Ail a 18214 182M - 04
such bar, without heat treatment after machining, shall be drawing and straightening permitted (see Supplementary Re-
furnished tothe annealing requirements of Specification A.479/ quirement S3 if annealing must be the final operation.
A4T9M. or this specification, with subsequent light cold
TABLE 1 Heat Trosting Requirements
Austetzing/Sosining | Cooing Quencting Coo “Tempering Temperate,
Grade Heat Tat Type Temperature. rin. F °C)" Moga Below (°C) mF (0),
Low Aloy Stet
mi ‘nea 1650 (00) Turnace coe = =
ometze and temper 1650000] ar col ® 1150 620)
F2 nea 1880 (900) furnace coo : .
ommetze and tmger 1850900] a coo ® 1160 6201
FSF 58 nea 1789 (955) furnace coo ® "
omatze and temper 1750858) a col 5 1250675)
Fo ‘nea 1780 (955) furnace coo ® "
omelzo and temper 1750 (088) ar col . 1250675)
For omatze ad temper 19002000 (1040-1095) ar cool 5 1350 (730
Fo rometze and erger 1900 [1040] a col ® 1350 [790]
ror ometzo and temper 10002000 (1040-1005) ar cool orsqud = 1350 739)
F's, Clas 12,3. anneal 1850 (00) furnace cot 5 o
rommetze and temper 1850900] a cool ® 1150 620)
F 12,Class 1,2 areal 1680 (200) furnace co " "
omatze and temper 1650000] a col 1150 20)
F21,F 3v,and® anneal 1780 (955) furnace con .
‘0b
romatze and temper 1750888) a oot 5 250,675)
F22,Ciass 1,3 areal 1880 (200) furnace co ® "
ometzo and temper 1650 000] ar col . 1250675)
Fa omatze and temper 1900 [1040] i ool 5 1350 (730
‘scceerated coo
F28 romatze and temper 1800880) Sr cot . 135070)
orga
rR nme 1780955) frnace co . .
romatze 1750 (055) ar col o
ometze and temper 1750958) a col 1250675)
avinsie Saivess Sool
rm Tomatze end trper 10007040) ‘a cot . 19501790)
FoaCass1 anneal rot specs furnace coo ® .
omatze end temper nt specod arco 400 205) 1325 725)
temper ot equeed . . 125 725)
Foacass2 anneal ot spect furnace coo . .
omatze end temper nt speed ar col 400 05) 1250675)
temper rot oqured . = 1250 (675)
Foacass3 anneal ot spect furnace coo 5 *
ometze end temper nt specod ar col 400 205) $100 605)
Foaciass4 anneal ot spect furnace coo . .
rormalze end tamper hl speed at coo 00 205) 00040)
Fe nea 1750 (55) furnace coc " "
omatze and temper 1750858) ar col 400 05) 1150 (620)
Fon omatze and treet 1650 [100] at col 200 85) 1040120 (560.6001
Forile Sahioss Stole
Pare nna 1850 (070) ‘umace con = =
Fao snes 1850 (1010) furnace coo 5 5
a0 nea not spect face eo 5 ®