Professional Documents
Culture Documents
)54<+8:+8(5>
:UOTY[XKZNGZZNKVXUJ[IZUVKXGZOTMGZOZYHKYZ
VRKGYKXKGJZNOY[YKX’YSGT[GRHKLUXK[YKGTJQKKVOZLUXL[Z[XKXKLKXKTIK
1
2
2
2
3
6
Notice 7-9
10-12
10
10
10
Sleep Setting 11
11
11
12
13
14
This marking consists of two graphical symbols and a warning message. The detailed
specifications are as follows:
To reduce the risk of electric shock, do not remove the cover. Equipment service and
maintenance should only be undertaken by trained personnel.
When not in use for an extended period of time, unplug the power cord from the outlet. Additionally, do not use a damaged power cord.
Do not touch the power cord with wet hands. If there is liquid flowing into the unit, pull out the power cord immediately as it may cause
a fire or electric shock.
Place the unit in a well ventilated area away from heat sources.
1
2
Press to mute the sound of TV audio. Press it
again to restore the sound
3
Make sure the STB is connected properly as below:
4
Refer to your television user's manual if necessary.
5
6
Special Notice
Parental Control
7
Special Notice
RRT Settings
OK
8
Special Notice
9
Press PROG key when the TV is showing
no menu to bring up the channels list (Figure
8). Information about channel numbers,
name and skip status of all channels are
shown here.
10
10
(The numbers indicate the sleep timer in hours.)
11
11
1
NOTE: When under the setting of LOOP THROUGH, the machine will not play the TV program. Antenna
television broadcasting signals will be directly output through the RF OUT terminals. If output
signal isn’t very good in standby, please turn off the power switch of set-top-boxes.
12
13
14