Professional Documents
Culture Documents
III.MATERIALS NEEDED:
To accomplish exercises and activities, you need the following: visual aids,
laptop/cellphone, ball pen, paper and/or other writing materials and other available
hand tools and facilities, electrical materials Including STCW 2010 Electro-technology
2by MARTA.
1. During operation of marine boiler make sure all the necessary components is all
identify.
2. Pumps or two feed pumps, make sure only one is in operation.
3. All valves in the designated pipe line to be according to the manuals.
4. Start the pumps for filling up water into the boiler tank.
5. Monitor the sensor device if it is working or not to avoid water spill in water tank.
6. Open and the fuel pump synchronizing boiler ignition switch, igniting atomize fuel in
the chamber.
7. If fire is not present in the chamber ask any person responsible for repair.
8. If working monitor the temperature and temperature at the gauges follow the safety
requirements in accordance with the safety standard manuals.
9. When the required temperature is meet, whatever instruction what circulating pump is
use monitor all electrical control in all pumps, also check all the sensor device for
accurate result of the operations.
2. Closed Circuit – A closed circuit is similar to having
the light switch in the “on” posi5on. Electrons can flow from the power sources to the light, and the light
comes on.
Switching component to protect the over flow of fresh water into the water tank .
2. Closed Circuit – A closed circuit is similar to having
the light switch in the “on” posi5on. Electrons can flow from the power sources to the light, and the light
comes on.
High voltage transformer shown in the picture for the where the primary supply of
voltage is 23 vac transformer it to 20,000vac for the purpose of ignition
2. Closed Circuit – A closed circuit is similar to having
the light switch in the “on” posi5on. Electrons can flow from the power sources to the light, and the light
comes on.