This document contains the results of a test of the Z axis on a MORI SEKI machine with serial number 002. The test was performed on May 24, 2022 and analyzed the maximum and average reversal and scatter of the Z axis over 2 runs in both directions. Environmental conditions like temperature and pressure were also recorded during the test.
This document contains the results of a test of the Z axis on a MORI SEKI machine with serial number 002. The test was performed on May 24, 2022 and analyzed the maximum and average reversal and scatter of the Z axis over 2 runs in both directions. Environmental conditions like temperature and pressure were also recorded during the test.
This document contains the results of a test of the Z axis on a MORI SEKI machine with serial number 002. The test was performed on May 24, 2022 and analyzed the maximum and average reversal and scatter of the Z axis over 2 runs in both directions. Environmental conditions like temperature and pressure were also recorded during the test.
Machine name MORI SEKI Serial number 002 Targets 17 Linear
Axis under test Z Number of runs 2 Alternate bidir Test date Tuesday 2022/05/24 01:05 PM
ZTZ - Analysis features Environmental conditions
Name Value (µm) Name Start End Min Max Maximum reversal (U max) 100.5 Air temp [°C] 40.4 40.5 40.4 40.5 Maximum scatter (Ps max) 10.6 Air pressure [mbar] 998.80 998.60 998.60 998.80 Mean reversal (U Mean) 83.1 Air humidity [%RH] 47 47 47 47 Mean scatter (Ps mean) 5.9 Material temp 1 [°C] Not recorded Not recorded Positional uncertainty (P) 154.4 Material temp 2 [°C] 39.1 39.2 39.1 39.2 Positional deviation (Pa) 114.8 Material temp 3 [°C] Not recorded Not recorded Expansion coefficient [ppm/°C] 11.70 11.70