Professional Documents
Culture Documents
Parts Manual
powersolutions.danfoss.com
Parts Manual Variable Displacement Motors, Series 51, 80 cc
Contents
Threshold/range Threshold/range.................................................................................................................................................................24-27
Contents
Orifice Orifice.....................................................................................................................................................................................74-91
General information
Service parts Use this information and procedure to identify the module group, item number, manufacture date,
indentification part number, and part name of the parts included in the Series 51: 80cc variable displacement motor.
Use the parts listed when performing minor repairs, major repairs, or conversions on Series 51: 80 cc
motors. Refer to BLN-10043 Service Manual when doing this.
Model Code
The Danfoss model code defines the specific
unit. Use it when ordering parts to service this
Model Code Typ
product.
51V080-R-C7-N-F1-A1-
Model Number A-N-E2-NNN-035-AA-
The manufacturing factory uses Danfoss’ model
number. On repeat orders, order a complete unit
10-03-11
by the model number. Model No. Ident-Nr
501277
Serial Number N - 99 - 12 - 12345
The Danfoss serial number identifies the Serial No. Fabr-Nr
MADE IN U.S.A.
manufacture date and unit sequence in the
build. The serial number also identifies the unit’s
warranty time period.
General information The date code is the year and week of manufacture. The same item number may list more than one
part number. This indicates that there is more than one configuration for that item number. You will
Date code see that there are different date codes for different part numbers. Find the date code of your unit on
the nameplate to determine the service part number you need to order.
All units using this order code with a date code of 92-33, up to and including 00-24, must use part
number 743831.
All units with a date code of 00-25, and newer, must use part number 515752.
Service bulletins A Service Bulletin Number (SB-_ _ _ _ - _ _ _) may follow the part name of the part you desire. Read
that Service Bulletin before ordering that part. The information contained in these Service Bulletins,
as of the print date, are at the end of this manual. Service Bulletins contain more detailed information
such as interchangeability, what additional parts are involved, and so forth. We suggest that you add
additional Service Bulletins to this manual as you recieve them.
General information
A part number that has another number following in parentheses makes this a world-wide manual.
The first number is sold in Germany. The number in parentheses is sold in the United States. (Example:
001289 (9004800-3708); customers order 9004800-3708 if ordering the part in the United States.)
1. Referring to the shaft module in the Order Code (see page 7), the shaft option for this motor is
identified by the code C7 (51V080 R C7 N F1 A1 A N E2 NNN 035 AA 10 03 11).
3. Find the order code that relates to this unit, which is C7.
Order code
G L F M N J S T W Y P K V Z
5 1 V 0 8 0 R C 7 N F 1 A 1 A N E 2 NNN 0 3 5 AA 1 0 0 3 1 1
Product
Flange
Frame size
End cap
Shaft
Maximum displacement
Control
Threshold/range
Control ramp
Orifice
Special hardware
Minimum displacement
Loop flushing
Charge relief
Threshold setting
PCOR setting
P100 536E
Cartridge flange
Prior to
N-94-42
L35
N-94-42
thru
L85 N-98-32
L90 L80
L95
L40
L50
L80
B80
L35
L95 L750
L81
L82 L70
L35
N-98-33
and beyond
L95
L81
W30
L90
W30 B70A
B71
B71A
C40
B05 Q020
C05
E100 246E
C10
Enlarged bold type item
numbers are recommended
part to stock for servicing.
Special hardware
ABA W30 92-33 515965 (9005110-5600) Plug 1
W30A 92-33 085043 (9004201-3700) O-ring 1
DIN flange
L70
W30A L35
W30
W30A
W30 L40
L50
W30A
B70
B71A
B50
B50 B10
B71A
B71
C40
Q020
C05
C10
B05
E100 660E
Special hardware
AAA B10 92-01 503134 Housing 1
B70 92-01 664524 (9005110-9000) Plug 1
B70A 92-01 001156 (9004201-7500) O-ring 1
SAE flange
Q010
B80
L35 L70
W30
W30A
W30
L40
W30A L50
W30
W30A
B70
B70A B70 B70A
B50
B50 B10
B71 B71A
C40
Q020
C05
C10
E100 247E
Special hardware
AAA B10 93-35 504584 Housing with speed sensor port 1
B70 95-51 664524 (9005110-9000) Plug 1
“ 93-35 95-50 774885 Adapter plug 1
L35 93-35 754895 Bearing housing 1
W30 93-35 512659 (KPPG12508) Speed sensor 1
W30A 93-35 085043 (9004201-3700) O-ring 1
SAE flange
Q010
B80
L35 L70
W30
W30A
W30
L40
W30A L50
W30
W30A
B70
L35
B70A B70 B70A
B50
B50 B10
B71 B71A
C40
Q020
C05
C10
E100 248E
B05
Enlarged bold type item
numbers are recommended
part to stock for servicing.
Special hardware
AAA W30 93-35 512659 (KPPG12508) Speed sensor 1
W30A 93-35 085043 (9004201-3700) O-ring 1
Maximum displacement
G24
G110
G110A G260
E100 272E
Maximum displacement
A F10A 92-10 393694 Screw, M10 x 25 mm 1
F20A 92-10 653980 Spacer, 4.0 mm 1
End cap
G36
F10
F11
F12
G50
G34
G12
G32
G30
G12A
G12
G12
G80A
G80
G12A
G30
G18A
G18 G12
G30A
E100 250E
End cap
G36
F10
F11
F12
F24 F120
G60
F26
F28
G10
G34
G32
G12A
G12
G80A
G80
G12A
G36
G12
G36
F10
F11
F12
F24 F120 G60
G50
G34
G32
G30
G12A
G12
G80A
G80
E100 251E
G12 G12A G12A
G30
G18A Enlarged bold type item
G18 G12 numbers are recommended
G30A part to stock for servicing.
End cap
G36
F10
F11
F12
F24 F120 G60
G50
G34
G32
G30
G12A
G12
G80A
G80
G13A G12A
G13 G30
G18A
G18 G12
G30A
E100 253E
Threshold/Range
J50
J100
J30
J10
J20
E100 299E
Threshold/Range Threshold/range
Order Item Date Date Part Part Name Qty. per
Code Begin End Number Model/Kit
A J10 91-26 507638 Spring 1
2-5 bar J20 93-34 501347 Spring seat 1
“ 91-26 93-33 722231 Spring seat - OBSOLETE 1
J30 96-07 507670 Spring seat (SB-1995-013) 1
J50 91-26 732479 (9004105-0100) O-ring 1
J100 91-26 507692 Threshold adjustment kit (SB-1995-013) 1
Threshold/Range
J50
J100
J30
J10
J20
E100 299E
Threshold/Range Threshold/range
Order Item Date Date Part Part Name Qty. per
Code Begin End Number Model/Kit
K J10 91-26 722207 Spring 1
50-85 mA J20 93-34 501347 Spring seat 1
“ 91-26 93-33 722231 Spring seat - OBSOLETE 1
J30 96-07 507670 Spring seat (SB-1995-013) 1
J50 91-26 732479 (9004105-0100) O-ring 1
J100 91-26 507692 Threshold adjustment kit (SB-1995-013) 1
N No parts
Charge relief
K50
K000
K95A
K50
E100 300E
K95A
K50 K10 K
G20 K50
K18
K14
G20
L1
L1
Q030
Q030
E100 256E
Loop flushing
AA G20 91-26 518016 Plug assembly 2
G20A 91-26 085043 (9004201-3700) O-ring 2
K14 91-26 513596 Spring guide assembly (SB-2000-044) 2
K18 91-26 367789 Shuttle spool 1
NN No parts
Shaft
C7 L1 91-12 722017 Shaft, 23 tooth spline without speed ring 1
Control
G36 F32
G42 G38
F324
G38 G42
G420
Refer to SB-2002-001
M1Q1 M24
T4
Note: N32, T4, T6 and Z* M24
are not included in M1Q1
M23 T6
M23A
M22A
M22 N32
M21
M24A
M20
M24 M18
D7 and D8 M1
M24
M15
Z*
M16
M14
M151
M150
E100 655E
Control
F32
F324
M16
M22A
M20
M1Q1
M22
M1
M14
M19
M19A
M2
E100 257E
Control
F32
F324
M28
M24
M30
M38
M36
M32
M1Q1
M32 M32A
M44A
M44
M42A
M42
M26
M1 M16
M12
M14
M18
Control
F32
F324
M1Q1
M16
M22A
M20
M22
M1
M14
M19
M19A
G36
F324 F1 and F2
F32
M1
G42 G38
G38 G42
M1Q1
G20 M15
G20A M15A
K14
K18
K14
G20
M14A
M14 G20A
E100 302E
M151
Enlarged bold type item
numbers are recommended
M150
part to stock for servicing.
G1 and G2
Control
F32
F324
M16
M22A
M20
M1Q1
M22
M1
M14
M19
M19A
F32
M18
M14
M18A M22
E100 260 E
Hydraulic proportional
HA & HE F32 94-12 727115 4-way valve assembly 1
F324 94-12 730036 O-ring 2
G36 94-12 03-07 364968 O-ring (SB-2002-001) not included in 1
M1Q1
G38 94-12 03-07 792739 O-ring (SB-2002-001) not included in 3
M1Q1
G42 94-12 03-07 754580 O-ring (SB-2002-001) not included in 3
M1Q1
G420 03-08 511810 Gasket/O-ring seal (SB-2002-001) not 1
included in M1Q1)
M1Q1 94-12 507504 Control kit 1
M18 94-12 504519 Plug 4
M18A 94-12 039297 (9004201-1200) O-ring 4
M22 94-12 732982 (9007314-1009) Screw 4
Control
F32
F324
G36
G420 G42 G38
G38 G42
M24 J10
M10 (not included
M22 in control kit)
M20
M14
M12
M28 M18
M16
E100 303E
Control
F32
F324
M1Q1
M12
M17 M30
M28 M18
M17A M26
M10 M14
M32
M30 M24
HS
M16
M12
M10
M36
F32 M1Q1
F324
HP
G36
G42 G38
M18
M18
M18 M10
M16
M18A M12
M16A E100 304E
Control
F32
F324
N34
N11 U6
G36 N13 U7
G42 G38
Refer to SB-2002-001
N84
M24 M24
T4
M1Q1 N33
T6
M23
M23A
M22A M24
M20
M22
M22A M21 N32
N34
M24
M22 M18
M1 Z*
M1 M15 M16
M151
M15 M14
M150
E100 305E
Control
F32
F324
M16
M1Q1 M22A
M20
M22
M1
M14
M19
F32 M19A
M1Q1 F324
G36
U7
G42 G38 K1 and K2
G38 G42 G420
Refer to SB-2002-001
M84A
M24 M84
M24
T4
T6
M23
M23A
M24
M20
M24
M21 M32
M24
Note: T4, T6 and Z* are M18
not included in M1Q1 Z*
M151
M16
M14
M150 E100 306E
Control
F32
M1Q1
F324
G36
G42 G38
Refer to SB-2002-001
M18 M18A
M18
M10
M12
M16A
M16
M1
M22
E100 307E
Solenoid proportional
L1 M1 95-35 11026442 Solenoid, 12 volt, DIN connector 1
M1Q1 95-35 509827 Control kit, 12 volt, DIN connector 1
Control
M98
M96
M18
M16
M400
M12
G36
G42 G38
G420
M1Q1 G38 G42
Refer to SB-2002-001
M14
F32
F324 N2
G36
G42 G38
M26 G420
G38 G42
M26A
M30
M27 M27 Refer to SB-2002-001
M36 M27
M27A M36
M27 M26 M24
M27 M82 Z*
M1U7
M1U6
M18
M27 M20 M14
M16
PC
M58 M27 M29
N87
Pressure conpensator
PC F32 91-26 510416 4-way valve assembly 1
F324 91-26 730036 O-ring 2
G36 91-26 03-07 364968 O-ring (SB-2002-001) 1
G38 91-26 03-07 792739 O-ring (SB-2002-001) 3
G42 91-26 03-07 754580 O-ring (SB-2002-001) 3
G420 03-08 511810 Gasket/O-ring seal (SB-2002-001) 1
M14 91-26 342709 (9003575-0101) Nut 1
M16 91-26 001149 (9004201-6200) O-ring 1
M18 91-26 509152 Spring 1
M20 91-26 746016 Relief valve 1
M23 91-26 315325 (9005110-8700) Plug 1
M23A 91-26 001149 (9004201-6200) O-ring 1
M24 91-26 732479 (9004105-0100) O-ring 4
M26 91-26 515965 (9005110-5600) Plug 2
M26A 91-26 085043 (9004201-3700) O-ring 2
M27 91-26 504519 Plug 16
M27A 91-26 039297 (9004201-1200) O-ring 16
M29 91-26 713719 (9007314-0610) Screw 4
M30 91-26 718833 Shuttle valve assembly 1
M36 91-26 092114 (9007712-0604) Set screw 4
M58 91-26 732982 (9007314-1009) Screw 4
M82 91-26 732479 (9004105-0100) O-ring 1
M96 91-26 084673 Sealing ring 1
M98 91-26 745331 Plug 1
N87 91-26 503887 PCOR housing assembly 1
Z* 91-26 745661 Adjuster, 100-260 bar 1
“ 91-26 745649 Adjuster, 270-370 bar 1
Control
M1Q1 M18
M18A N20
N20A
M12
NT40
(L5, R5) M1
(C2)
NT40A N14
(C0)
M16A
NT42 M16
NT40
M22
F32
F324
G38 G420
G42
G36
Refer to SB-2002-001
E100 333E
T1 and T2 control kits used with various servo pressure supply options
T1/C0 M1Q1 96-31 508326 Control kit, T1/C0, 12 volt, 1
DIN connector
N14 96-31 503503 Pin 1
N20 96-31 515965 (9005110-5600) Plug 1
N20A 96-31 085043 (9004201-3700) O-ring 1
NT42 96-31 508175 Spool 1
Control
M18
M18A N20
N20A
M1Q1 (TA) N26
NT40
M12
(TH) M1
NT40A M16A
NT42 M16
(C2 & C7)
NT40
M22
F32
F324
G38 G420
G42
G36
Refer to SB-2002-001
E100 334E
TA and TH control kits used with various servo pressure supply options
TA/C2 M1Q1 97-02 506884 Control kit, TA/C2 1
TH/C2 M1Q1 97-02 503801 Control kit, TH/C2 1
N20 97-02 515965 (9005110-5600) Plug 1
N20A 97-02 085043 (9004201-3700) O-ring 1
NT40 97-02 515965 (9005110-5600) Plug 2
NT40A 97-02 085043 (9004201-3700) O-ring 2
NT42 97-02 508156 Spool 1
Control
M18
M18A
M12
M1
M16A
M16
M22
F32
F324
G38 G420
G42
G36
M15
M23A M1 Refer to SB-2002-001
M23 M23A
M23 M1Q1
M22
M22A M23A
M23
M23 M40
M50 M22A
M22
M23 M22
M50
M22A
M22 E100 271E
M151
M150 E100 664 Enlarged bold type item
numbers are recommended
part to stock for servicing.
Electric-hydraulic proportional
Y7 F32 01-01 727115 4-way valve assembly 1
F324 01-01 730036 O-ring 2
G36 01-01 03-07 364968 O-ring (SB-2002-001) 1
G38 01-01 03-07 792739 O-ring (SB-2002-001) 3
G42 01-01 03-07 754580 O-ring (SB-2002-001) 3
G420 03-08 511810 Gasket/O-ring seal (SB-2002-001) 1
M1 01-01 518080 Solenoid valve, 12 volt, Jet connector 1
M1Q1 01-01 519577 Control kit 1
M15 01-01 067694 Screw 2
M22 01-01 515965 (9005110-5600) Plug 4
M22A 01-01 085043 (9004201-3700) O-ring 4
M23 01-01 504519 Plug 10
M23A 01-01 039297 (9004201-1200) O-ring 10
M40 01-01 718833 Spool 1
M50 0101 578542 Orifce, 0.8, M6 x 8 2
M150 01-01 672295 Screw 2
M151 01-01 502580 Screw 2
G36
G42 G38
G420
N26 N32 G38 G42
N26A N27
N87
Q3
N23 N27
E100 309E
A1 and A3 servo pressure supply kits used with various control options
E1 Q2 91-26 503594 Multi-function block kit 1
E2 Q2 91-26 503594 Multi-function block kit 1
E5 Q2 91-26 503594 Multi-function block kit 1
EP Q2 91-26 506924 Multi-function block kit 1
EQ Q2 91-26 506924 Multi-function block kit 1
ER Q2 91-26 503594 Multi-function block kit 1
F1 Q2 91-26 503594 Multi-function block kit 1
F2 Q2 91-26 503594 Multi-function block kit 1
H1 Q2 91-26 506924 Multi-function block kit 1
H2 Q2 91-26 506924 Multi-function block kit 1
HP Q2 91-26 503570 Multi-function block kit 1
HS Q2 91-26 503570 Multi-function block kit 1
K1 Q2 91-26 506924 Multi-function block kit 1
K2 Q2 91-26 506924 Multi-function block kit 1
G36
G42 G38
G420
N26 G38 G42
N26A N27
N30
N27
Refer to SB-2002-001
N36
N27A N27
N36
N27 N24
N26
N27 N82
N18
N27 M20 N14
N16
N58 N27
Q2 N29
N87
Q3
N23 N27
E100 310E
A2 and A4 servo pressure supply kits used with various control options
E1 Q2 91-26 503577 Multi-function block kit 1
E2 Q2 91-26 503577 Multi-function block kit 1
E5 Q2 91-26 503577 Multi-function block kit 1
EP Q2 91-26 506921 Multi-function block kit 1
EQ Q2 91-26 506921 Multi-function block kit 1
ER Q2 91-26 503577 Multi-function block kit 1
F1 Q2 91-26 503577 Multi-function block kit 1
F2 Q2 91-26 503577 Multi-function block kit 1
H1 Q2 91-26 506921 Multi-function block kit 1
H2 Q2 91-26 506921 Multi-function block kit 1
HP Q2 91-26 503568 Multi-function block kit 1
HS Q2 91-26 503568 Multi-function block kit 1
K1 Q2 91-26 506921 Multi-function block kit 1
K2 Q2 91-26 506921 Multi-function block kit 1
G36
G42 G38
G420
N26 G38 G42
N26A N27
N36
N30
N27
Refer to SB-2002-001
N36
N27A N27
N27 N36
N26
N27
N27
N58
Q2
E100 312E
A5 and A6 servo pressure supply kits used with various control options
E1 Q2 91-26 503590 Multi-function block kit 1
E2 Q2 91-26 503590 Multi-function block kit 1
E5 Q2 91-26 503590 Multi-function block kit 1
EP Q2 91-26 503586 Multi-function block kit 1
EQ Q2 91-26 503586 Multi-function block kit 1
ER Q2 91-26 503590 Multi-function block kit 1
F1 Q2 91-26 503590 Multi-function block kit 1
F2 Q2 91-26 503590 Multi-function block kit 1
H1 Q2 91-26 503586 Multi-function block kit 1
H2 Q2 91-26 503586 Multi-function block kit 1
HP Q2 91-26 503582 Multi-function block kit 1
HS Q2 91-26 503582 Multi-function block kit 1
K1 Q2 91-26 503586 Multi-function block kit 1
K2 Q2 91-26 503586 Multi-function block kit 1
N20
N20A
N26
NT40
E100 656
NT40
NT42
(C0)
N11
N13
N34A N33
N34 N84
N84A
N33
N33A
N32
N34A
N34
E100 277
N84A
N33
N33A
N32
N34A
N34
E100 277
G36
G42 G38
G420
N26 N28A G38 G42
N26A N28 N27
N30
N84
Refer to SB-2002-001
N84
N27
N36 N84A
N27
N27A N28
N36
N27 N24
N26
N27 N82
N18
N27 M20 N14
N16
N58 N27 N29
N87
Q3
N23 N27
E100 313E
N20
N20A
NT40
NT42 N14
L5, and R5
N84
N84A
N32
E100 657
M1
NN No parts
Control ramp
J50
S90
S20
S20
S10* S11T
S10
S10T
S70
E100 314
N No parts
Orifice
T3
T1
U5
T2
T7 T8 T7
E100 315
T4
T5
T6
U7
U6
Orifice Orifice
Order Item Date Date Part Part Name Qty. per
Code Begin End Number Model/Kit
A0 T1 92.38 913897 (9007712-0605) Set screw 1
T2 92.38 913897 (9007712-0605) Set screw 1
T3 92.38 913897 (9007712-0605) Set screw 1
Orifice
T3
T1
U5
T2
T7 T8 T7
E100 315
T4
T5
T6
U7
U6
Orifice Orifice
Order Item Date Date Part Part Name Qty. per
Code Begin End Number Model/Kit
A7 T1 92-33 679316 Orifice. 0.5, M6 x 8 1
T2 92-33 578542 Orifice, 0.8, M6 x 8 1
T3 92-33 578542 Orifice, 0.8, M6 x 8 1
T5 92-33 578542 Orifice, 0.8, M6 x 8 1
T7 92-33 639096 Orifice. 0.6, M5 x 6 1
T8 92-33 639096 Orifice. 0.6, M5 x 6 1
Orifice
T3
T1
U5
T2
T7 T8 T7
E100 315
T4
T5
T6
U7
U6
Orifice Orifice
Order Item Date Date Part Part Name Qty. per
Code Begin End Number Model/Kit
B9 T1 92-33 679316 Orifice. 0.5, M6 x 8 1
T2 92-33 679316 Orifice. 0.5, M6 x 8 1
T3 92-33 679316 Orifice. 0.5, M6 x 8 1
T4 92-33 578542 Orifice, 0.8, M6 x 8 1
T5 92-33 913897 (9007712-0605) Set screw 1
T6 92-33 578542 Orifice, 0.8, M6 x 8 1
T7 92-33 639096 Orifice. 0.6, M5 x 6 1
T8 92-33 639096 Orifice. 0.6, M5 x 6 1
U5 92-33 913897 (9007712-0605) Set screw 1
U6 92-33 511825 Orifice. 0.6, M6 x 8 1
U7 92-33 511825 Orifice. 0.6, M6 x 8 1
C0 No parts
Orifice
T3
T1
U5
T2
T7 T8 T7
E100 315
T4
T5
T6
U7
U6
Orifice Orifice
Order Item Date Date Part Part Name Qty. per
Code Begin End Number Model/Kit
C8 T1 92-33 679316 Orifice. 0.5, M6 x 8 1
T2 92-33 578542 Orifice, 0.8, M6 x 8 1
T3 92-33 578542 Orifice, 0.8, M6 x 8 1
T4 92-33 913897 (9007712-0605) Set screw 1
T5 92-33 913897 (9007712-0605) Set screw 1
T6 92-33 578542 Orifice, 0.8, M6 x 8 1
T7 92-33 639096 Orifice. 0.6, M5 x 6 1
T8 92-33 639096 Orifice. 0.6, M5 x 6 1
U5 92-33 913897 (9007712-0605) Set screw 1
Orifice
T3
T1
U5
T2
T7 T8 T7
E100 315
T4
T5
T6
U7
U6
Orifice Orifice
Order Item Date Date Part Part Name Qty. per
Code Begin End Number Model/Kit
E2 T1 92-33 679316 Orifice. 0.5, M6 x 8 1
T2 92-33 578542 Orifice, 0.8, M6 x 8 1
T3 92-33 578542 Orifice, 0.8, M6 x 8 1
T4 92-33 578542 Orifice, 0.8, M6 x 8 1
T5 92-33 913897 (9007712-0605) Set screw 1
T6 92-33 578542 Orifice, 0.8, M6 x 8 1
T7 92-33 639096 Orifice. 0.6, M5 x 6 1
T8 92-33 639096 Orifice. 0.6, M5 x 6 1
U6 92-33 044081 Orifice. 0.7, M6 x 8 1
U7 92-33 044081 Orifice. 0.7, M6 x 8 1
Orifice
T3
T1
U5
T2
T7 T8 T7
E100 315
T4
T5
T6
U7
U6
Orifice Orifice
Order Item Date Date Part Part Name Qty. per
Code Begin End Number Model/Kit
E6 T1 92-33 679316 Orifice. 0.5, M6 x 8 1
T2 92-33 578542 Orifice, 0.8, M6 x 8 1
T3 92-33 578542 Orifice, 0.8, M6 x 8 1
T7 92-33 639096 Orifice. 0.6, M5 x 6 1
T8 92-33 639096 Orifice. 0.6, M5 x 6 1
U5 92-33 913897 (9007712-0605) Set screw 1
Orifice
T3
T1
U5
T2
T7 T8 T7
E100 315
T4
T5
T6
U7
U6
Orifice Orifice
Order Item Date Date Part Part Name Qty. per
Code Begin End Number Model/Kit
F8 T1 92-33 578542 Orifice, 0.8, M6 x 8 1
T2 92-33 578542 Orifice, 0.8, M6 x 8 1
T3 92-33 578542 Orifice, 0.8, M6 x 8 1
T4 92-33 913897 (9007712-0605) Set screw 1
T5 92-33 578542 Orifice, 0.8, M6 x 8 1
T6 92-33 913897 (9007712-0605) Set screw 1
T7 92-33 639096 Orifice. 0.6, M5 x 6 1
T8 92-33 639096 Orifice. 0.6, M5 x 6 1
Orifice
U6
U7
T4
T6
T3
T1
E100 316E
U5
T2
T7 T8 T7
E100 315
T3
T2
T4
T5
T6
T1
U7 E100 662
U6
Orifice Orifice
Order Item Date Date Part Part Name Qty. per
Code Begin End Number Model/Kit
G8 T1 92-33 679316 Orifice. 0.5, M6 x 8 1
T2 92-33 679316 Orifice. 0.5, M6 x 8 1
T3 92-33 679316 Orifice. 0.5, M6 x 8 1
T5 92-33 913897 (9007712-0605) Set screw 1
T6 92-33 913897 (9007712-0605) Set screw 1
U6 92-33 578542 Orifice, 0.8, M6 x 8 1
U7 92-33 578542 Orifice, 0.8, M6 x 8 1
Orifice
U6
U7
T4
T6
T3
T1
E100 316E
U5
T2
T7 T8 T7
E100 315
U7
T4 T4
T5
T6
T6
U7
E100 661
U6
Orifice Orifice
Order Item Date Date Part Part Name Qty. per
Code Begin End Number Model/Kit
K3 T2 92-33 511825 Orifice. 0.6, M6 x 8 1
T7 92-33 639096 Orifice. 0.6, M5 x 6 1
T8 92-33 639096 Orifice. 0.6, M5 x 6 1
U7 92-33 511825 Orifice. 0.6, M6 x 8 1
Y40
Y41
Y50
Y10
Y20
Q120
E100 317E
PCOR adjuster
00 No parts
A1-C7 No parts
Service Bulletin:
SB-1993-006
Description Effective immediately, a new end cap gasket has been incorporated on all Series 51 motors. It is a
direct replacement for the current gasket. The visible differences between the two gaskets are:
The new gasket is a stand alone gasket which should not be used with any sealing aid. The current
torque values stay the same.
The new gaskets are now available and MUST be used in any repair or conversion.
Part numbers affected Frame size Old part number New part number
60cc 729228 501198
80cc 734368 501199
110cc 734376 501200
160cc 734384 501201
250cc 734392 501202
Service Bulletin:
SB-1995-013
Description To improve the sensitivity of the threshold adjustment on Series 51 motors, the threads on the
adjusting screw are being changed from standard pitch thread to fine pitch thread. The adjusting
screw nut and lock nut will also change. At the same time, the bore diameter in the end of the
adjusting screw and the pin diameter on the end of the spring seat will decrease.
The old style parts will be obsoleted and no longer available as service parts. A service kit containing
the adjusting assembly and the spring seat has been created.
Locknut
Adjusting screw nut
Threshold adjusting
screw
Spring seat
Service Bulletin:
SB-1996-005
Subject Change to balanced areas between end cap and valve segment.
Description As part of the continuing Series 51 product improvement program, the balance lands on the end cap
and valve segment have been changed. The valve segment now defines the balance. The contact
surface of the end cap has been made larger while the contact surface of the valve segment has been
reduced. The change was implemented in three steps:
1. Change the valve segment so it defines the balance between the valve segment and the end cap.
This change was implemented May 1994.
2. Change the end cap to allow a larger contact surface to keep the load arwea constant. This change
was implemented January 1995
3. Change the valve segment to allow a smaller contact surface and reduce the balance. This change
was implemented Februrary 1996.
Do not use a new end cap with an old valve seagment. However a new valve segment will work with
an old end cap. The new valve segment (3rd step) is marked with a drill point on the cylinder block
interface side next to the outer drain hole.
The old end cap and valve segment part numbers are obsolete. They are no longer available as
genuine service parts.
Valve
segment
End cap
Service Bulletin:
SB-1996-005
Part numbers affected End Radial ports Radial ports Axial ports Axial ports
caps w/LF w/o LF w/LF w/o LF
Old New Old New Old New Old New
60cc 729210 504226 779793 504227 - - - -
80cc 731794 504230 731794 504231 739615 504232 739615 504234
110cc 731802 504236 731802 504236 739631 504237 739631 504238
160cc 731810 504239 731810 504240 731828 504242 731828 504243
250cc 731836 504244 783282 504245 731844 504246 731844 504247
Service Bulletin:
SB-1997-009
Description As a product improvement, Danfoss is changing the vender for the servo piston seal ring used in the
Series 51 variable motors. As a result, the old piston seal ring will become obsolete and no longer
available as a service part.
Part numbers affected Frame size Old part number New part number
60cc 504202 508131
80cc 504203 508132
110cc 504204 508133
160cc 504205 508134
250cc 687277 504136
Service Bulletin:
SB-1997-030
Description As part of the continuing Series 51 product improvement, the valve segment spindle design has been
changed. The new design spindle has a step that stops against a recess in the valve segment. The new
stepped spindle valve segment assembly replaces the valve segment assemblies with the straight
spindle and the retained spindle.
The old segment valve assemblies will become obsolete. The stepped spindle valve segment
assembly will be the standard for all models.
step on spindle
press fit
(spindle diameter is
larger than the needle
bearing diameter)
Service Bulletin:
SB-1998-035A
Description In order to incorporate a speed sensor into the Series 51 cartridge motors, some changes have been
made to the main housing and bearing housing. These changes included: adding a boss to the side of
the main housing for the speed sensor, changing from O-ring seals between housings to a gasket
seal, shortening the distance ring to allow clearance for the speed sensor, and adding a retaining ring
to locate the distance ring. These parts are non-interchangeable as both housings have changed. The
old housings and distance ring are obsolete and no longer available as service patrts. Refer to Service
Bulletin SB-1998-021 for housing bolt torque and sequence.
Housing bolt
Bearing housing
Distance ring To
Retaining ring
Speed Gasket
Sensor
Main housing
O-ring
O-ring
Service Bulletin:
SB-1998-086
Description As a joint sealing improvement, Danfoss is changing the type of seal between the housings on Series
51 cartridge type motors in the 80cc frame size. With this change, two O-rings are incorporated into
the design replacing the gasket. This design is similar, but with different size O-rings to the two O-ring
design originally used on the 80cc cartridge motor, prior to the incorporation of the speed sensor
option (see SB-1998-035). Both housings have been changed so they are not individually
interchangeable with the “gasket” design housings. The “gasket” design housings and gasket part
numbers will remain available as service parts.
N98-33
and beyond
Bearing Housing
Prior to
To N94-42
To
Gasket
Main Housing
Part numbers affected Description Before N-94-42 N-94-42 thru N-98-32 N-98-33 & beyond
Main housing 734855 505527 w/o PPU 512676 w/o PPU
501104 w/PPU 512677 w/PPU
Bearing housing 734632 501109 512679
Retaining ring N/A 371625 371625
Gasket N/A 507259 N/A
O-ring 916759 N/A 502205
O-ring 279570 N/A 512678
Distance ring 734913 501117 501117
Service Bulletin:
SB-1999-059
Products affected Series 51: 60cc, 80cc, 110cc, and 160cc motors
Description As a product improvement, Danfoss has changed the threaded hole at the customer end of DIN shaft
assemblies to metric threads. Metric shaft assemblies will now have a metric threaded hole. To aid in
identifying this change, new shaft assembly part numbers have been released. The new shaft
assemblies are interchangeable with the previous shaft assemblies. The previous shaft assembly part
numbers will become obsolete.
DIN configuration
Threaded hole
Cartridge configuration
Models affected All 60, 80, 110, and 160cc motors (Series 51 and 51-1) with DIN shaft assemblies
Part numbers affected Frame Shaft Previous New Bolt size Bolt size Effective after
size code p/n p/n FROM TO serial number
60cc D1 747931 513034 7/16 - 14 M10 x 1.5 N-99-17-xxxxx
60cc D2 787622 513033 7/16 - 14 M10 x 1.5 N-99-52-xxxxx
80cc D2 742213 513037 7/16 - 14 M10 x 1.5 N-99-13-xxxxx
80cc D3 783399 513035 7/16 - 14 M10 x 1.5 N-99-12-xxxxx
110cc D3 787663 513039 5/8 - 11 M12 x 1.75 N-99-16-xxxxx
110cc D4 749192 513038 5/8 - 11 M12 x 1.75 N-99-17-xxxxx
160cc D4 787689 513041 5/8 - 11 M12 x 1.75 N-99-16-xxxxx
160cc D5 749226 513040 5/8 - 11 M12 x 1.75 N-99-39-xxxxx
Service Bulletin:
SB-2000-044
Subject Change to spring and spring seat at ends of loop flushing shuttle spool.
Description As a product improvement, and to ease assembly, the spring and spring seat at the ends of the loop
flushing shuttle spool have been changed. The new spring and spring seat clip together. The old
spring and spring seat are interchangeable with the new spring and spring seat as an assembly only.
The old spring seat will become obsolete and no longer available as a service part. The old spring will
remain available as a service part.
From:
To:
Part numbers affected From: Spring part number 4350286 and spring seat part number 4800353
Service Bulletin:
SB-2001-015
Description As a product improvement and to improve ease of assembly, Danfoss has changed the design of the
rollers used on the synchronizing shaft in Series 51 and 51-1 motors. The new rollers are symmetrical,
in that they can be assembled either direction on the synchronizing shaft. The old rollers were
asymmetrical and had to be assembled only one way. The synchronizing shaft has also been changed
to accept the symmetrical rollers. The legs for the rollers are now longer in length.
A service kit is available to replace the old design synchronizing shaft and rollers, which are obsolete
and no longer available as service parts. The pins at each end of the synchronizing shaft are still the
same parts.
Part numbers affected Frame size Old kit part number New kit part number
60cc 771675 517308
80cc 771121 517309
110cc 773267 516485
160cc 776823 517310
250cc 776831 517311
Service Bulletin:
SB-2002-001
Description The sealing is improved between the end cap and controls or multi-function blocks on all Series 51
and 51-1 motors. This change replaces individual O-rings with a gasket that incorporates imbedded
rubber seal rings.. The O-ring spot faces are removed from the end cap mounting face. There is no
change to controls’ and multi-function blocks’ sealing surface.
New end cap part numbers allow better control of this change. Old end cap part numbers are
obsolete. You cannot use the new gasket with old end caps and you cannot use the O-rings with new
end caps. Control and multi-function block kit now include the O-rings and the new gasket.
O-ring spotface
Mounting Mounting
surface surface
O-rings
(3) 754580 O-rings
(3) 79273 Gasket
O-rings
634968 for 60, 80, and 110
364976 for 160
707737 for 250
364976 for 60-1
507998 for 80-1
506754 for 110-1
Service Bulletin:
SB-2002-001
Part numbers affected End cap Frame Old part New part Manufacture Gasket
code size number number date code part number
R and T 60 504226 516057 N-03-14-xxxxx 511810
A 60 504228 515695 N-03-12-xxxxx 511810
R 60-1 506563 516902 N-03-39-xxxxx 512411
A 60-1 506564 516905 N-03-28-xxxxx 512411
H 60-1 510643 516920 N-03-28-xxxxx 512411
R and T 80 504230 515056 N-03-14-xxxxx 511810
A 80 504232 515696 N-03-27-xxxxx 511810
R 80-1 507976 516903 N-03-39-xxxxx 512411
A 80-1 507977 516907 N-03-39-xxxxx 512411
H 80-1 507978 516921 N-03-39-xxxxx 512411
R and T 110 504235 516058 N-03-14-xxxxx 511810
A 110 504237 513592 N-03-01-xxxxx 511810
R 110-1 506601 516904 N-03-39-xxxxx 512411
A 110-1 506602 515697 N-03-39-xxxxx 512411
H 110-1 510634 516923 N-03-39-xxxxx 512411
R 160 504239 516059 N-03-07-xxxxx 511851
A 160 504242 513543 N-03-01-xxxxx 511851
R 250 504244 516060 N-03-07-xxxxx 511851
A 250 504246 513544 N-03-08-xxxxx 511851
Service Bulletin:
SB-2003-007
Description Danfoss
Serial numbers All 60, 80, 110, and 160cc motors (Series 51 and 51-1) with DIN shaft assemblies
Part numbers affected Frame Shaft Previous New Bolt size Bolt size Effective after
size code p/n p/n FROM TO serial number
60cc D1 747931 513034 7/16 - 14 M10 x 1.5 N-99-17-xxxxx
60cc D2 787622 513033 7/16 - 14 M10 x 1.5 N-99-52-xxxxx
80cc D2 742213 513037 7/16 - 14 M10 x 1.5 N-99-13-xxxxx
80cc D3 783399 513035 7/16 - 14 M10 x 1.5 N-99-12-xxxxx
110cc D3 787663 513039 5/8 - 11 M12 x 1.75 N-99-16-xxxxx
110cc D4 749192 513038 5/8 - 11 M12 x 1.75 N-99-17-xxxxx
160cc D4 787689 513041 5/8 - 11 M12 x 1.75 N-99-16-xxxxx
160cc D5 749226 513040 5/8 - 11 M12 x 1.75 N-99-39-xxxxx
Displays We help OEMs around the world speed up system development, reduce costs and bring vehicles to
Electrohydraulic Power market faster.
Steering Danfoss – Your Strongest Partner in Mobile Hydraulics.
Electrohydraulics Go to www.powersolutions.danfoss.com for further product information.
Hydraulic Power Steering
Wherever off-highway vehicles are at work, so is Danfoss.
Integrated Systems
Joysticks and Control We offer expert worldwide support for our customers, ensuring the best possible solutions for
Handles outstanding performance. And with an extensive network of Global Service Partners, we also provide
Microcontrollers and comprehensive global service for all of our components.
Software
Please contact the Danfoss Power Solution representative nearest you.
Open Circuit Axial Piston
Pumps
Orbital Motors
PLUS+1® GUIDE
Proportional Valves
Sensors
Steering
Transit Mixer Drives
Comatrol
www.comatrol.com
Schwarzmüller-Inverter
www.schwarzmueller- Local address:
inverter.com
Turolla
www.turollaocg.com
Valmova
www.valmova.com
Hydro-Gear
www.hydro-gear.com
Daikin-Sauer-Danfoss
www.daikin-sauer-danfoss.com
Danfoss
Power Solutions Trading
Danfoss Danfoss Danfoss (Shanghai) Co. Ltd.
Power Solutions (US) Company Power Solutions GmbH & Co. OHG Power Solutions ApS Building #22, No. 1000 Jin Hai Rd
2800 East 13th Street Krokamp 35 Nordborgvej 81 Jin Qiao, Pudong New District
Ames, IA 50010, USA D-24539 Neumünster, Germany DK-6430 Nordborg, Denmark Shanghai, China 201206
Phone: +1 515 239 6000 Phone: +49 4321 871 0 Phone: +45 7488 2222 Phone: +86 21 3418 5200
Danfoss can accept no responsibility for possible errors in catalogues, brochures and other printed material. Danfoss reserves the right to alter its products without notice. This also applies to products
already on order provided that such alterations can be made without subsequential changes being necessary in specifications already agreed.
All trademarks in this material are property of the respective companies. Danfoss and the Danfoss logotype are trademarks of Danfoss A/S. All rights reserved.