Professional Documents
Culture Documents
Sany Stg190c-8s Motor Grader (Weichai) - 102032
Sany Stg190c-8s Motor Grader (Weichai) - 102032
◆◆ 操控系统灵敏度高于市场同级 30%,
配合大排量作业泵,动作精准有力;
◆◆ 操控机构优化设计,手柄操控省力,
所需力量小于市场同级 10%~15%;
DIMENSIONS
1538
Middle and Rear Wheel Base
后桥离地高度 (mm)
410
Clearance from Rear Axle to Ground
质量载荷参数
Load Spec.
标准型(无配重)(kg)
Standard (without counterweight)
铲刀长 (mm)
Length of Blade
15800
3660(12ft) (standard)
尺寸参数
铲刀高度 (mm) 尺寸代号 名称
620 STG190C-8S(WEICHAI)
Height of Blade Size No. Name
铲刀倾斜角度 (°) 驾驶室顶部高度(mm)
±90 A 3348
Tilt Angle" Height to Top of Cab
作业装置参数
铲刀回转角度 (°) 排气管高度(mm)
Operating Turning Angle
360 B 2717
Device Spec. Height to Exhaust Pipe
铲刀最大提升高度 (mm)
480 铲刀提升油缸顶部高度(mm)
Max. Lift above Ground C 2795
Height to Top of Blade Lift Cylinder
铲刀最大铲土深度 (mm)
630 前桥至铲刀壁间距离(mm)
Max. Depth of Cut D 2568
铲刀切削角范围 (°) Length - Front Axle to Moldboard
25~75 前后桥轴距(mm)
Blade Tip Range" E 6310
挡位数 前6后3 Wheel Base - between Front and Rear Axles
Gears 6 Forward and 3 Reverse 中后轮轴距(mm)
F 1538
前进挡车速 (km/h) Wheel Base - between Middle and Rear Wheel
6/10/13/21/27/42
Forward Speed 前轮至机器后端长度(mm)
后退挡车速 (km/h) G 8775
6/13/27 Length - Front Tire to Rear of Machine
Reverse Speed 全长(mm)标配 / 前推后松
前轮转向角度 (°) H 9265/11295
运动参数 ±45 Overall length - Standard / with Front Dozer Blade and Rear Ripper
Steering Angle of Front Wheel
Running 后轮距(mm)
前轮倾斜角度 (°) I 2280
Spec. Tilt Angle of Front Wheel
±17 Width - Rear Tire Center Lines
前轮外侧宽度(mm)
铰接转向角度 (°) J 2580
±27 Width - Outside Front Tires
Articulated Steering Angle
前桥摆动角度 (°) 后桥离地间隙(mm)
±16 K 410
Oscillation Angle of Front Axle Ground Clearance at Rear Axle
轮胎型号
17.5-25(12PR) (standard)
Model of tire
液压油箱最大容积 (L)
140
油箱容积 Max. capacity of hydraulic oil tank
Tank Capacity 燃油箱最大容积 (L)
350
Max. capacity of fuel tank