Professional Documents
Culture Documents
DL05/06
PLC
DL105
PLC
Modbus TCP ModbusTCP communications architecture DL205
support PLC
AC Drives
Motors
PLC-to-PLC ECOM100 Configuration IBox NetEdit3 software
communications NetEdit3 Software ships free with the Steppers/
Servos
PLC-to-PLC or PLC to a Modbus TCP ECOM User Manual. Use NetEdit3 to
device communications can be accom- configure the ECOM modules for your Motor
Controls
plished using standard Read from Network network. Flexible addressing allows
(RX) and Write to Network (WX) instruc- you to use your choice of protocols Proximity
tions (all DL05/06 PLCs, all H0 series and identifying methods. Assign each Sensors