Professional Documents
Culture Documents
WARNING : If you are using adsense or any pay to click traffic system.Make
sure you turn it off before you use this software. You could get Banned..
Ok Now here we go
After you have installed the sftware and opened it this is what you will see .Follow
the numbers on the image to see what each tab does.
1. The first and main tab. You'll use this one pretty much all the time.
2. 2nd tab, it's point is to add link with more precise control, there you can
specify a daily flow amount, that kind of things. Not really useful.
3. 3rd tab : Involving QQ. If you ever need this, you probably can understand
chinese, and you're not reading this guide.
4. The number of sites you can add. Based on your computer's performance.
Goes between 1 and 6.
5. Thats where you will be able to manage your links. More on that later.
6. That button is used to add a new link into Jingling. The 2nd button next to it is
to add a link with more control over flow. 2nd one is pretty useless for us
aswell.
7. Random informations. Just ignore it!
Page 1|5
JINGLING GUIDE
STEP 2
Page 2|5
JINGLING GUIDE
To access that, click on the button 7 on the main tab and follow the steps below
1. Worldwide traffic.
2. Both of them are Chinese only traffic.
3. American traffic only. This will what you'll use mostly.
4. Custom traffic. Allow you to customize traffic, chinese regions only, not very
usefull .
So, if you wanna set Jingling to American traffic only, you just have to tick box
3, and save. The four buttons are, from left to right : Save, Default, Reset,
Cancel.
Page 3|5
JINGLING GUIDE
Now that the source of your traffic is configured, let's see what we got in advanced
configuration. To access it, press button marked 8 on main tab.
1. IPV ratio : Number of subpages an IP will visit. 1:1 means it will only acces the
link, and exit. 1:2 means it'll go the the link, find a subpage and click on it. 1:3
means it will go on main link, find a subpage, click, find a sub-subpage, and
click.
2. That will configure the behavior of your links : The first box will behave with
the IPV ratio, clicking on random links on the page. The 2nd one will reload
the page only. The 3rd one will access a subpage, then open the original link
again. The 4th will search for a matching subpage : you can enter what you
want in the textbox, the bot will search for it, and access it if it can find it.
3. Enable or disable popup. Enable it if you site has popups in it. If you're not
sure, I'll talk about the Jingling link testing tool later on. If you have popups,
you want to set it a 20%.
4. That's the destination configuration. Used to redirect traffic after a page load.
You can add up to 5 links here, and configure a % for each link.
5. That's the referer. You can change the referer URL here. Add up to 20 links,
and chose it's %. For instance, if you set 50% on twitter.com and 50% on
facebook.com, you're going to have half of your traffic coming from each of
these sites.
Page 4|5
JINGLING GUIDE
Using Jingling, you can also add a link and configure the amout of visitors
you're going to get. To do that, you will have to switch to the second tab on
Jingling (button #2 on the first image on this post), and click to add a new
website. You're going to end up on this page below
One you have added a link with this tool, the buttons to configure flow based on time
(#6 on my second image) will be disabled. That's normal.
Page 5|5