Professional Documents
Culture Documents
S 223.1061 - 1 en-US
06/02/2015 10:19:16
Introduction
This publication is copyright of Sandvik – © Sandvik 2014.
It must not be copied*, reproduced or otherwise made available in full or in part to any third party
without Sandvik's prior written consent.
* The maintenance checklists in the Maintenance Instructions and Operator's Instructions may be
copied solely for maintenance purposes of Sandvik equipment.
Sandvik
Stationsplan, SE-233 81 Svedala, Sweden
Tel: +46 (0)40 409000, Fax: +46 (0)40 409260
www.sandvik.com
WARNING
IGNORING INSTRUCTIONS HAZARD
Copyright © Sandvik
S 223.1061 - 1 en-US 06/02/2015 10:19:16 3
This page is intentionally left blank
Copyright © Sandvik
4 S 223.1061 - 1 en-US 06/02/2015 10:19:16
Table of contents
1. Introduction
1.1. Equipment information...................................................................8
1.1.1. Manufacturer...................................................................... 8
1.1.2. For maintenance................................................................ 8
1.1.3. Crusher identification......................................................... 8
1.1.3.1. Location of the crusher's identification plate.......... 8
1.1.3.2. Content of the crusher's identification plate........... 9
1.1.4. Tank unit identification......................................................10
1.1.4.1. Location of the tank unit's identification plate...... 10
1.1.4.2. Content of the tank unit's identification plate....... 10
1.1.5. Directives and standards..................................................10
1.1.6. About the manual............................................................. 11
1.1.6.1. Illustrations........................................................... 11
1.1.6.2. Conventions......................................................... 11
1.1.6.3. Feedback............................................................. 12
1.1.6.4. Copyright notice...................................................12
1.1.6.5. Trademarks and acknowledgements................... 12
Copyright © Sandvik
S 223.1061 - 1 en-US 06/02/2015 10:19:16 5
Table of contents
Copyright © Sandvik
6 S 223.1061 - 1 en-US 06/02/2015 10:19:16
1. Introduction
Copyright © Sandvik
S 223.1061 - 1 en-US 06/02/2015 10:19:16 7
1. Introduction
1.1.1. Manufacturer
This Sandvik equipment has been manufactured by:
Sandvik SRP AB
SE-233 81 Svedala
Sweden
www.sandvik.com
Copyright © Sandvik
8 S 223.1061 - 1 en-US 06/02/2015 10:19:16
1. Introduction
1 9
8
2
3
4 5 6 7
1 Type
2 Serial number
3 Local manufacturing number
4 Order number
5 Mass (kg)
6 Max. operating speed
7 Manufacturer
8 Year of manufacture
9 CE mark
10 11 12 13 14 15 16
Copyright © Sandvik
S 223.1061 - 1 en-US 06/02/2015 10:19:16 9
1. Introduction
8
1
2 7
3 4 5 6
1 Machine type
2 Serial number/PCR
3 Local manufacturer number
4 Mass (kg)
5 Order number
6 Manufacturer
7 Maximum operating speed
8 Year of manufacture
Copyright © Sandvik
10 S 223.1061 - 1 en-US 06/02/2015 10:19:16
1. Introduction
Sound levels
The sound intensity levels have been measured according to the
following standard.
ISO 9614-2 Determination of sound power levels of noise sources using sound intensity -- Part
2: Measurement by scanning
When ordering manuals, always specify the language and quote the
equipment's serial number.
1.1.6.1. Illustrations
Some illustrations in this manual are for reference purposes only.
Details of little or no importance can differ from your equipment.
1.1.6.2. Conventions
The following conventions are used throughout this manual:
Callout references are written in brackets in the body text, e.g. "Check
the air vent filter (1)."
Designations are set in boldface, e.g. "Check the return oil screen
OS1.". These designations are also used the Piping and
Instrumentation Diagrams (PID).
Copyright © Sandvik
S 223.1061 - 1 en-US 06/02/2015 10:19:16 11
1. Introduction
Copyright © Sandvik
12 S 223.1061 - 1 en-US 06/02/2015 10:19:16