosan Machine Tools India
19A Chapin Rd., Pine Brook, NJ 07058, U.S.A. No.82, Jakkuar Village, Yelahanka Hobil,
Tel +1-973-618-2500 Bangalore-560064
Fax +1-973-618-2501 Tel + 91-80-2205-6900
E-mail india@doosanmt.com
Fire Safety There is a high risk or fire when using non-water-soluble cutting fluids, processing flammable materials, neglecting use coolants and modifying
Precautions the machine without the consent of the manufacturer. Please check the SAFETY GUIDANCE carefully before using the machine.
ver. EN 190613 SU