Professional Documents
Culture Documents
Allround Scaffolding
L i m i t l e s s .
Layher Allround Technology
S t r o n g .
Z-8.22-64, Z-8.22-64.1
Quality management
certified according to
ISO 9001:2008
by German TÜV-CERT
I n g e n i o u s .
More possibilities. Quickly erected with safety.
2
– and its ingenious Allround technology
The »Original« Layher Allround Connections in this quick to assemble Layher Allround Scaffolding has
Scaffolding® and spannerless scaffolding system become a by-word on the market for
For demanding and complex scaf- make a unique combination: providing both modular scaffolding and out-
folding applications – i. e. wherever structural strength immediately on standing quality.
conventional scaffolding technology assembly and subsequent ultimate
falls short of optimal thus cost effec- force transmission while offering a Layher Allround Scaffolding is an
tive use, Layher Allround Scaffold- choice of automatically right-angled investment in a perfected and com-
ing convincingly comes in with an or splayed connections with unrival- plete system – in steel or aluminium
unmatched range of advantages: led safety right from the start. – with all the necessary approvals,
unbeatably fast assembly, persua- and rapid, safe, highly versatile and
sive economic arguments and an continually profitable scaffolding
extensive range of series-produced construction.
accessories. This and more is avail
able thanks to allround versatility
from one system.
3
More possibilities. Unique connection technology.
For industry, chemical plants, power For very difficult ground plans and
stations, aircraft hangars, shipyards, anchoring conditions, for very irregular
theatres and arenas, at any site or structures, and for jobs with increased
facility, the “Original” does full justice to safety requirements.
its reputation as an all-rounder.
As work and protective scaffolding at the
facade, as birdcage, tower and suspended
scaffolding, or as a rolling tower – the
right scaffolding at all times and for all
jobs and requirements.
Structural assembly from the . . . the component is A blow with a hammer The flat rosette without
beginning: By sliding the wedge immediately secured on the wedge transforms recesses or raised edges
head over the rosette and against any possibility the connection from prevents clogging with con-
inserting the wedge into of shifting or dropping out. structural assembly to crete, sprayed foam, dirt etc.
one of the holes . . . That means: force transmitting rigidity. that might otherwise hamper
safe 1-man-assembly, assembly.
whatever the height.
Quality management
certified according to
ISO 9001:2008
by German TÜV-CERT
Member of IIOC.
D B NL CZ SQ E F H
NF
Allround modular Allround Modular System
in steel: system in steel: in steel: in steel:
Z-8.22.64 235/032/2010 A34 / 000006 A
G-215/91
Approval for
Approval for
Allround components: Approval for
Approval for Allround modular Approval for
Allround VGS – L 10 Allround Connector regular assembly
system:
Connector and regular assembly: in steel:
00001/115/2010
in aluminium: 07 P G-215/91
Z-8.22-64.1
Further approvals and type testing in many other countries, accessible by the user whenever required.
4
ible.
I N S PL RUS UKR
Approval for Norway: Approval for the Allround Approval for the Allround
Allround Modular System Approval for System in steel and aluminium: System in steel:
in steel: regular POCC DE.AB34.B00212 UA 1.082.0053930-10
20036/OM-4 assembly in steel: 76/02
and extensions
Sweden: Approval for
Approval for regular Approval for the Allround
assembly in steel Allround Connector system in
Allround: 154801 in steel: aluminium:
Approval for regular B/02/003/07 UA 1.082.0053933-10
assembly in aluminium
Allround: 154806
More possibilities. Unique connection technology.
Module System
Allround Steel
General Building Authority Approval Z-8.22-64
Certification according to
DIN ISO 9001/EN 29001
by German TÜV-CERT
Z-8.22-64
Z-8.22-64.1
Possible applications in which the speci- A a support base insufficient to with- Other outstanding arguments in favour of
fic advantages of the Layher Allround stand the forces from a steel scaffold using Layher’s Allround in its aluminium
Scaffolding systems made of aluminium ing structure version are:
can be used to particular advantage in A historic natural masonry requires refur-
A faster assembly
terms of both profitability and design ele- bishing, but is crumbling under the
A low loading weight
gance include effects of the environment and hence
A less physical strain on the assembly
is unable to bear the weight of steel
A rolling towers personnel.
scaffolding.
A suspended scaffolding
A scenery in theatres A Layher Allround in aluminium can be
A for trade fairs and events These are possible scenarios where used in conjunction with Layher Allround
the use of Layher’s Allround aluminium in steel, as both systems are compatible.
system is ideal.
7
Allround Scaffolding system-components
Three basic elements: standard, ledger, diagonal brace, in practical dimensions and functional components form
the Allround System. All elements are made of steel and are hot-dip galvanized. They all come from our own production,
in accordance with the approvals of the respective authorities. Certified quality due to strict control
of incoming raw materials in each production phase.
8
U-aluminium access deck, Lattice beam
0.61 m wide,
with integrated ladder
Lengths 2.57 m, 3.07 m
O-lattice beam
U-steel access deck, Lengths 5.14 m, 6.14 m, 7.71 m
0.64 m wide
Lengths 2.07 m, 2.57 m
U-lattice beam
Access ladder Lengths 2.07 m, 2.57 m, 3.07 m,
for access decks 4.14 m, 5.14 m, 6.14 m
Length 2.15 m
Spigot
for U-lattice girder, incl. 2 bolts
Steel plank, 0.19 m
Lengths 1.00 m, 1.50 m, Spigot
2.00 m, 2.50 m, 45 mm high with half-coupler for O-ledger,
WS 19 or 22
Steel plank, 0.30 m
Lengths 1.00 m, 1.50 m, Stair / ladder access
2.00 m, 2.50 m, 45 mm high
U-platform stairs,
Version with Locking pins on 2.0 m high, aluminium
one or both sides. Lengths for 2.57 m bay
for 3.07 m bay
Brackets Rosette
10
Scaffold decking Three-part lateral protection
The Layher system allows you to choose between decking
elements made of hot-dip galvanized steel, aluminium, solid wood 11 a (11 a) Mount one ledger at 0.5 m
or an aluminium frame with plywood deck, depending on above deck level as an interme-
application, load class and your operational requirements. diate hand rail and at 1.0 m as the
An inherent characteristic of all Layher decking elements is their main guard rail. Attach toe
reinforcing effect within the scaffolding. Longitudinal ledgers are boards to the scaffolding bays
not necessary; see also item (9). and to the ends.
9 Standard decking
↓
↓
(12) Place longitudinal and end
12 toe boards behind the wedges.
12
11
Formation of corners Further configurations
Example
12
Allround bridgings
Bridging of up to 4.14 m can be made by means of suitable steel
Bridging arrangement B
for load class 3: 2 kN/m2;
or aluminium decks and by using the corresponding guard rails width: 0.73 m, height: 24 m
and toe boards.
A
Bridging of gateways, projecting parts of buildings, balconies or
openings by using Allround lattice beams (see bridging arrange- Section A—A
ment B) or Allround diagonal braces (see bridging arrangement A).
B B
# 24 m
Connect top chord and bottom
chord to rosette using wedge
head. For bridging jobs in
accordance with bridging 1 1 1 1
arrangement B.
A <
<
# 2 x 3.07 = 6.14 m 0.73
Section B–B
For higher loads: (horizontal bracing)
Bridging arrangement A
for load class 4: 3 kN/m2;
width: 1.09 m, height: 24 m,
with K 2000+ diagonal braces
Bridging arrangement A A
A
≤ 24 m
1 1
Section A–A
1 1
R R
≤ 24 m
1 1
<
<
A
# 2 x 2.57 = 5.14 m 1.09
1 1
13
Ultimate capacities
Stress capacity values* of the Allround ledger and the diagonal brace.
Vz Vz
MT
Normal force
NV
Compression Tension
Horizontal force Bay length all bay
0.73 1.09 1.40 1.57 2.07 2.57 3.07 4.14
[m] lengths
VY VY N V.R.d
-16.6 -16.8 -15.5 -14.7 -12.4 -10.2 -8.4 -5.3 +17.9
[kN]
The K 2000+ connector can be combined
with the connector of Variant II.
Higher stress capacities as per approval.
14
Z-8.22-64: Variant II (previous standards, ledgers and braces)
Connection moment Vertical force
Vz Vz
My
NV
NV
Horizontal force
VY VY
15
Approved load bearing capacities
Z-8.22-64: K 2000+, steel, values are permissible loads.
Bay length [m] 0.73 1.09 1.40 1.57 2.07 2.57 3.07 Tab. 2 Load bearing capacity of diagonal braces, K 2000+
Evenly distributed Bay width
0.73 1.09 1.40 1.57 2.07 2.57 3.07
Load capacity
load (q) [kN/m] 22.07 10.44 6.54 5.26 3.12 2.06 1.46 [m]
max. D [kN]
Point load (P) in the Diagonal +11.93 +11.93 +11.93 +11.93 +11.93 +11.93 +11.93
middle of the bay [kN] 7.43 5.21 4.17 3.77 2.96 2.42 2.06 brace - 11.1 - 11.2 - 10.33 - 9.8 - 8.3 - 6.8 - 5.6
V a r i a n t II, s t e e l
Bay length [m] 0.73 1.09 1.40 1.57 2.07 2.57 3.07 Tab. 4 Load bearing capacity of diagonal braces
Evenly distributed Bay width
0.73 1.09 1.40 1.57 2.07 2.57 3.07
Load capacity
load (q) [kN/m] 22.07 8.81 4.63 3.48 1.79 1.07 0.70 [m]
Point load (P) in the Diagonal max. D [kN]
± 5.6 ± 5.6 ± 5.6 ± 5.6 ± 5.6 ± 5.6 ± 5.6
middle of the bay [kN] 7.43 5.21 4.13 3.51 2.40 1.80 1.40 brace
K 2 0 0 0 + , a l s o V a r i a n t II
1)
Single point load exactly in the middle of the beam (= between the
two middle posts)
2)
Single point load above one of the middle posts
16
Load bearing capacity of Allround standards
P e r m i s s i b l e l o a d s f o r K 2 0 0 0+ a n d V a r i a n t II .
V V V V V V V V V V V V
↓ ↓ ↓ ↓ ↓ ↓ ↓ ↓ ↓ ↓ ↓ ↓
Front view
A A A A A A A A A A A A
Top view A = exterior standard
I I I I I I I I I = middle standard
A A
17
Load bearing capacities
Z - 8 . 2 2 - 6 4 . 1 , A l u m i n i u m .
Vy Vy
NV
Front view
A: 1 diagonal brace per 2 bays B: 1 diagonal brace per 3 bays
A A A A A A A A A A A A
A = exterior
Tab. 15 Exterior standard 2 m lift height* I I I I I I I I standard
A A I = middle
Bay width [m] 0.73 1.09 1.57 2.07 2.57 3.07 standard
Positioning of diagonal braces A B B B B B B
max. vertical loadVA [kN] 13.5 11.5 12.5 12.5 12.1 11.9 11.7
Top view
Tab. 18 L oad bearing capacity of U-bridging Tab. 19 Load bearing capacity of Alu U-lattice beam*
ledgers – horizontal ledgers*
Bay width [m] 2.57 3.07 4.14 5.14
Bay width [m] 1.57 2.07
Evenly distributed load (q) [kN/m] 7.73 5.95 4.10 3.18
Evenly distributed load (q) [kN/m] 6.88 3.72
Point load (P) in the middle of the bay [kN]** 6.68 11.37 8.93 7.98
Point load (P) in the middle of the bay [kN]** 6.15 2.28
* The specified loads are working loads.
18
** Completely covered with scaffolding decking
Platforms
Information on load-bearing capacity Tab. 22 Admissible load of spindles (threaded base jacks)
Select the Layher scaffolding decks on the basis of the
Type of spindle Standard type Heavy duty Threaded swivel
required load class and scaffolding width from Table 20 spindle 60 type spindle 80 base plate 60
(standard decks); for wooden planks see table 23. Ref. No. 4001.060 4002.080 4003.000
If scaffold boards are used in service scaffolds suitable for Min. height [cm] 4 4 12
cushioning the impact of a falling person the information Spindle extensions h [cm] 20 30 40 20 30 40 25 30 40
in table 2 shall apply, DIN 4420, pt. 1. Permissible max. load* [kN] 39 32 26 46 37 30 43 37 27
Tab. 23 Permissible span in m for scaffolding decks made * Higher working loads are possible depending on the applications, but
of wooden planks or boards (as per Tab. 2, DIN 4420, pt. 3) must however be verified.
Load class Board or plank Board or plank thickness in cm The specified loads were ascertained on the assumption
EN 12811-1 width (cm) 3.0 3.5 4.0 4.5 5.0 of 5 % horizontal load components.
20 1.25 1.50 1.75 2.25 2.50 Spindle adjustment h:
1, 2, 3
24 and 28 1.25 1.75 2.25 2.50 2.75 Adjustable base plate 60 and adjustable base plate 80; see page 17
20 1.25 1.50 1.75 2.25 2.50
4 Dimensions between surface of base plate and top edge of wing nut
24 and 28 1.25 1.75 2.00 2.25 2.50
5 20, 24, 28 1.25 1.25 1.50 1.75 2.00 Same for threaded swivel base plate 60:
6 20, 24, 28 1.00 1.25 1.25 1.50 1.75 h = dimension between surface of base plate and top edge of wing nut
20
Use as stair tower
Stairway towers are available, optionally and
depending on the stipulations regarding their 1.4
Height of Tower
Erection with stair guardrails
running the same direction.
1.4
2.18
Erection with stair guardrails
2.57 / 3.07
running the opposite direction.
4.75
Material specified according
to erection see table 24. a) 4 -standard tower; 2,0 kN/m2 b) Allround Site Stair Tower with Allround
Stair Unit; 2,0 kN/m2 , material see Tab. 25
Tab. 24 Material specification for stair tower with a plan size of 2.57 x 1.40 m (standard version with 4 standards)
Interior guardrail
U-transom 1.4 m
Standard 2.0 m
Standard 3.0 m
Standard 4.0 m
Height of tower
Standard 1.0 m
Ref.: 2602.000
Ref.: 2603.100
Ref.: 2603.200
Ref.: 2603.300
Ref.: 2603.400
Ref.: 2607.140
Ref.: 2607.250
Ref.: 2613.140
Ref.: 4706.019
Ref.: 3835.257
Ref.: 1752.000
Ref.: 2607.207
Ref.: 3835.257
Ledger 2.57 m
Ledger 1.4 m
Base collar
in metres
2 4 4 2 – 4 – 7 4 3 3 2 2 1 1 2 2 1 1 2 1
4 4 4 2 4 4 – 11 6 5 5 4 4 2 2 2 2 2 2 2 1
6 4 4 2 – 4 4 15 8 7 7 6 6 3 3 2 2 3 3 2 1
8 4 4 2 4 4 4 19 10 9 9 8 8 4 4 2 2 4 4 2 1
10 4 4 2 – 4 8 23 12 11 11 10 10 5 5 2 2 5 5 2 1
12 4 4 2 4 4 8 27 14 13 13 12 12 6 6 2 2 6 6 2 1
14 4 4 2 – 4 12 31 16 15 15 14 14 7 7 2 2 7 7 2 1
16 4 4 2 4 4 12 35 18 17 17 16 16 8 8 2 2 8 8 2 1
18 4 4 2 – 4 16 39 20 19 19 18 18 9 9 2 2 9 9 2 1
20 4 4 2 4 4 16 43 22 21 21 20 20 10 10 2 2 10 10 2 1
For the stair tower with 4 standards with a plan size of 3.07 x 1.4 m all parts with a length of 2.57 m are to be replaced by parts with a length. n Erection only with stairs running the same direction.
of 3.07 m. Free standing stair towers, distance to wall > 0.3 m, require 2 additional guardrail ledgers 2.57 m per floor as inner side protection. n Erection only with stairs running the opposite direction.
Tab. 25 Material specification for Allround Site Stair Tower with a plan size of 2.18 x 4.75 m
Lock against lift-off
without half coupler
Standard 3.00 m
Standard 4.00 m
U-transom 1.09 m
Standard 1.50 m
1.09 m x 0.32 m
Height of tower
Diagonal brace
Diagonal brace
Ref.: 2613.109
Ledger 2.57 m
Ref.: 2602.000
Ref.: 2603.200
Ref.: 2603.300
Ref.: 2603.400
Ref.: 2604.150
Ref.: 2607.109
Ref.: 2607.257
Ref.: 2620.109
Ref.: 2620.257
Ref.: 2634.109
Ref.: 2638.010
Ref.: 3802.109
Ref.: 4001.060
Ledger 1.09 m
base plate 60
Base collar
1.09 m bay
2.57 m bay
Adjustable
Steel deck
reinforced
in metres
10 steps
1.09 m
2m 4 – 4 – 2 11 – 2 3 4 2 2 13 6
4m 10 4 10 – 1 33 1 6 10 8 6 4 29 11
6m 12 6 12 4 – 51 2 12 15 12 12 6 48 12
8m 12 6 12 10 – 69 3 16 22 16 16 8 64 12
10 m 12 6 12 16 – 87 4 20 29 20 20 10 80 12
12 m 12 6 12 22 – 105 5 24 36 24 24 12 96 12
14 m 12 6 12 28 – 123 6 28 43 28 28 14 112 12
16 m 12 6 12 34 – 141 7 32 50 32 32 16 128 12
18 m 12 6 12 40 – 159 8 36 57 36 36 18 144 12
20 m 12 6 12 46 – 177 9 40 64 40 40 20 160 12
22 m 12 6 12 52 – 195 10 44 71 44 44 22 176 12
24 m 12 6 12 58 – 213 11 48 78 48 48 24 192 12
Allround Site Stair Tower, with separate stringers, with 12 standards, admissible load 2.0 kN/m2 with a width of 1.09 m.
21
Use as tower scaffold
Tab. 26 Use as tower scaffold
Admissible load class of the deck, Length l [m]
System ledger Length of 3.07
1.57 2.07 2.57
ledger b [m]
K 2000 Var. II K 2000 Var. II K 2000 Var. II K 2000 Var. II
0.73 6 6 6 6 5 5 4 4
1.09 6 6 6 5 5 5 5 5
1.57 5 3 4 3 4 2 3 2
Ledger
2.07 4 2 3 1 3 1 3 –
2.57 3 1 2 – 1 – 1 –
3.07 1 – 1 – – – – –
U-transom 0.73 6 6 6 6 5 5 4 4
b l
U-transom 1.09 6 6 6 6 5 5 4 4
reinforced 1.40 6 6 6 6 5 5 4 4
Additional measures for the stability Ledger, 1.09 6 6 6 6 5 5 4 4
like anchorage, ballast or guying reinforced 1.28 6 6 6 6 5 5 4 4
could be necessary. 1.57 6 6 6 6 5 5 4 4
U-bridging 2.07 6 6 5 5 5 5 4 4
It depends on the dimensions and ledger 2.57 5 5 4 4 3 3 3 3
the use of the tower scaffold. 3.07 4 4 3 3 3 3 3 3
22
Use as birdcage scaffold
Cross section A-A Cross section B-B
B A
A
A A A
B A
Diagonal braces according to static calculations. Erection arrangement A: Erection arrangement B:
Decking elements Decking elements in alternating
in the same direction direction (= checkered arrangement)
6 6.0 2.07 x 2.07 U-bridging ledger 2.07 m U-bridging ledger 2.07 m Steel decks B
Hinged pin Ø 12 mm
or
Special bolt M12 with nut
23
Allround Scaffolding in allround application
Universal scaffolding for any loading capacity required.
24
Allround Scaffolding – bird cage scaffolds
R e n o v a t i o n W o r k s .
25
Structural scaffold – church towers
S c a f f o l d f o r d i f f i c u l t s t r u c t u r e s .
26
Scaffold for industry
F o r s a f e w o r k i n g a n d m a i n t e n a n c e .
27
As a basic system for versatile use
S t a i r w a y t o w e r s – r o l l i n g t o w e r s –
p r o t e c t i v e c l a d d i n g .
28
Shipyards and offshore
S h o r t e r e c t i o n t i m e s – t h u s s h o r t r e p a i r t i m e .
29
Airplanes are easy to scaffold
S a f e t y . R e l i a b i l i t y . E c o n o m y .
Safety and service are written large when it Dependability and safety thanks to
comes to aircraft. That goes not only for the A bolt-free connection technology
flight itself, but also for maintenance work, A rapid assembly and dismantling,
and hence for the maintenance scaffolding. ensuring shorter aircraft idle times
Whether it’s rolling maintenance units and A non-slip decking, convenient stairways,
special structures, Layher Allround Scaffold- strong castors, and other components
ing is the right choice for any scaffolding besides from a well thought out and
where dependable and safe working at pre- sophisticated system.
cisely the right height is crucial.
It’s clear to see that Layher Allround
Flexibility thanks to Scaffolding is outstandingly suitable for
A variable working heights aircraft repair and maintenance.
A selectable bay lengths and widths
A outstanding adaptation to the aircraft
fuselage
30
Spectator stands, stages –
inside and outside
F o r a l l e v e n t s .
Event stages
Event stand
31
We’re there for you. Wherever and whenever you need us.
Layher in Germany
Branches and delivery warehouses nationwide.
Layher International
Subsidiaries: Representatives:
Argentina, Australia, Austria, Belgium, Brazil, Bulgaria, Chile, Croatia, Czech Republic, Denmark, Estonia, Finland, Hong
Colombia, France, Greece, Hungary, India, Italy, Kazakhstan, Kong, Japan, Jordan, Kuwait, Latvija, Lebanon, Libya, Oman,
Lithuania, Morocco, Netherlands, New Zealand, Norway, Philippines, Romania, Saudi-Arabia, Slovakia, Slovenia,
Peru, Poland, Russia, Serbia, Singapore, South Africa, Spain, United Arab Emirates
Sweden, Switzerland, Turkey, United Kingdom, USA. and many other countries.
Protective
Systems
Event Systems
SpeedyScaf
Ref. No. 8116.207
Allround Scaffolding