Professional Documents
Culture Documents
Segment ring
Spacer ring
Pressure seal
Gasket
1. Mount the pressure seal gasket (in some cases 2 gaskets). Make sure to get the right side down.
Easily push the gasket in place without damaging the gasket.
2. Mount the spacer ring. Easily push the spacer ring in place without damaging the spacer ring. The
spacer ring should be mounted so that the top surface is just beneath the plane surface of the plug.
3. Assemble the segment ring (see 8.3 Assembling the segment ring).
4. Mount the cover plate.
5. Tighten screws.
This document contains proprietary information with all rights and titles reserved and may not be reproduced, disclosed or used in whole or part without
written authorization from Control Components, Inc.